In the field of accelerator physics it is crucial to account for heating caused by the passage of high intensity beams into accelerator components. This phenomenon is known as Radio Frequency (RF) Beam Induced Heating (BIH) and requires, other than an accurate design stage, to constantly monitor temperature-related parameters during the accelerator operations. This enables to warn for critical malfunctions and to prevent possible damages. Monitoring needs to meet various requirements, such as multiplexing capabilities, distributed sensing possibilities, and robustness in harsh environments. Fiber Bragg Grating sensors (FBGs) have been proven to be an ideal solution that meets all these requirements. This study aims to validate the use of FBGs for direct measurement of RF BIH. A section of the beam pipe in the CERN Large Hadron Collider was modeled in terms of impedance, and the resulting RF BIH was computed based on the traveling beam. The results of the numerical simulation were compared with experimental data obtained by FBGs installed along the beam pipe. The analysis shows that FBGs can be a valuable beam diagnostic tool for monitoring accelerated high energy particle beams by measuring RF BIH and may provide useful insights for improving the design and operation of future accelerators. The study highlights the significant advancements of FBG technology in direct temperature measurement and assessment of RF BIH and serves as a promising solution for mitigating RF BIH in the demanding environment of particle accelerators.
1 April 2021 in Physical Review Accelerators and Beams
This paper deals with the determination of the wake-function, impedance and energy loss due to surrounding accelerator components of two countermoving beams, i.e., two beams moving in opposite directions. Differently from the classical case, the distance between source and test charges cannot be considered constant. The paper defines a generalized wake-function, independent of the source and test particle’s direction of motion. From this generalized wake-function a wake-potential is derived. The paper focuses in particular on the longitudinal direction. The expression of the energy dissipated by two beams transiting in the same vacuum chamber is obtained. This expression is valid both in the comoving and countermoving beam scenario. Subsequently, the proposed model is benchmarked by calculating the longitudinal co and countermoving wake-functions, the corresponding impedances and wake-potentials for two simple geometries (a circular pipe and a pillbox cavity) traversed by two countermoving beams, and by comparing the results with the ones of the electromagnetic code CST Studio Suite. Finally, for the pillbox geometry, the energy loss of the two countermoving beams and their rf-heating are investigated.
The High Luminosity Large Hadron Collider (HL-LHC) project will upgrade the LHC machine to allow operation with increased luminosity for the experiments. In order to achieve this goal, different operational parameters of the machine need to be pushed beyond the present design values, including the stored beam energy. One of the main challenges related to the achievement of the upgraded performance is the beam collimation system and its contribution to the overall machine impedance budget. In this perspective, new low impedance collimators have been designed, fabricated, and installed in the LHC. In this study, we will present their detailed electromagnetic (EM) characterization by means of radio frequency (RF) measurements and EM simulations.
16 December 2019 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment