27 March 2024 in IEEE Transactions on Microwave Theory and Techniques
In this article, a novel waveguide reconfigurable Schottky diode-based frequency doubler with tunable multiband high efficiency output is proposed and demonstrated. The multiband frequency output is achieved by reconfigurable input waveguide matching and cross-band output circuits matching. In the doubler, the whole cavity is composed of two parts: reconfigurable input matching waveguide cavities and coused main circuit associated with the coused cavity. These reconfigurable cavities are designed to match input impedance for corresponding band. The coused main circuit is adopted by weight optimization to fulfill output match of multiband. Then, the reconfigurable cavity is assembled into doubler through reduced-height waveguide choke flange, which aims to alleviate the assembly interconnection losses. Sample of the frequency doubler, operating at 170, 183, and 220 GHz, has been demonstrated based on this prototype. Measured results indicate that, the peak efficiencies of three bands are 38%, 34.5%, and 22.3%, respectively, with a total tunable operating bandwidth of 50 GHz.
2 September 2024 in IEEE Journal of the Electron Devices Society
The research on high power 190 GHz doubler based on the GaAs Schottky diodes is proposed in this paper. The frequency doubler comprises a improved diode configuration that increases the number of anodes by changing the diode arrangement to improve power handling capacity. Electromagnetic and thermal simulation is utilized to demonstrate that the doubler can carry more power. The input power is gradually pumping from 200 mW to 500 mW with an applied DC bias of -15 V. And the peak efficiency of the doubler is measured to be 17%, while the maximum output power is 85 mW at 190 GHz.
3 February 2025 in IEEE Microwave and Wireless Technology Letters
This letter presents an extremely concise and compact power combining Schottky-based 180-GHz frequency doubler using the Y-junction match. In contrast to the conventional power combining configurations with complex power divider/combiner networks, interconnected waveguides, and single doubler, this work employs a direct matching approach to match the optimal embedded impedance of the diode. The Y-junction applied in this letter provides power dividing/combining, impedance matching, and microstrip (MS) to waveguide transitions in one structure. This structure not only significantly reduces the difficulties associated with waveguide manufacturing but also simplifies the circuit-matching process, thereby minimizing waveguide length loss. A 180-GHz power combining frequency doubler has been demonstrated based on this prototype. The measurement results show that the doubler delivers continuous wave (CW) input power of 500 mW with the output of 76 mW from 168 to 189 GHz. The peak output power is 108 mW at 182 GHz with 500-mW pumped.
3 September 2024 in IEEE Microwave and Wireless Technology Letters
This letter reports a Schottky-based wideband 200–325-GHz terahertz (THz) frequency tripler adopting a waveguide wedge iris (WWI) match instead of a conventional reduced-height waveguide (RHW) match. The wedges in this letter provide the auxiliary impedance matching and in-line cavity configuration in one structure. The auxiliary matching function is derived from the capacity to implement both shunt capacitive iris (CI) and RHW matching of WWI in a simultaneous manner. Due to the merits of design flexibility and structure compactness, a WR-3 band THz monolithic integrated frequency tripler based on the matching waveguide wedges is fabricated and then packaged in an extremely small flange-like cavity. The verified tripler exhibits a conversion efficiency of 2%–6.6% across the bandwidth of 200–325-GHz under 150 mW of pumped power.
16 January 2025 in IEEE Microwave and Wireless Technology Letters
In this letter, a high-efficiency 485–525 GHz frequency balanced tripler using three-port matching technology (TPMT) is reported. In comparison to traditional balanced tripler, the TPMT uses an on-chip capacitor connected to a biased microstrip line (Ms) at the bias port, which not only provides dc and RF isolation but also functions as part of the diode matching. The impedance of bias port participates in the matching process of the diode, effectively reducing the parasitic effect associated with the on-chip capacitance and thereby enhancing the efficiency of the tripler. In addition, this study adopts the on-chip power combining technology to improve the power handling capability of the frequency tripler and minimize the effects of assembly errors. At room temperature, the measured results show that the tripler has an efficiency of 4.2%–13.42% over the 485–525 GHz band at 70–172-mW input power.
24 October 2025 in IEEE Microwave and Wireless Technology Letters
This letter presents a high-isolation terahertz (THz) power combining frequency tripler structure. Each signal path incorporates a balanced tripler topology. The power dividing and combining networks are implemented with $90^{\circ }~3$ -dB directional couplers, providing high interchannel isolation while enabling coherent combination of the third-harmonic signals through quadrature phase characteristics. A 260-GHz power combining frequency tripler has been demonstrated based on this prototype. The measured results demonstrate that the tripler achieves an output power ranging from 10 to 37 mW across the 240–288 GHz band with 500 mW pump power.