18 October 2024 in Nature Reviews Materials
25 April 2016 in IEEE Transactions on Electron Devices
This paper presents a pair of high-temperature voltage and current references that have been designed in a silicon carbide CMOS process. The circuits presented have been fabricated in two fabrication runs and tested to 300 °C under probe and 540 °C in a packaged form. Test results over a single wafer at multiple sites are given to provide variation over process data. The circuits include a voltage reference with an accuracy of better than 100 ppm/°C and a constant current reference with a variation of ±1 μA at a nominal output of 11 μA from 25 °C to 540 °C.
30 April 2019 in IEEE Transactions on Power Electronics
This paper establishes the first integrated silicon carbide (SiC) CMOS linear voltage regulator. The design provides for a continuous load current exceeding 100 mA and a 15 V output from an input voltage of 20 to 30 V. The foundation of the regulator's feedback loop is formed by a two-stage SiC operational amplifier. Both internal and external passive components are used in the frequency compensation network. An external 7.5 V supply is connected to the operational amplifier and acts as the reference voltage. At 400°C, experimental results show a line regulation of better than 1.5 mV/V under a 100-mA load. The load regulation with a 30 V input and at 400°C is shown to be 0.42 mV/mA. Sustained operation of the linear regulator is demonstrated over 30 hours at 300°C.
21 December 2018 in IEEE Transactions on Power Electronics
This paper presents a unified physics-based Insulated-Gate Bipolar Transistor (IGBT) compact model which predicts the performance of both Si and SiC, n- and p-channel devices. The model can predict the detailed switching waveforms of these technologies based on its charge-based formulation. Further, this novel IGBT compact model is presented alongside a unique datasheet-driven parameter extraction process. The parameter extraction process enables users to quickly extract model parameters from data typically published without the need of taking physical measurements. The model has been validated with both Si and SiC devices for static and dynamic characteristics. The SiC IGBTs used for validation are a 12.5 kV n-channel device and a 13 kV p-channel device, while the Si IGBT chosen was IXBK55N300 from IXYS. This is the only IGBT model that predicts the performance of both n- and p-channel, Si and SiC devices, providing more freedom for the development of complex power electronics circuit designs. The convergence of the model has been verified by implementing a complex circuit consisting of both a DC-DC converter and a DC-AC inverter. The results presented here show that the unified model can be used to describe the behavior of a wide range of Si and SiC IGBT circuits. This paper is accompanied by a Verilog-A source code and a power point file demonstrating the model parameter extraction sequence.
1 January 2016 in Additional Conferences (Device Packaging, Hitec, Hiten, & Cicmt)
In the last decade, significant effort has been expended towards the development of reliable, high-temperature integrated circuits. Designs based on a variety of active semiconductor devices including junction field effect transistors and metal-oxide-semiconductor field effect transistors have been pursued and demonstrated. More recently1,2, advances in low-power complementary MOS devices have enabled the development of highly-integrated digital, analog and mixed-signal integrated circuits. The results of elevated temperature testing (as high as 500°C) for extended periods (up to 100 hours) of several building block circuits will be presented. These designs, created using the Raytheon UK's HiTSiC® CMOS process, present the densest, lowest-power integrated circuit technology capable of operating at these extreme temperatures for any period of time. Based on these results, Venus nominal temperature (470°C) SPICE m°dels and gate-level timing models were created using parasitic extracted simulations. The complete CMOS digital gate library is suitable for logic synthesis and lays the foundation for complex integrated circuits, such as a microcontroller in SiC-CMOS, with an eye for Venus as well as terrestrial applications.