The resistive wall impedance of a vacuum chamber with elliptic cross section is of particular interest for circular particle accelerators as well as for undulators in free electron lasers. By using the electric field of a point charge and of a small dipole moving at arbitrary speed in an elliptical vacuum chamber, expressed in terms of Mathieu functions, in this paper we take into account the finite conductivity of the beam pipe walls by means of the surface impedance, and evaluate the longitudinal and transverse driving and detuning impedances for any beam velocity. We also extend the definition of the Yokoya form factors, valid in the thick wall regime, at any beam energy, and show that, in the ultra-relativistic limit, they coincide with the ones that are found in literature. The method is also extended to the multilayer vacuum chamber case. Under conditions generally satisfied with particle accelerator beam pipes, the classical transmission line theory can be used to modelling the impedance seen by a bunch in a vacuum chamber with several layers as an equivalent circuit with the same number of load impedances, giving, as result, a surface impedance that can be used in combination with the fields of the elliptic geometry to obtain the resistive wall impedance in an elliptical multilayer vacuum chamber. The results are also compared with a more time consuming 3D electromagnetic code and with solutions for known cases of circular and flat beam pipe.
31 December 2019 in Physical Review Accelerators and Beams
The CERN Proton Synchrotron Booster (PSB) has been known to suffer from horizontal instabilities since its early operation in the 1970s. These instabilities appear at specific beam energies and range of working points. The source of the instability and the reason why the instabilities appear at specific energies remained unidentified. However, in routine operation, the instabilities have not been limiting the PSB performance reach thanks to the use of a horizontal feedback system, which can suppress their onset for all beam intensities needed in the PSB. Recently, the interest in these instabilities has been revived by the ongoing LHC Injectors Upgrade (LIU) program, as well as, the Physics Beyond Colliders (PBC) study group. In fact, the PSB is being upgraded to a new energy range and higher beam intensities will be requested in future operation. To ensure that these instabilities will not limit the PSB performance in the future parameter range, a systematic characterization has been carried out through several measurements and models. At fixed energy, the dependence of the instability on the working point has been fully studied experimentally. Macroparticle simulations and analytical modeling have been applied to explain the measurements, suggesting that the main driving term behind these instabilities is the unmatched termination of the PSB extraction kickers. Analytical studies also explained for the first time why the instability appears at specific energies in the PSB cycle and showed that no other instability is expected above 1.4 GeV. Finally, the hypothesis on the main instability driving term has been verified experimentally by performing measurements with the kicker terminations temporarily matched. In this configuration, no sign of instability was observed and the extraction kicker could be unambiguously identified as the source of the instability. Some options to permanently suppress the source of the instability are proposed.
The High Luminosity Large Hadron Collider (HL-LHC) project will upgrade the LHC machine to allow operation with increased luminosity for the experiments. In order to achieve this goal, different operational parameters of the machine need to be pushed beyond the present design values, including the stored beam energy. One of the main challenges related to the achievement of the upgraded performance is the beam collimation system and its contribution to the overall machine impedance budget. In this perspective, new low impedance collimators have been designed, fabricated, and installed in the LHC. In this study, we will present their detailed electromagnetic (EM) characterization by means of radio frequency (RF) measurements and EM simulations.
1 April 2021 in Physical Review Accelerators and Beams
This paper deals with the determination of the wake-function, impedance and energy loss due to surrounding accelerator components of two countermoving beams, i.e., two beams moving in opposite directions. Differently from the classical case, the distance between source and test charges cannot be considered constant. The paper defines a generalized wake-function, independent of the source and test particle’s direction of motion. From this generalized wake-function a wake-potential is derived. The paper focuses in particular on the longitudinal direction. The expression of the energy dissipated by two beams transiting in the same vacuum chamber is obtained. This expression is valid both in the comoving and countermoving beam scenario. Subsequently, the proposed model is benchmarked by calculating the longitudinal co and countermoving wake-functions, the corresponding impedances and wake-potentials for two simple geometries (a circular pipe and a pillbox cavity) traversed by two countermoving beams, and by comparing the results with the ones of the electromagnetic code CST Studio Suite. Finally, for the pillbox geometry, the energy loss of the two countermoving beams and their rf-heating are investigated.
17 April 2025 in Physical Review Accelerators and Beams
During the third run of the Large Hadron Collider in 2023, which had the highest intensity bunch population compared to previous runs, a beam dump incident with operational delays occurred due to increased losses attributed to pressure spikes within a warm vacuum sector. Subsequent inspections revealed localized annealing and plasticization of the tension spring in the sliding contact radio frequency finger of a 212 mm diameter vacuum module, alongside traces of vapor deposition on the various module components with the stainless steel spring material. A comprehensive analysis involving vacuum and beam impedance studies was conducted to investigate the triggering mechanisms behind the warm vacuum module failure. The findings indicate localized beam-induced heating, which could lead to the annealing of the spring with a consequent cascade of effects. Systematic studies of a similar possible failure mechanism for other sizes of vacuum modules were also conducted. Additionally, investigations into potential mitigation measures were performed.
12 September 2024 in IEEE Transactions on Instrumentation and Measurement
In high-energy particle accelerators, circulating particle beams with high intensity interact electromagnetically with their surroundings (i.e. metallic vacuum chambers of various geometries). These electromagnetic interactions, which are typically described through the concept of beam-coupling impedance, can represent a serious issue in terms of stability of the particle beam and heating on the accelerator structures. It is therefore crucial to account for beam-coupling impedance through simulations and measurements during the design phase of an accelerator component. However, standard methods used in the accelerator field have known limitations due to the perturbations that they induce in the device geometry. Thus, the bead-pull method, which is a possible alternative approach, is presented in this study. The longitudinal beam-coupling impedance measurement technique is introduced, and it is further developed for novel use in transverse impedance measurements.