In this study, an optimized metal-ferroelectric –semiconductor (MFS) stack containing a La-doped HfO2(HLO) ferroelectric (FE) layer and an N-doped TiO2 (NTO) channel is proposed and used to fabricate highly stable ferroelectric field-effect transistors (FeFETs). HLO and NTO were continuously deposited via atomic layer deposition without breaking the vacuum. Uniform and crystallized FE layers and channels are confirmed in the optimized MFS stack. The fabricated FeFETs exhibit excellent electrical and thermal stability, including a 1.82-V memory window (MW) and high endurance over $10^{{8}}$ cycles with a wide process window above 700°C during rapid thermal annealing. Moreover, ambient stability of oxide semiconductor channel-based FeFETs with 115-mV MW shift after one year of air exposure without a passivation layer was demonstrated for the first time.
In this study, we report the first experimental demonstration of a double-gated ferroelectric field-effect-transistor (DG-FeFET). Based on the TiO2 channel and HfLaO ferroelectric (FE) layers with high thermal stability, we utilized a two-step annealing process to crystallize and minimize defects in the HfLaO–TiO2–HfLaO gate stack of DG-FeFET. The DG-FeFET exhibits low mutual interference between FE layers, achieving an enhanced DG memory window (MW) of 5.1V within ±5V operating voltage and DG endurance over 107 cycles. Additionally, we achieved a data storage density of 5-bits/cell in the DG-FeFETs.
25 November 2025 in IEEE Transactions on Materials for Electron Devices
Al-doped HfO2 (HAO) has demonstrated improved ferroelectric stability; however, its relatively low remnant polarization (2Pr) at reduced annealing temperatures significantly limits practical application. This limitation primarily stems from a low ferroelectric phase fraction and insufficient crystallinity. To address this challenge, we systematically investigated the interplay among processing parameters, ferroelectric phase content, and film crystallinity. Guided by these insights, we optimized HAO films processed at low annealing temperatures by tuning key parameters, including Al doping concentration, oxidant, film thickness, and electrode material. Within an annealing temperature range of 500 °C to 700 °C, the optimized capacitors exhibited markedly enhanced 2Pr values. Notably, a record-high 2Pr of 37.5 μC/cm2 was achieved at 500 °C, representing an 80.3% increase over the previously reported benchmark of 20.8 μC/cm2. These findings underscore the pivotal role of processing-driven control over phase composition and crystallinity in enhancing the ferroelectric performance of HAO films, offering a promising pathway for their integration into next-generation electronic devices.
18 December 2025 in IEEE Transactions on Electron Devices
Ag-based volatile threshold switching (TS) memristors have shown considerable potential in high-density storage and brain-inspired computing due to their simple structure and low-operating voltages. However, the rapid accumulation and random migration of Ag ions during conductive filaments (CFs) formation and rupture degrade memristor endurance and uniformity, limiting their practical applications. In this work, we present an annealing engineering method for modulating the migration of Ag ions within the dielectric layer in Ag-based volatile memristors to improve their performance. Ag/Ti/HfO2/Pt memristors with different Ti thicknesses were fabricated and annealed at $400~^{\circ }$ C for 30 s in a nitrogen atmosphere. The annealed devices exhibit significantly improved uniformity in forming and switching characteristics as well as prolonged endurance compared to nonannealed counterparts. The transmission electron microscopy (TEM) combined with energy-dispersive X-ray spectroscopy (EDS) demonstrates that the annealing process induces the preintroduction of Ag atoms/cluster into the HfO2 dielectric, and suppressing the randomness of CFs formation/rupture as well as the excessive accumulation of Ag ions during cycling. The annealed devices show stable volatile TS behavior with endurance exceeding 109, reduced device-to-device (D2D) variation of approximately 10%, and high selectivity greater than 1011.