10 November 2023 in Science
Mode-locked lasers (MLLs) generate ultrashort pulses with peak powers substantially exceeding their average powers. However, integrated MLLs that drive ultrafast nanophotonic circuits have remained elusive because of their typically low peak powers, lack of controllability, and challenges when integrating with nanophotonic platforms. In this work, we demonstrate an electrically pumped actively MLL in nanophotonic lithium niobate based on its hybrid integration with a III-V semiconductor optical amplifier. Our MLL generates4.8-ps optical pulses around 1065 nm at a repetition rate of ∼10 GHz, with energies exceeding 2.6 pJ and peak powers beyond 0.5 W. The repetition rate and the carrier-envelope offset frequency of the output can be controlled in a wide range by using the driving frequency and the pump current, providing a route for fully stabilized on-chip frequency combs.
9 March 2021 in Light: Science & Applications
Phase-sensitive optical time-domain reflectometry (ΦOTDR) is a well-established technique that provides spatio-temporal measurements of an environmental variable in real time. This unique capability is being leveraged in an ever-increasing number of applications, from energy transportation or civil security to seismology. To date, a wide number of different approaches have been implemented, providing a plethora of options in terms of performance (resolution, acquisition bandwidth, sensitivity or range). However, to achieve high spatial resolutions, detection bandwidths in the GHz range are typically required, substantially increasing the system cost and complexity. Here, we present a novel ΦOTDR approach that allows a customized time expansion of the received optical traces. Hence, the presented technique reaches cm-scale spatial resolutions over 1 km while requiring a remarkably low detection bandwidth in the MHz regime. This approach relies on the use of dual-comb spectrometry to interrogate the fibre and sample the backscattered light. Random phase-spectral coding is applied to the employed combs to maximize the signal-to-noise ratio of the sensing scheme. A comparison of the proposed method with alternative approaches aimed at similar operation features is provided, along with a thorough analysis of the new trade-offs. Our results demonstrate a radically novel high-resolution ΦOTDR scheme, which could promote new applications in metrology, borehole monitoring or aerospace.
16 November 2021 in Journal of Lightwave Technology
Distributed acoustic sensing (DAS) delivers real-time observation ofphysical perturbations such as vibrations or strain variations in conventional optical fibers with high sensitivity. The high density of sensing points and large network footprint provided by a single DAS system, along with the availability of a vast optical fiber network already deployed both in land and in oceanic regions, contrast with the high deployment and maintenance cost of conventional instrumentation networks for seismology. This situation has triggered a rapid growth of DAS deployments for seismic monitoring in recent years. Photonic engineers and geophysicists have joined efforts to prove the value of optical fibers as distributed seismometers, which has resulted in a wide panoply of tests demonstrating diverse applicability across the geosciences. For example, DAS has been successfully applied recording local to teleseismic earthquakes, monitoring glacial icequakes, and observing oceanographic phenomena at the sea floor. Most of the realized tests have been performed using commercially available optical fiber interrogators based on phase-sensitive optical time-domain reflectometry. Among them, DAS based on chirped pulse distributed acoustic sensing have provided optimized performance in terms of both range and sensitivity, particularly at low frequencies. In this communication, we provide a comprehensive review of the current situation of DAS for seismology applications, focusing on near surface monitoring, where already deployed optical fibers can be repurposed as sensor networks.
15 March 2019 in Journal of Lightwave Technology
Advanced optical fiber reflectometry techniques enable spatially distributed measurements of true relative deformations over the length of a conventional optical fiber cable. This methodology is attractive for many applications ranging from intrusion monitoring to seismology. However, accurate quantification of the applied stimulus in general implies sophisticated implementations with poor sensitivity performance. Coherent reflectometry using chirped pulses is an appealing solution, as it provides fast dynamic strain measurements with a simple experimental deployment. Here, we analyze for the first time to our knowledge the lower performance bounds of this technique as a function of the signal-to-noise ratio of the acquired optical signal. We demonstrate that implementations realized so far have been limited by the temporal sampling used instead of the optical signal quality. Through post-processing interpolation approaches, we reach the performance limit for a given set of signal parameters, attaining unprecedented strain sensitivities $(\rm \sim 10^{-12}\varepsilon/\surd Hz)$ for km-length distributed sensors in conventional single-mode fibers.
28 July 2023 in Science Advances
Widely tunable coherent sources are desirable in nanophotonics for a multitude of applications ranging from communications to sensing. The mid-infrared spectral region (wavelengths beyond 2 μm) is particularly important for applications relying on molecular spectroscopy. Among tunable sources, optical parametric oscillators typically offer some of the broadest tuning ranges; however, their implementations in nanophotonics have been limited to narrow tuning ranges in the infrared or to visible wavelengths. Here, we surpass these limits in dispersion-engineered periodically poled lithium niobate nanophotonics and demonstrate ultrawidely tunable optical parametric oscillators. Using 100 ns pulses near 1 μm, we generate output wavelengths tunable from 1.53 μm to 3.25 μm in a single chip with output powers as high as tens of milliwatts. Our results represent the first octave-spanning tunable source in nanophotonics extending into the mid-infrared, which can be useful for numerous integrated photonic applications.