23 July 2023 in Journal of Vibration and Control
Abnormal carbody vibrations can significantly affect the safety and stability of high-speed trains. In this study, we conducted field measurements to analyze low-frequency swaying of a high-speed train on the Chinese alpine railway line. The test results reveal that the tail vehicle of the train swayed laterally in certain sections of the track, resulting in vehicle lateral stability index exceeding the limit. The swaying frequency of the carbody was mainly distributed in the range of 1.4–1.5 Hz. The causes of abnormal swaying were analyzed by establishing a computational fluid calculation model. Computational fluid dynamics calculations revealed that lift force, side force, and yaw moment were higher for the tail vehicle compared to the head and middle vehicles. The train-track coupled dynamics simulation results demonstrate that aerodynamics disturbances may be the key factor to intensify the abnormal swaying of the high-speed train tail vehicle.
13 May 2022 in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Out-of-round (OOR) wheel often happens to trains, which can cause abnormal vibration. To develop effective countermeasures to minimize the abnormal vibration, it is necessary to study how the wheel OOR wear affects the vehicle vibration. This paper performs an experimental study on the abnormal vibration characteristics of metro trains with out-of-round wheels. The vibration characteristics is identified by the general survey of wheel roughness from special tests. The statistic wheel wear values of all the vehicles in an operating metro lines are studied to investigate the relationship between the wheel wear and the operating mileage. Several re-profiling strategies are implemented to eliminate the abnormal vibration caused by wheel OOR. The results show that the root cause of the abnormal vibration and deterioration of ride comfort is the car-body flexible resonance excited by the wheel OOR wear. Wheel re-profiling is the most effective measure for reducing the vehicle abnormal vibration. By re-profiling all the wheels of a tested metro vehicle, the ride comfort can be improved by 35% ∼ 40% and the axle-box acceleration can be reduced by 40%.