Low specific speed centrifugal pumps exhibit narrow and long impeller flow channels that induce internal flow instability, leading to pump oscillation, noise, and inefficiency. Splitter blades serve as an effective optimization method for such pumps. This study combines experimental and numerical approaches to investigate the spatiotemporal flow evolution in splitter blade sub-channels, identifying instability mechanisms at the leading edge, midsection, and trailing edge of the blade. Results demonstrate higher flow rates in the pressure side sub-channels compared to the suction side ones. Pressure pulsation is primarily governed by the jet-wake structure and rotor–stator interaction at flow channel outlets. Analysis of liquid flow angle, turbulence kinetic energy, and eddy viscosity distribution establishes correlations between high turbulence areas and the frequent occurrence of phenomena such as vortices and flow separation.
This study investigates the flow characteristics and energy loss mechanisms in large vertical centrifugal pumps through entropy production theory and Q-criterion analysis, focusing on the effects of guide vane wrap angles and blade numbers. Numerical simulations reveal that optimal hydraulic performance occurs at a guide vane configuration of nine blades with a 48° wrap angle. Entropy production analysis demonstrates that turbulent entropy production and wall entropy production are dominant in the pumps, with the turbulent entropy production significantly exceeding the wall entropy production. The wrap angle significantly influences guide vane and volute performance, while showing limited impact on impeller efficiency. Increasing the wrap angle enhances flow control within the guide vane, reducing flow separation, and local turbulent entropy production. Conversely, reducing blade numbers induces flow channel blockage, increasing turbulence intensity in the downstream volute and elevating hydraulic losses in the guide vane, volute, and impeller under partial load conditions. Higher blade numbers improve flow rectification and enhance impeller–volute interaction, albeit at the cost of increased turbulent kinetic energy and frictional losses in the guide vane. These findings provide critical insight into flow-energy loss mechanisms and establish a theoretical foundation for optimizing guide vane structural design in large vertical centrifugal pumps, with potential applications in energy-efficient pump system development.
The hump phenomenon significantly impacts the operational stability of pump turbines, with rotating stall in the diffuser channels being a key unsteady flow structure and a primary cause of hump instability. This study investigates the compressibility effects and rotational behavior of stall cells in the diffuser during hump instability conditions using proper orthogonal decomposition and two-dimensional frequency domain visualization methods. The stall evolution process is analyzed in terms of spatial distribution, intensity, and frequency domain characteristics. The results reveal that the compressibility of the working fluid partially suppresses the transition of rotating stall cells into stable stall cells. Meanwhile, the circumferential propagation of stall cells is identified as the primary contributor to significant hydraulic losses and a critical factor in the hump phenomenon. Consequently, suppressing the rotational behavior of stall cells not only effectively reduces hydraulic losses and mitigates the hump phenomenon, but also expands the unit's safe operating range and enhances its performance under off-design conditions, offering potential strategies for improving pump turbine stability.
30 March 2025 in Chemical Engineering and Processing - Process Intensification