28 November 2022 in Structural and Multidisciplinary Optimization
10 March 2023 in IEEE Transactions on Magnetics
Density-based topology optimization methodologies in magnetostatics interpolate either the magnetic permeability μ or the magnetic reluctivity ν to define intermediate materials and compute the problem sensitivities. These choices may lack physical interpretation and are not suited to model realistic permanent magnets. This work proposes the interpolation of the vector magnetic polarization m as a more general alternative, which can model any magnetic material. It is then applied to the multi-material topology optimization of the rotor of a permanent magnet synchronous machine. The case of an ideal permanent magnet with a constant magnetic polarization is compared to that of AlNiCo. The results show that considering the non-linearity of the permanent magnet can significantly impact the optimized geometry.
22 December 2021 in Proceedings in Applied Mathematics and Mechanics
Topology optimization (TO) has been extensively studied in the past decades especially in mechanical engineering. Among different techniques, density‐based methods have become very popular. In electrical engineering, TO has been applied essentially to linear actuators [1] or machines rotors [2] [3], but few works such as [4] deal with the coil repartition within the stator of rotating machines.In this study, we investigate a density‐based topology optimization method, which aims to maximize the average torque of a rotating electrical machine from random or uniform initial material repartition. Material properties such as magnetic permeability or current density are interpolated on densities between each material to obtain a differentiable optimization problem, using SIMP or RAMP [5] for example. A custom magnetostatic finite element solver was implemented on MATLAB®. It takes into account the non‐linearity of magnetic materials with Newton‐Raphson method. The optimization algorithm relies on sensitivities obtained by the adjoint variable method (AVM) [6]. The methodology was performed for two test cases :• optimization of iron/air repartition within the rotor of a synchronous reluctant machine (SRM)• optimization of coils/iron/air repartition within the stator of a one phase permanent magnet synchronous machine (PMSM).In the air/iron case, a filtering technique inspired by ESO [7] is applied: iron which carries few magnetic flux is removed. No filtering was applied in the multi‐material case, but a normalization of the gradient was investigated.As a result, we obtain flux barriers [8] for the optimized SRM rotor, which correspond to industrial designs. However, some convergence issues happened, especially for multi‐material optimization. The gradient normalization helps preventing this phenomenom but leads to surprising asymmetric designs, which need further investigations. It is also necessary to improve the robustness of the method especially for high current density, in order to optimize both the rotor and the stator. Multiphysics considerations will be taken into account in future work.
20 September 2023 in IEEE Transactions on Magnetics
This paper investigates the multi-material topology optimization of the 3-phase stator of an electrical machine. The density-based optimization framework uses a gradient descent on the physical properties of the candidate materials (magnetic polarization and current density). The results indicate that a smoothing procedure is necessary to avoid non-manufacturable designs and promotes a broader exploration of solutions. They also highlight a current angle shifting due to the presence of permanent magnets from the beginning of the optimization. The current angle is therefore added to the optimization variables to address this issue. An efficient optimization procedure that couples both techniques is proposed to improve the performance of the algorithm. The following hybrid method returns symmetrical results that perform better than the asymmetrical structures obtained with the other techniques applied independently, indicating that the asymmetry represents a local optimum.
7 November 2025 in IEEE Transactions on Magnetics
We consider a 2d permanent magnet synchronous machine operating in a sequence of static operating points coming from a drive cycle. We aim to find a rotor design which maximizes the efficiency defined as the quotient of input and output energy considering Joule losses in the stator and eddy current losses in the permanent magnets. A coupled electromagnetic-thermal analysis of the rotor considers the eddy current losses as heat source and adds a temperature constraint to avoid damage of the permanent magnets. Additionally we impose Von-Mises stress constraints to maintain the mechanical integrity of the design. To solve the resulting free form topology optimization problem we use a level set description of the design and the topological derivative as sensitivity information. We show the effect of this constraint at very high speeds which is a trend in recent machine development.
7 November 2025 in IEEE Transactions on Magnetics
This work addresses the topology optimization of a rotor pole of a hybrid-flux machine with gradient methods. The main challenge is handling many different material types (non-linear magnetic steel, air, DC conductors, and magnets with several discrete orientations). Classical gradient-free topology optimization approaches are inefficient due to the high dimensionality of the optimization space, and usual density-based methods fail to provide meaningful results by falling into uninteresting local optima. Therefore, two general and distinct methodologies are proposed: an extended density approach considering hierarchical non-orthogonal as well as simplex interpolation domains, and a level-set method based on the topological derivative. Both methods result in meaningful designs that are analyzed and discussed, and recommendations are formulated.