1 July 2006 in IEEE Transactions on Antennas and Propagation
A Fabry–Perot cavity (FPC) between a ground plane and a partially reflective surface (PRS) is used here to design array antennas with large distance between the radiating elements. This configuration provides some advantages: i) a reduction of the number of array elements to achieve high directivity; ii) large space between contiguous elements that may host a bulky feeding network as required for dual polarization or active antennas; iii) small coupling and easy feeding network designs because of the smaller number of elements with larger inter-element distance. We show that when designing the FPC antenna a frequency shift of the gain maximum may occur, especially in this sparse array configuration. We also show the existence of preferred distances between elements that controls both the directivity and the side lobe level, and how the presence of the FPC and the relaxed requirement of the interelement distance result in a lower interelement coupling. The presented dual polarized antenna comprises two interleaved 2 x 2 arrays placed in a 2-layer FPC, and exhibits a 19 dBi gain and 30 dB of isolation between the two ports over an operating bandwidth of approximately 5.7%, i.e., typical for patch antennas.
6 September 2011 in Optical Materials Express
We report on the possibility of adopting active gain materials (specifically, made of fluorescent dyes) to mitigate the losses in a 3D periodic array of dielectric-core metallic-shell nanospheres. We find the modes with complex wavenumber in the structure, and describe the composite material in terms of homogenized effective permittivity, comparing results from modal analysis and Maxwell Garnett theory. We then design two metamaterials in which the epsilon-near-zero frequency region overlaps with the emission band of the adopted gain media, and we show that metamaterials with effective parameters with low losses are feasible, thanks to the gain materials. Even though fluorescent dyes embedded in the nanoshells’ dielectric cores are employed in this study, the formulation provided is general, and could account for the usage of other active materials, such as semiconductors and quantum dots.
2 June 2014 in IEEE Transactions on Antennas and Propagation
The paper discusses the possibility of generating a pseudo-Bessel beam, with a propagation distance of several hundreds of wavelengths in microwave and millimeter frequency band, by using a radial line slot array (RLSA). A specific application for non-contact microwave detection of buried mines has been considered as test case. The design benefits of a holographic approach to assure the required aperture field distribution and makes use of an ad hoc optimization tool to control the antenna slot layout. The predicted and measured antenna behaviors show that high efficiency and polarization purity can be obtained by such a compact and flat antenna, achieving at the same time both manufacturing and setup simplicity.
22 January 2014 in IEEE Transactions on Antennas and Propagation
We describe the design of a radial line slot array antenna with a shaped and focused near field. The antenna is designed in such a way to control the side lobe level and beamwidth of the normal component of the electric field with respect to the radiating aperture. The design procedure consists of two steps. In the first step, the requirements on the near-field pattern are provided over a focusing plane at a given distance from the radiating aperture. A set theoretic approach is then used to derive the aperture field distribution fitting the requirements over the near field. In the second step, the aperture field distribution is synthesized by accurately placing and sizing the slots of the antenna. The spillover efficiency is maximized during the design process. The antenna is centrally fed by a simple coaxial probe. The antenna design is validated by a prototype and measurements at 12.5 GHz.
17 August 2012 in IEEE Transactions on Antennas and Propagation
In this paper a procedure is presented, allowing the automatic design of circular polarized radial line slot antennas, with either pencil or shaped beam patterns. The antenna slot layout is refined by an optimization scheme based on the physical picture behind the working mechanism of the array. The validity of the approach has been proved by designing very efficient pencil beam antennas, either with maximum directivity or with controlled side lobe levels, and a shaped isoflux beam antenna.
22 July 2014 in Optics Express
The focusing capabilities of an inward cylindrical traveling wave aperture distribution and the non-diffractive behaviour of its radiated field are analyzed. The wave dynamics of the infinite aperture radiated field is clearly unveiled by means of closed form expressions, based on incomplete Hankel functions, and their ray interpretation. The non-diffractive behaviour is also confirmed for finite apertures up to a defined limited range. A radial waveguide made by metallic gratings over a ground plane and fed by a coaxial feed is used to validate numerically the analytical results. The proposed system and accurate analysis of non-diffractive Bessel beams launched by inward waves opens new opportunities for planar, low profile beam generators at microwaves, Terahertz and optics.