Ashfaqur Rahman

Ashfaqur Rahman

Auto-generated profile, based on publicly available information

Ashfaqur Rahman

Department of Electrical Engineering, University of Arkansas, Fayetteville, AR, USA

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 April 2016 in IEEE Transactions on Electron Devices
Verified
Journal Article
Open access
ARAshfaqur Rahman
Ashfaqur Rahman
AFAnthony Matt Francis
Anthony Matt Francis
SAShamim Ahmed
Shamim Ahmed
SASai Kiran Akula
Sai Kiran Akula
JHJim Holmes
Jim Holmes
AMAlan Mantooth
Alan Mantooth
This paper presents a pair of high-temperature voltage and current references that have been designed in a silicon carbide CMOS process. The circuits presented have been fabricated in two fabrication runs and tested to 300 °C under probe and 540 °C in a packaged form. Test results over a single wafer at multiple sites are given to provide variation over process data. The circuits include a voltage reference with an accuracy of better than 100 ppm/°C and a constant current reference with a variation of ±1 μA at a nominal output of 11 μA from 25 °C to 540 °C.

14 April 2017 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Open access
SRSajib Roy
Sajib Roy
RMRobert C. Murphree
Robert C. Murphree
AAAffan Abbasi
Affan Abbasi
ARAshfaqur Rahman
Ashfaqur Rahman
SAShamim Ahmed
Shamim Ahmed
JDJia Di
Jia Di
This paper describes a silicon carbide pulse width modulation (PWM) signal generator in the 1.2 μm HiT-SiC CMOS process developed by Raytheon Systems Ltd. The design features a 6-b binary input, which allows for setting a system's duty cycle. The results presented in this paper utilize a field programmable gate array board in the test setup to dynamically set the duty cycle by controlling each bit. A control current is also available to give the user added flexibility for tuning the duty cycle. Experimental results show the duty cycle range of the PWM generator to be between 4.7% and 95.2% at 400°C. Sustained operation of the circuit is demonstrated over a period of 50 h at 300°C. Finally, the PWM generator is evaluated in the operation of a boost converter.

30 April 2019 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
RMRobert C. Murphree
Robert C. Murphree
SRSajib Roy
Sajib Roy
SAShamim Ahmed
Shamim Ahmed
MBMatthew Barlow
Matthew Barlow
ARAshfaqur Rahman
Ashfaqur Rahman
JDJia Di
Jia Di
This paper establishes the first integrated silicon carbide (SiC) CMOS linear voltage regulator. The design provides for a continuous load current exceeding 100 mA and a 15 V output from an input voltage of 20 to 30 V. The foundation of the regulator's feedback loop is formed by a two-stage SiC operational amplifier. Both internal and external passive components are used in the frequency compensation network. An external 7.5 V supply is connected to the operational amplifier and acts as the reference voltage. At 400°C, experimental results show a line regulation of better than 1.5 mV/V under a 100-mA load. The load regulation with a 30 V input and at 400°C is shown to be 0.42 mV/mA. Sustained operation of the linear regulator is demonstrated over 30 hours at 300°C.

21 February 2017 in IEEE Transactions on Electron Devices
Verified
Journal Article
Open access
ARAshfaqur Rahman
Ashfaqur Rahman
LCLandon Caley
Landon Caley
SRSajib Roy
Sajib Roy
NKNathan Kuhns
Nathan Kuhns
AMAlan Mantooth
Alan Mantooth
JHJim Holmes
Jim Holmes
This paper presents an 8-b digital to analog converter (DAC) and 8-b analog to digital converter (ADC) for high-temperature applications. The pair of data converters were designed in a 1.2- - m silicon carbide CMOS process and have been tested from 25 °C to 400 °C. At 400 °C, the DAC has a maximum differential nonlinearity (DNL) and integral nonlinearity (INL) error of 1.2 least significant bit (LSB) and 2.7 LSB, respectively, while the offset and the gain error are 5.9 and 2.7 LSB. The ADC has a maximum DNL and INL error of 3.6 and -3 LSB, respectively, while the offset error is -7 LSB and the gain error is 2.6 LSB. The ADC has an SNDR = 32.15 dB and effective number of bits = 5.05 b at 300 °C. The DAC is the first of its kind in silicon carbide CMOS, while the ADC is the first reported at temperatures over 300 °C.

1 November 2015
Verified
Conference Paper
Closed access
ARA. Rahman
A. Rahman
SRS. Roy
S. Roy
RMR. C. Murphree
R. C. Murphree
HMH. A. Mantooth
H. A. Mantooth
AFA. M. Francis
A. M. Francis
JHJ. Holmes
J. Holmes
This paper presents the first operational digital to analog converter at 400°C. The 8 bit R-2R ladder DAC was designed in the Raytheon 1.2 μm CMOS HiTSiC process. The data converter is also the first of its kind in SiC. It has been tested with a supply voltage between 12 V and 15 V, and reference voltages of 5 V to 8 V. At 400°C, the maximum measured differential non linearity (DNL) is 2 LSB (least significant bit) and the integral non linearity is 4.4 LSB.

1 November 2016
Verified
Conference Paper
Closed access
SRS. Roy
S. Roy
RMR. C. Murphee
R. C. Murphee
AAA. Abbasi
A. Abbasi
ARA. Rahman
A. Rahman
HMH. A. Mantooth
H. A. Mantooth
JHJ. Holmes
J. Holmes
This paper describes the design of a SiC pulse width modulation (PWM) signal generator in the HiTSiC ® CMOS process from Raytheon Systems Limited. The high-temperature applications of the circuit include motor control in heavy equipment, deep earth drilling, dc-dc voltage converters and power inverters. The results presented in this paper are for the PWM circuit operating with an input clock frequency of 100 kHz and a supply voltage range of 12 to 15 V. The building blocks for the PWM include a current-starved delay generator, a comparator and XNOR gates. The delay is controlled by a 6-bit binary input that allows the user to dynamically tune the duty cycle. Experimental results show the circuit to have a tunable duty cycle between 16.3% and 84.3% at 400°C.