7 October 2010 in IEEE Transactions on Microwave Theory and Techniques
This paper proposes a new closed-form expression for computing the power efficiency of delta-sigma (DS) radio frequency (RF) transmitters. Due to the large bandwidth of the pulsewidth modulated (PWM) signal at the output of the DS modulator, the peak efficiency of the power amplifier (PA) when driven by a PWM signal is considerably different than its peak efficiency when the input signal is a continuous sine wave. A weight averaging of the efficiency over the frequency bandwidth of the PWM signal is considered for accurate estimation and prediction of the power efficiency of DS RF transmitters. It is shown that, for a low-pass DS transmitter, the overall average power efficiency of the DS transmitter can be accurately estimated by the product of the modulated peak efficiency of the PA and the coding efficiency of the modulator. For bandpass DS transmitters, an additional parameter that accounts for the duty cycle effect on the efficiency of switching-mode PAs has to be considered. To validate the new proposed expression, a DS transmitter for WiMAX, CDMA and EDGE standards is designed, prototyped and tested. The comparison of the simulated and measured efficiencies of the DS transmitter proves the validity and accuracy of the proposed expression.
1 June 2007 in IEEE/MTT-S International Microwave Symposium
A new approach to accurately model the transistor performance In radio frequency (RF) switching-mode operation is proposed. The purpose of the presented switch-based model is to facilitate and speed up considerably extraction and implementation of large-signal device models for computer added design (CAD). Only a small number of DC and low-frequency small-signal S-parameter measurements are required for the extraction of the complete set of element parameters of the model. Accuracy and efficacy of the nonlinear model in predicting the performance of a single-ended RF power amplifier (PA) is demonstrated by experimental results. For a PA based on a commercial GaN HEMT, measured output power and efficiency match with simulations over a broad frequency range. Moreover, robustness of the developed switch-based model is demonstrated by the design of a voltage-mode class-D PA.
25 May 2014 in Analog Integrated Circuits and Signal Processing
22 December 2016 in IEEE Transactions on Electromagnetic Compatibility
Electrostatic discharge (ESD) gun stress during operation is especially critical if it perturbs the supply system of an integrated circuit (IC). This paper presents a modeling technique of a transfer network (TFN), which stands between the ESD gun and the functional core supply for the first time. The TFN models transients on the IC supply rails. It is built up of elements with physical meaning. Therefore, its parameters allow adaptation to different physical implementations. The TFN includes elements external to the IC and their parasitics as well as the IC package and on chip n- and p-wells. The modeling approach enables to assess ESD gun disturbances at an early design stage of the IC development process and to take preventive measures accordingly.
9 August 2016 in Analog Integrated Circuits and Signal Processing