In the present work, the properties of cellulose extracted from mendong fiber have been investigated. The experiments were conducted by two different methods to extract the cellulose from mendong fiber, which is extracted by alkali and alkali assisted by PEF. The cellulose was analyzed using X-ray diffraction, Fourier Transform Infra Red, Thermogravimetric Analysis, and compared with cellulose of commercial product. The morphology of cellulose after extraction was observed using both optical and Scanning Electron Microscope. The crystalline structure properties of cellulose extracted from mendong fiber assisted by pulsed electric field (PEF) were similar to the commercial cellulose.
17 October 2022 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Photovoltaic thermal systems (PVT) are solar energy conversion systems that produce both electricity and heat simultaneously. PVT systems seeking to minimize temperature of solar cells become more significant with the increased thermal and electrical efficiency of the working fluids (water and nanofluids) employed in the solar thermal system. The major objective of this research is to investigate the thermal, electrical and overall performance of the photovoltaic thermal (PVT) system with different weight fractions of MWCNT/water nanofluids (φ = 0.3%, 0.6% and 1%) and water. A sheet and tube PVT system model geometry, which has been simplified to rectangular PV cell, absorber plate, cylindrical pipe, and fluid domain geometries to investigate outlet and PV cell temperature of photovoltaic thermal (PVT) system between different weight fractions of MWCNT/water nanofluids (φ = 0.3%, 0.6% and 1%) and water with varying fluid inlet velocities from 0.02 m/s to 0.08 m/s using ANSYS FLUENT. The results show that increasing the inlet fluid velocity and weight fraction of the working fluid improves thermal and electrical efficiency. The highest improvement in thermal and electrical efficiency at 0.08m/s inlet fluid velocity for the weight fractions, φ = 1% of MWCNT/water nanofluids is 7.8% and 0.03% compared to water. In addition, the weight fractions, φ = 0.3% of MWCNT/water nanofluids is 4.46% and 0.01% and the weight fractions, φ = 0.6% of MWCNT/water nanofluid is 6.72% and 0.02%. Additionally, the maximum increase of overall efficiency at 0.08m/s inlet fluid velocity for the weight fractions, φ = 1% of MWCNT/water nanofluids is 7.83% compared to water while the weight fractions, φ = 0.3% of MWCNT/water nanofluids is 4.43% and the weight fractions, φ = 0.6% of MWCNT/water nanofluid is 6.74% at inlet fluid velocity of 0.08 m/s. As a result of the research, it was discovered that using MWCNT/water nanofluids improves the performance of PVT systems.
17 April 2019 in IOP Conference Series: Materials Science and Engineering
Floating blade water wheel turbine is a development design of goose leg turbine which has been studied in the previous year. This water turbine has a specialty on its blade ability that can open and close like a goose leg. This study employed the Taguchi method to obtain the optimum design parameters on the floating blade water wheel turbine. There were 3 factors used, they are water flow rate with 4 levels (35; 40; 45; 50 l/min), number of buckets with 2 levels (4 and 6 units), and the shape of the blade with 2 levels (concave and flat) which was predicted to affect the turbine performance. The response or dependent variable used was the turbine efficiency. According to factors and levels that have been determined, orthogonal array used in this study is L16. Orthogonal Array is a matrix that used in Taguchi method to determine the minimum number of experiments that can provide information about factors which affect the parameter response. According to ANOVA results, they indicated the factors affecting the optimum quality characteristics of the turbine performance are the number of buckets with the contribution of 68.13%, the blade shape with the contribution of 23.28%, water flow rate with the contribution of 7.35%, and the 1, 25% is the other factors. According to Taguchi method, the optimum parameter design was a turbine with 6 blades, convex blade shape, and water flow rate at 50 l/m that yielded turbine efficiency as much as 3.999%.
10 June 2021 in Bulletin of Chemical Reaction Engineering & Catalysis
Photovoltaic thermal (PVT) is a technology capable of converting solar energy into energy in the form of electricity and thermal (heat). Absorption of solar thermal energy can cause PVT to experience a high temperature increase which affects the efficiency of electricity that can be generated by PVT. Nanofluid is a fluid with high thermal conductivity that can be used as a coolant to absorb the high temperature generated by PVT and recover some of the energy lost as heat to increase the efficiency of PVT. The combination of two nanoparticles as a hybrid nanofluid was produced by mixing 1000 ml distilled water with TiO2/Al2O3 hybrid nanoparticles (80:20) of 0.1% with irradiation time for 60 minutes using light intensity of 1200 W/m2. The results showed that TiO2 nanofluid had the best thermal and electrical efficiency compared to hybrid nanofluid, Al2O3 nanofluid, and distilled water. Thermal efficiency decreased due to the long irradiation time with constant intensity causing ineffective cooling over time, while electrical efficiency increased due to heat reduction on the PVT surface, but after 15 minutes there was a decrease in electrical efficiency caused by the PVT surface overheating.
19 June 2023 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Thermal management is essential in photovoltaic (PV) systems for enhancing PV performance. Passive cooling with a phase transition material (PCM) is one method for managing overheated PV. Crude palm oil (CPO) is preferred in Malaysia since it is both sustainable and inexpensive. To assess the feasibility of CPO as a PCM, a parametric analysis focusing on the PV-PCM tilt angles, PCM thickness, and PCM encapsulation material was carried out numerically. ANSYS computational fluid dynamics software is used in this work. The two-dimensional model is used to simulate a monocrystalline PV surface with macro-encapsulated PCM placed among two aluminium layers. Each parametric analysis's temperature distribution on PV surfaces and temperature contour for PV-PCM for tilting angle and PCM thickness are also discussed. Validation work was also performed with 9.73% errors that were within the allowed range. The result reveals that when the tilt angle is near-vertical (90o) the natural convection flows more rapidly. The system's average front surface appears to achieve the melting point completely faster. The optimum thickness for CPO to perform is 80mm, which can store heat for around 4000s (66.67mins). Aluminium outperforms stainless steel and copper as a PCM encapsulant since it facilitated the melting process by absorbing more heat. CPO with 80mm thickness, aluminium encapsulated, and vertical orientation has significant potential for thermoregulation in systems, especially in Malaysian weather (27oC).