The issue of fretting wear failure of electrical contacts in conductor-parallel groove clamp system might be brought on by breeze vibration. This study discusses the fretting wear behavior of overhead conductor-wire clamp systems in wind-vibration environments and uses energy spectrometry, laser confocal microscopy, and scanning electron microscopy to analyze the wear surfaces and their morphology. The findings indicate an optimal interval for both the electrical contact performance and contact resistance, and that an increase in installation torque leads to a large drop in contact resistance. As serving time increases, the contact interface’s ongoing micromotion degradation will negatively impact the electrical contact performance. The increase in temperature has a significant effect on the micromotion wear.
This study investigates the flow characteristics and energy loss mechanisms in large vertical centrifugal pumps through entropy production theory and Q-criterion analysis, focusing on the effects of guide vane wrap angles and blade numbers. Numerical simulations reveal that optimal hydraulic performance occurs at a guide vane configuration of nine blades with a 48° wrap angle. Entropy production analysis demonstrates that turbulent entropy production and wall entropy production are dominant in the pumps, with the turbulent entropy production significantly exceeding the wall entropy production. The wrap angle significantly influences guide vane and volute performance, while showing limited impact on impeller efficiency. Increasing the wrap angle enhances flow control within the guide vane, reducing flow separation, and local turbulent entropy production. Conversely, reducing blade numbers induces flow channel blockage, increasing turbulence intensity in the downstream volute and elevating hydraulic losses in the guide vane, volute, and impeller under partial load conditions. Higher blade numbers improve flow rectification and enhance impeller–volute interaction, albeit at the cost of increased turbulent kinetic energy and frictional losses in the guide vane. These findings provide critical insight into flow-energy loss mechanisms and establish a theoretical foundation for optimizing guide vane structural design in large vertical centrifugal pumps, with potential applications in energy-efficient pump system development.
18 March 2025 in Journal of the Brazilian Society of Mechanical Sciences and Engineering