Junjie Ye

Junjie Ye

Auto-generated profile, based on publicly available information

Junjie Ye

College of Electrical and Information Engineering, Hunan University, Changsha, China

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 November 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
XWXinlong Wu
Xinlong Wu
XYXin Yang
Xin Yang
JYJunjie Ye
Junjie Ye
GLGuoyou Liu
Guoyou Liu
Remaining useful lifetime (RUL) prediction for lift-off of bond wires in IGBT modules is essential to avoid strenuous periodic maintenance and electrical accidents of IGBT-based power converters. However, existing model-driven RUL methods mostly focus on lift-off of the first bond wire and rarely consider on-chip temperature distribution, which result in low prediction accuracy. Herein, a novel prognostic method for bond wire lift-off failure in IGBT considers uneven on-chip temperature distribution during crack propagation at the bond-metallization interface (BMI), which fulfills improved prediction error for RUL. In this method, a wire-bond contact degradation model is built according to the on-chip temperature distribution. The number of power cycles as a function of the crack length and temperature swing of BMI is determined by finite element analysis and power cycling test. In this way, the equivalent resistance reflecting crack propagation at BMI can be accurately estimated, and the degradation curve of the ON-state voltage (Vce_on) can be predicted to yield RUL under the widely-acknowledged failure criteria of bond wire. The effectiveness and generalization of the proposed method are validated by additional tests and show great superiority to the prior-art condition-based RUL prediction methods.

5 July 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
XYXin Yang
Xin Yang
JYJunjie Ye
Junjie Ye
XWXinlong Wu
Xinlong Wu
KHKe Heng
Ke Heng
YHYunze He
Yunze He
GLGuoyou Liu
Guoyou Liu
Lift-off of aluminum bond wires is one of the main failure mechanisms of IGBT modules. Its root cause is the crack propagation, which causes reduction in the contact area of bond wires at the bond-metallization interface. Thus, lifetime prediction based on the classic Paris law is very appealing due to its capability to account for such a failure mechanism. However, Paris law is currently restricted due to its dependency on inaccurate but expensive means to observe the crack rate. In this paper, an analytical calculation method for the crack length of bond wires is proposed by the degradation curves of VCE,on measured during normal power cycling (PC) tests. The dye-and-pry method has been used to measure crack lengths to further validate the proposed analytical calculation method. The proposed analytical calculation method can avoid time-consuming measurement of crack length, and can economically calibrate the key constants c and m of Paris law, which has been employed to predict the lifetime of bond wires of IGBT modules by finite element method. Finally, the calibrated values of c and m make Paris law have better applicability to predict the lifetime of bond wires comparing c and m values reported in existing papers.

28 November 2023 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
JYJunjie Ye
Junjie Ye
XYXin Yang
Xin Yang
XDXingyu Dai
Xingyu Dai
XWXinlong Wu
Xinlong Wu
KHKe Heng
Ke Heng
GLGuoyou Liu
Guoyou Liu
Failure of bond wires has become one of the main failure mechanisms of power modules. Rapid assessment of bond wires becomes increasingly important to satisfy the high-reliability requirements of new module products and shorten their development cycles to market. However, most of preliminary lifetime evaluation methods for bond wires are mainly through time-consuming and expensive power cycling (PC) tests. Herein, a time-efficient lifetime prediction method for bond wires in IGBT modules is proposed to rapidly and economically evaluate the preliminary lifetime. The accurate transient thermo-mechanical FEM simulation is established, which is calibrated by infrared temperature measurement experiments and laser displacement experiments. In this way, the actual strain distribution on bond wires can be yielded and more importantly, the plastic strain and elastic strain of bond wires that cannot be directly measured during normal PC tests can be accurately extracted. Then, four groups of vibration fatigue tests of different geometries of bond wires are meticulously completed for parameterization of the lifetime prediction model based on total strain. Finally, PC tests have been completed to further validate the effectiveness of the newly proposed lifetime prediction method.