Oleksandr Holotenko

Oleksandr Holotenko

Auto-generated profile, based on publicly available information

Oleksandr Holotenko

Department of Computer-Integrated Technologies, Ternopil Ivan Puluj National Technical University, Ternopil, Ukraine

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2025 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
АСАлександр Александрович Сапронов
Александр Александрович Сапронов
ABAndriy Buketov
Andriy Buketov
Pavlo MaruschakPavlo Maruschak
Pavlo Maruschak
SZSerhii Zinchenko
Serhii Zinchenko
OSOlga Syzonenko
Olga Syzonenko
DNDmytro Nahovskyi
Dmytro Nahovskyi
The thermophysical properties of polymeric materials filled with the refractory compounds titanium carbide (TiC) and ferrite (Fe 3 C) were studied using thermogravimetric and differential thermal analysis. These techniques allow structural transformations in modern materials to be assessed. Composites containing an active additive at a concentration of q = 0.100 wt% exhibit the lowest relative mass loss ( ε m = 65.3%), due to the formation of a significant number of bonds between the polymer components and redistribution of thermal energy within the polymer volume. Comprehensive studies of the thermal stability parameters ( T i , T f i n , T max , and T 0 ) established the course of physicochemical processes during the thermal degradation of filled composites. The activation energy increased by 1.2 times. The thermal stability of the developed polymers containing 0.100 wt% particles of the synthesized iron/TiC mixture increases from 587 K to 612 K. The rational introduction of the filler into the polymer matrix increases the stiffness of the segments and the main chain due to the presence of TiC (20%) and Fe 3 C (5%), which are formed after high‐voltage electric discharge (HVED) synthesis. The active particles of refractory compounds serve as centers for the formation of an additional spatial polymer network, ensuring the redistribution of thermal energy within the polymer volume. It has been proven that the key parameter affecting the permissible temperature range of the developed polymers is the initial exoeffect temperature (Ti), which is 485.4 K.

22 August 2025 in Key Engineering Materials
Verified
Journal Article
Closed access
PDF file
ABAndriy Buketov
Andriy Buketov
OLOleg Lyashuk
Oleg Lyashuk
YSYuri Shulga
Yuri Shulga
OSOlga Syzonenko
Olga Syzonenko
ISIhor Sieliverstov
Ihor Sieliverstov
MSMariana Sokol
Mariana Sokol
Nowadays, the application of protective coatings based on polymer materials is a widespread method of protecting products and parts of water transport from the effects of various environments and is used to increase their service life after repair and restoration work. Application as a base for polymer composite materials based on epoxy resins is considered relevant. To improve the adhesive and mechanical characteristics of polymer composites, their physical and chemical modification was carried out. In particular, it is promising from a practical point of view to introduce into the epoxy resin a microdispersed filler of synthesized aluminum-copper charge (SACC) with a negligible content. It was established that in order to obtain protective coatings or products for increasing the resource of water transport with increased indicators of adhesive and cohesive characteristics, it is necessary to form a composite with the following number of ingredients: epoxy oligomer – 100% by mass; hardener PEPA – 10% by mass; microdisperse filler synthesized aluminum-copper charge – 2 % by mass. The mechanism of activation of interphase interaction during crosslinking of materials due to the formation of chemical bonds between side groups and segments of the epoxy oligomer and active centers on the surface of particles, such as Al+, Cu+, CuAl2 and Al4C3 is substantiated. It is shown that the adhesive-cohesive properties of materials depend mainly on the volume of the boundary surface layers that are formed around the filler particles during the polymerization of composites. The density of such layers differs from the density of the initial ingredients - polymer and filler and is determined by the following criteria: the level of wetting of the dispersed particles with a low-viscosity Newtonian oligomer, their dispersion and specific surface area, the presence of active centers on the surface. A model of the formation of epoxy composites in the presence of a dispersed filler is proposed. The model assumes the gradual formation of boundary surface layers around filler particles. In particular, it is shown the possibility of forming a network structure of a polymer with supramolecular globular inclusions in a polymer system without a filler, as well as successive stages of structure formation of composites in the presence of a filler.

27 February 2025 in Measuring and computing devices in technological processes
Verified
Journal Article
Open access
PDF file
СКСергій Кульчицький
Сергій Кульчицький
ОГОлександр Голотенко
Олександр Голотенко
АСАндрій Станько
Андрій Станько
Інтеграція супутникових і наземних бездротових мереж розглядається як ключове рішення для забезпечення глобальної покриття і стійкості зв’язку в еру 5G та наступних поколінь. У цій роботі проаналізовано сучасні архітектурні концепції побудови гібридних супутниково-наземних мереж та визначено основні виклики, що постають при їх об’єднанні. Розглянуто перспективні технології і стандарти, зокрема неназемні мережі (NTN) у 5G, погляд на інтеграцію в майбутніх системах 6G, а також роль угруповань низькоорбітальних (LEO) супутників. Проведено аналіз прикладів реалізації інтегрованих систем – глобальних широкосмугових проєктів Starlink, OneWeb та Amazon Kuiper, з акцентом на їх архітектуру та досягнуті результати. На основі останніх досліджень і проєктів показано, що попри значні технічні перешкоди (затримки, доплерівський зсув, інтерференція, інфраструктурні та регуляторні проблеми), тенденції розвитку технологій мережевого керування, стандартів 3GPP та прогрес у виробництві супутників роблять інтеграцію супутникових і наземних мереж все більш досяжною.

28 October 2026 in Structural Integrity and Life
Verified
Journal Article
Closed access
IDIryna Didych
Iryna Didych
OYOleh YASNIY
Oleh YASNIY
DTDmytro Tymoshchuk
Dmytro Tymoshchuk
OHOleksandr Holotenko
Oleksandr Holotenko
VBViktor Boichun
Viktor Boichun
Fatigue crack growth rate is modelled by neural network and compared with analytical models, namely, the Paris' law and polynomial log regressions of the second to fifth degree. To assess the accuracy of the modelling, the determination coefficient R², mean absolute error (MAE) and mean absolute percentage error (MAPE) are used to assess the accuracy of the modelling. Results show that both approaches, in particular, the classical analytical models and the neural network, provide the high accuracy of approximation of the experimental data. At the same time, the neural network demonstrates an advantage in the region of high values of DK, where a nonlinear acceleration of crack growth is observed, reaching a coefficient of determination R² equal to 0.9994. The presented approach confirms the effectiveness of applying machine learning methods, in particular neural networks, in the problems of fracture mechanics and fatigue analysis.