In organic thin‐film transistors (TFTs) fabricated in the inverted (bottom‐gate) device structure, the surface roughness of the gate dielectric onto which the organic‐semiconductor layer is deposited is expected to have a significant effect on the TFT characteristics. To quantitatively evaluate this effect, a method to tune the surface roughness of a gate dielectric consisting of a thin layer of aluminum oxide and an alkylphosphonic acid self‐assembled monolayer over a wide range by controlling a single process parameter, namely the substrate temperature during the deposition of the aluminum gate electrodes, is developed. All other process parameters remain constant in the experiments, so that any differences observed in the TFT performance can be confidently ascribed to effects related to the difference in the gate‐dielectric surface roughness. It is found that an increase in surface roughness leads to a significant decrease in the effective charge‐carrier mobility and an increase in the subthreshold swing. It is shown that a larger gate‐dielectric surface roughness leads to a larger density of grain boundaries in the semiconductor layer, which in turn produces a larger density of localized trap states in the semiconductor.
One of the circuit topologies for the implementation of unipolar integrated circuits (circuits that use either p-channel or n-channel transistors, but not both) is the zero- VGS architecture. Zero- VGS circuits often provide excellent static performance (large small-signal gain and large noise margins), but they suffer from the large signal delay imposed by the load transistor. To address this limitation, we have used electron-beam lithography to fabricate zero- VGS circuits based on organic transistors with channel lengths as small as 120 nm on flexible polymeric substrates. For a supply voltage of 3 V, these circuits have characteristic signal-delay time constants of 14 ns for the low-to-high transition and 560 ns for the high-to-low transition of the circuit’s output voltage. These signal delays represent the best dynamic performance reported to date for organic transistor–based zero- VGS circuits. The signal-delay time constant of 14 ns is also the smallest signal delay reported to date for flexible organic transistors.
Organic thin‐film transistors (TFTs) that provide subthreshold swings near the theoretical limit together with large on/off current ratios at very low operating voltages require high‐capacitance gate dielectrics with a vanishingly small defect density. A promising approach to the fabrication of such dielectrics at temperatures sufficiently low to allow TFT fabrication on polymeric substrates are hybrid dielectrics consisting of a thin metal oxide layer in combination with a molecular self‐assembled monolayer (SAM). Here, the electrical and surface properties of titanium oxide produced by the plasma‐assisted oxidation of the surface of vacuum‐deposited titanium gate electrodes and its use as the first component of a hybrid TiOx/SAM gate dielectric in flexible organic TFTs are investigated. These transistors have a gate‐dielectric capacitance of about 1 µF cm−2, a subthreshold swing of 59 mV decade−1 (within measurement error of the physical limit at room temperature) for a wide range of channel lengths as small as 0.7 µm, and an on/off current ratio of 107 for a gate‐source‐voltage range of 1 V.
A critical requirement for the application of organic thin-film transistors (TFTs) in mobile or wearable applications is low-voltage operation, which can be achieved by employing ultrathin, high-capacitance gate dielectrics. One option is a hybrid dielectric composed of a thin film of aluminum oxide and a molecular self-assembled monolayer in which the aluminum oxide is formed by exposure of the surface of the aluminum gate electrode to a radio-frequency-generated oxygen plasma. This work investigates how the properties of such dielectrics are affected by the plasma power and the duration of the plasma exposure. For various combinations of plasma power and duration, the thickness and the capacitance of the dielectrics, the leakage-current density through the dielectrics, and the current–voltage characteristics of organic TFTs in which these dielectrics serve as the gate insulator have been evaluated. The influence of the plasma parameters on the surface properties of the dielectrics, the thin-film morphology of the vacuum-deposited organic-semiconductor films, and the resulting TFT characteristics has also been investigated.
A method for extracting the density and energetic distribution of the trap states in the semiconductor of a field-effect transistor from its measured transfer characteristics is investigated. The method is based on an established extraction scheme [M. Grünewald et al., Phys. Stat. Sol. B 100, K139 (1980)] and extends it to low-voltage thin-film transistors (TFTs). In order to demonstrate the significance of this extension, two types of TFTs are fabricated and analyzed: one with a thick gate dielectric and high operating voltage and one with a thin gate dielectric and low operating voltage. From the measured transfer characteristics of both TFTs, the density of states (DOS) is calculated using both the original and the extended Grünewald method. The results not only confirm the validity of the original Grünewald method for high-voltage transistors, but also indicate the need for the extended Grünewald method for the reliable extraction of the trap DOS in transistors with a thin gate dielectric and low operating voltage.