Leonardo Sito

Leonardo Sito

Auto-generated profile, based on publicly available information

Leonardo Sito

CERN

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 February 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
VMVincenzo Romano Marrazzo
Vincenzo Romano Marrazzo
Francesco FiengaFrancesco Fienga
Francesco Fienga
LSLeonardo Sito
Leonardo Sito
NBNoemi Beni
Noemi Beni
ZSZoltan Szillasi
Zoltan Szillasi
Giovanni BreglioGiovanni Breglio
Giovanni Breglio
In this work, experimental tests of a full analog fiber optic monitoring system are reported. The proposed concept is conceived to satisfy the constraints imposed to be used for safety application, in terms of robustness and reliability, due to full passive optical devices and analog-based circuitry. Moreover, it is compatible with the stringent requirements imposed by the detector safety system (DSS) of the Compact Muon Solenoid (CMS) experiment at CERN. From the optical side, the main device is the arrayed waveguide grating (AWG), with the aim to filter and address the optical signal through a determined output channel, that is then transduced in electrical by means of a photodiode. From the electronic side, the designed board has the purpose to manipulate the signal in order to have an increasing monotone output current, in the range of 4–20 mA, a standard widely employed in a safety system environment. In this way, the circuit gain can be set in order to match the value to the physical quantity under the monitoring threshold. To give proof of its characteristics, the system is subjected to many tests led at CERN, in which two fiber Bragg grating (FBG) sensors are under test in a custom climate box. Step temperature variation, as well as fast oscillating test and long-term stability measurement are reported, confirming its key strength and field-validating it.

6 June 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
Francesco FiengaFrancesco Fienga
Francesco Fienga
VMVincenzo Romano Marrazzo
Vincenzo Romano Marrazzo
LSLeonardo Sito
Leonardo Sito
FGFrancesco Giordano
Francesco Giordano
NBNoemi Beni
Noemi Beni
Giovanni BreglioGiovanni Breglio
Giovanni Breglio
In the field of accelerator physics it is crucial to account for heating caused by the passage of high intensity beams into accelerator components. This phenomenon is known as Radio Frequency (RF) Beam Induced Heating (BIH) and requires, other than an accurate design stage, to constantly monitor temperature-related parameters during the accelerator operations. This enables to warn for critical malfunctions and to prevent possible damages. Monitoring needs to meet various requirements, such as multiplexing capabilities, distributed sensing possibilities, and robustness in harsh environments. Fiber Bragg Grating sensors (FBGs) have been proven to be an ideal solution that meets all these requirements. This study aims to validate the use of FBGs for direct measurement of RF BIH. A section of the beam pipe in the CERN Large Hadron Collider was modeled in terms of impedance, and the resulting RF BIH was computed based on the traveling beam. The results of the numerical simulation were compared with experimental data obtained by FBGs installed along the beam pipe. The analysis shows that FBGs can be a valuable beam diagnostic tool for monitoring accelerated high energy particle beams by measuring RF BIH and may provide useful insights for improving the design and operation of future accelerators. The study highlights the significant advancements of FBG technology in direct temperature measurement and assessment of RF BIH and serves as a promising solution for mitigating RF BIH in the demanding environment of particle accelerators.

1 May 2024 in Journal of Instrumentation
Verified
Journal Article
Open access
NMN. Mounet
N. Mounet
RGRogelio Tomas Garcia
Rogelio Tomas Garcia
DAD. Amorim
D. Amorim
CAC. Antuono
C. Antuono
NBN. Biancacci
N. Biancacci
CZC. Zannini
C. Zannini
The High Luminosity (HL-LHC) project aims to increase the integrated luminosity of CERN's Large Hadron Collider (LHC) by an order of magnitude compared to its initial design. This requires a large increase in bunch intensity and beam brightness compared to the first three LHC runs, and hence poses serious collective-effects challenges, related in particular to electron cloud, instabilities from beam-coupling impedance, and beam-beam effects. Here, we present the associated constraints and the mitigation measures proposed to achieve the baseline performance of the upgraded LHC machine. We also discuss the interplay of these mitigation measures with other aspects of the accelerator, such as optics, physical and dynamic apertures, the collimation system, and crab cavities. Additional potential sources of intensity limitations are also briefly discussed.

17 April 2025 in Physical Review Accelerators and Beams
Verified
Journal Article
Open access
CAC. Antuono
C. Antuono
PKPatrick Krkotić
Patrick Krkotić
EGE. de la Fuente Garcia
E. de la Fuente Garcia
CZC. Zannini
C. Zannini
CSCalatroni Sergio
Calatroni Sergio
LSL. Sito
L. Sito
During the third run of the Large Hadron Collider in 2023, which had the highest intensity bunch population compared to previous runs, a beam dump incident with operational delays occurred due to increased losses attributed to pressure spikes within a warm vacuum sector. Subsequent inspections revealed localized annealing and plasticization of the tension spring in the sliding contact radio frequency finger of a 212 mm diameter vacuum module, alongside traces of vapor deposition on the various module components with the stainless steel spring material. A comprehensive analysis involving vacuum and beam impedance studies was conducted to investigate the triggering mechanisms behind the warm vacuum module failure. The findings indicate localized beam-induced heating, which could lead to the annealing of the spring with a consequent cascade of effects. Systematic studies of a similar possible failure mechanism for other sizes of vacuum modules were also conducted. Additionally, investigations into potential mitigation measures were performed.

12 September 2024 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Open access
CAChiara Antuono
Chiara Antuono
LSLeonardo Sito
Leonardo Sito
ECEleonora Calzone
Eleonora Calzone
DDD. el Dali
D. el Dali
Mauro MiglioratiMauro Migliorati
Mauro Migliorati
CZCarlo Zannini
Carlo Zannini
In high-energy particle accelerators, circulating particle beams with high intensity interact electromagnetically with their surroundings (i.e. metallic vacuum chambers of various geometries). These electromagnetic interactions, which are typically described through the concept of beam-coupling impedance, can represent a serious issue in terms of stability of the particle beam and heating on the accelerator structures. It is therefore crucial to account for beam-coupling impedance through simulations and measurements during the design phase of an accelerator component. However, standard methods used in the accelerator field have known limitations due to the perturbations that they induce in the device geometry. Thus, the bead-pull method, which is a possible alternative approach, is presented in this study. The longitudinal beam-coupling impedance measurement technique is introduced, and it is further developed for novel use in transverse impedance measurements.