22 March 2018 in Journal of Lightwave Technology
Dramatic increase in data traffic and future diffusion of bandwidth-hungry 5G connectivity and evolving services like virtual reality and cloud will require the implementation of the open and elastic network paradigm on backbone optical networks. To support such growth, operators are aiming at lowering optical network costs by deploying multi-vendor disaggregated optical networks supporting white boxes while maintaining target performances. To make this effort successful, a vendor-agnostic assessment of optical performance is needed, and operators and vendors are working together to achieve this. In this paper, we present the vision of the Open Optical Packet Transport - Physical Simulation Environment (OOPT-PSE) Group of the Telecom Infra Project (TIP) consortium that aims at developing an open source framework for Quality-of-Transmission (QoT) assessment for design and operation of multi- vendor optical networks. We validate the PSE QoT estimator - the optical link emulator (OLE) based on the GN-model for nonlinear fiber propagation - by comparison with experimental results on the mixed-fiber test-bed network at Microsoft labs, operated in the C-band by commercial transceivers from eight different vendors, with propagation distances up to 1945 km. An excellent agreement between OLE predictions requiring milliseconds of computational time and measurements has been observed for all channels. The observed $\pm$0.75 dB of accuracy in OLE predictions can be further reduced by including the stimulated Raman Scattering in the GN-model and with a more accurate capability to estimate power levels and the amount of ASE noise. Further work will be also required to automate the measurement process of operational parameters from network equipment, especially optical amplifiers, to streamline the overall QoT estimation process.
1 February 2022 in IEEE Photonics Technology Letters
In this work, a cognitive Raman amplifier controller using an evolutionary optimization strategy for both in-field device calibration and optimal pump power configuration design is presented. The conceived methodology allows to jointly characterize the physical layer properties of the optical fiber span, such as the fiber attenuation profile, the entities of the lumped losses due to mechanical connectors or splices, the polarization coefficients between each Raman pump pair and the Raman efficiency curve. The developed framework expects to work using optical channel monitors (OCMs) as telemetry device and it has been experimentally validated, obtaining outstanding results in terms of precision on a C-band setup.
19 March 2021 in IEEE Open Journal of the Communications Society
Increasing traffic demands are causing network operators to adopt disaggregated and open networking solutions to better exploit optical transmission capacity, and consequently enable a software-defined networking (SDN) approach to control and management that encompasses the WDM data transport layer. In these frameworks, a quality of transmission estimator (QoT-E) that gives the generalized signal-to-noise ratio (GSNR) is commonly used to compute the feasibility of transparent lightpaths (LP)s, taking into account the amplified spontaneous emission (ASE) noise and the nonlinear interference (NLI). In general, the ASE noise is the main contributor to the GSNR and is also the most challenging noise component to evaluate in a scenario with varying spectral loads, due to fluctuations in the optical amplifier responses. In this work, we propose a machine learning (ML) algorithm that is trained using different ASE-shaped spectral loads in order to predict the OSNR component of the GSNR; this methodology is subsequently used in combination with a QoT-E in the lightpath computation engine (L-PCE). We present an experiment on a point-to-point optical line system (OLS), including 9 commercial erbium-doped fiber amplifiers (EDFA)s used as black-boxes, each with variable gain and tilt values, and 8 fibers that are characterized by distinct physical parameters. Within this experiment, we receive the signal at the end of the OLS, measuring the bit-error-rate (BER) and the power spectrum, over 2520 different spectral loads. From this dataset, we extract the expected GSNRs and their linear and nonlinear components. Through joint application of a ML algorithm and the open-source GNPy library, we obtain a complete QoT-E, demonstrating that a reliable and accurate LP feasibility predictor may be implemented.
30 November 2023 in IEEE Photonics Technology Letters
Relying on a two-measurement characterization, in this work a simple and effective gain profile model for dual-stage optical erbium-doped fiber amplifiers (EDFAs) working under full spectral load conditions is presented and validated. Starting from the model of an ideal EDFA, the gain ripple profile is determined as the target parameters of the amplifier vary using a linear combination of two contributions. Being a consequence of the absorption/emission curves of erbium in the two stages, the first represents a characteristic of the specific device and reflects also the residual impact due to the gain flattening filter (GFF), while the second parameter accounts for a feature of the considered amplifier model, scaling according to the set tilt target. The proposed model faithfully reproduces the dynamics of EDFA by varying the total input power and the target gain and tilt parameters, as shown experimentally on a set of 14 devices divided into 4 different models from 2 vendors, of which 10 in C-band and 4 in L-band. The obtained error distributions present an unbiased peak shape with variability between the 25 and 75 percentiles below 0.2 dB for the worst case in C-band and 0.1 dB in L-band, respectively.