10 April 2023 in Applied Physics Letters
Significant efforts are being put into the development of efficient micrometer-scale light emitting diodes (LEDs) for future display technologies due to their marked benefits over existing displays. To date, however, the efficiency of microLED devices remains significantly lower than that of conventional broad-area devices. The deterioration in device performance with smaller device size has been linked to the plasma damage induced on mesa sidewalls during device fabrication. Here, we studied bottom-up red-emitting nanowire LEDs with different Mg doping levels in the p-GaN layer. The resulting sub-micron LED devices show a distinct improvement in efficiency with increasing Mg dopant incorporation. Through optimization of the doping, we measured an external quantum efficiency of ∼8.3% and a wall-plug efficiency of ∼4.6%, at a current density of ∼1 A/cm2, for a red-emitting sub-micrometer scale LED operating at >630 nm. This study highlights the importance of p-doping in microLEDs for attaining high efficiency performance in nanostructure-based devices.
6 July 2020 in Applied Physics Letters
We report on the demonstration of InGaN photonic nanocrystal light emitting diodes (LEDs), which operate in the green wavelength (∼548 nm). The devices are designed to operate at the Γ point of the photonic band structure and exhibit a spectral linewidth ∼4 nm, which is nearly five to ten times narrower than that of conventional InGaN quantum well LEDs in this wavelength range. Significantly, the device performance, in terms of the emission peak and spectral linewidth, is nearly invariant with injection current, suggesting the insusceptibility to quantum-confined Stark effect commonly seen in InGaN quantum wells. The external quantum efficiency is characterized by a sharp rise with increasing current and reaches a maximum at ∼5 A/cm2, which is comparable to conventional blue quantum well LEDs. A relatively small (∼30%) efficiency droop was measured at an injection current density over 200 A/cm2 at room temperature without any active cooling.
4 October 2021 in Applied Physics Letters
We report on the study of InGaN nanowire green light emitting diodes (LEDs) with lateral dimensions varying from ∼1 to 10 μm. For a device with an areal size ∼3 × 3 μm2, a maximum external quantum efficiency ∼5.5% was directly measured on wafer without any packaging. The efficiency peaks at ∼3.4 A/cm2 and exhibits ∼30% drop at an injection current density ∼28 A/cm2. Detailed analysis further suggests that a maximum external quantum efficiency in the range of 30%–90% can potentially be achieved for InGaN nanowire micro-LEDs by optimizing the light extraction efficiency, reducing point defect formation, and controlling electron overflow. This study offers a viable path for achieving ultrahigh efficiency micro-LEDs operating in the visible.
30 January 2026 in Nature Energy
25 August 2025 in ACS Photonics
28 February 2026 in Light: Science & Applications
InGaN-based micro-light-emitting diodes (micro-LEDs) are emerging to revolutionize the display and lighting technologies, particularly for their excellent robustness, high brightness, high efficiency and small pixel size. Despite the success of blue LEDs, long-wavelength emission, particularly the red emission, has been a challenge for InGaN-based micro-LEDs. Overcoming the low quantum efficiency, color instability, and broad emission in the red wavelength regime are among the most urgent and critical problems that inhibit the commercial implementation of micro-LED technology. In this work, we utilize a nanowire photonic crystal (PhC) structure to reform the radiation behavior of red-emitting InGaN micro-LEDs. Through detailed optimization on the PhC design and device fabrication, we demonstrate red-emitting micro-LEDs with a peak wavelength at 617 nm and a full-width-at-half-maximum (FWHM) of 5 nm, which is about one order of magnitude narrower than previous reported values and is paramount for achieving high color purity. The chromaticity property is highly stable with varying injection currents due to the coupling of emission to photonic band edge mode. A high external quantum efficiency of over 10% was measured from micro-LEDs with a size of 1 µm 2 . This work provides a vital strategy for high-performance red-emitting micro-LEDs and a potential pathway for full-color micro-LED technology by using all III-nitride semiconductors.