6 May 2019 in Advanced Functional Materials
20 May 2020 in Journal of Materials Chemistry C
Relaxor ferroelectrics are technologically important materials for applications in, for example, high-temperature capacitors, transducers and nano-positioning systems. These materials have often been reported to exhibit surface or skin layers with distinct physical properties to the bulk. The control of formation and functionality of these skin layers has remained elusive and is becoming increasingly critical due to device miniaturization, where the surface contribution to overall material properties becomes significant. We recently demonstrated that the distinct structural distortion of the skin layer is intimately related to the internal chemical pressure applied by oxygen vacancies and the plane stress conditions at the surface. (S. Kong, N. Kumar, S. Checchia, C. Cazorla and J. Daniels, Adv. Funct. Mater., 2019, 29, 1900344) Here, we demonstrate a unique capability to control the formation and properties of the skin layer through the control of defect concentration. Most interestingly, the skin layer is polar and both electrically and optically active, making it functional and a new candidate for low operating voltage and/or optoelectronic devices. The surface domains in the skin could be altered by applying a small voltage bias (1000 times lower than bulk) or light illumination. A reversible optical change in surface domains provides a new non-contact external control to tune the material polarisation.
2 November 2020 in Applied Physics Letters
A reduction in the orientation distribution of grains, via crystallographic texturing, is known to significantly enhance the electro-mechanical response in polycrystalline piezoelectrics. Through calculations of the electric-field-induced strain in phase-changing ceramics, the local strain heterogeneity was also found to increase with crystallographic texture. The increase in grain-scale strain heterogeneity potentially indicates greater stress concentrations within the polycrystal and may degrade the expected lifetime and fatigue behavior in these ceramics. In crystallographic symmetries with higher numbers of polarization directions, it was found that the magnitude of heterogeneity in the response was lower.
3 January 2022 in Journal of the American Ceramic Society