7 October 2010 in IEEE Transactions on Microwave Theory and Techniques
This paper proposes a new closed-form expression for computing the power efficiency of delta-sigma (DS) radio frequency (RF) transmitters. Due to the large bandwidth of the pulsewidth modulated (PWM) signal at the output of the DS modulator, the peak efficiency of the power amplifier (PA) when driven by a PWM signal is considerably different than its peak efficiency when the input signal is a continuous sine wave. A weight averaging of the efficiency over the frequency bandwidth of the PWM signal is considered for accurate estimation and prediction of the power efficiency of DS RF transmitters. It is shown that, for a low-pass DS transmitter, the overall average power efficiency of the DS transmitter can be accurately estimated by the product of the modulated peak efficiency of the PA and the coding efficiency of the modulator. For bandpass DS transmitters, an additional parameter that accounts for the duty cycle effect on the efficiency of switching-mode PAs has to be considered. To validate the new proposed expression, a DS transmitter for WiMAX, CDMA and EDGE standards is designed, prototyped and tested. The comparison of the simulated and measured efficiencies of the DS transmitter proves the validity and accuracy of the proposed expression.
23 May 2012 in International Journal of RF and Microwave Computer-Aided Engineering
This article presents an analytical method to design a hybrid structure dual-band rat-race coupler at microwave frequencies. The proposed structure uses six identical cells of which each is engineered to work as a quarter wavelength transmission line with proper characteristic impedance at two distinct frequencies having arbitrary frequency ratio. The performances of the π- and T-cells are studied to assess their ability to provide the required electrical parameters for dual-band operation. It is demonstrated that the single-section π-topology can only lead to a suboptimal design for a dual-band rat-race cell at two nonharmonic frequencies. In contrast, the proposed double-section π-cell structure allows achieving an optimal dual-band cell design. A dual-band rat-race coupler designed at 2.14 and 3.6 GHz has been simulated and fabricated in hybrid microstrip technology. Measurement results agree well with analytically based simulation results, which demonstrate the effectiveness of the proposed structure for dual-band operation. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE 22: 690–700, 2012.
6 July 2010 in Journal of End-to-End-testing