Rahul Vishwakarma

Rahul Vishwakarma

Auto-generated profile, based on publicly available information

Rahul Vishwakarma

Department of Electrical Engineering, Indian Institute of Technology, Kanpur, India

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 August 2024 in IEEE Transactions on Electromagnetic Compatibility
Verified
Journal Article
Closed access
JYJyoti Yadav
Jyoti Yadav
RVRahul Vishwakarma
Rahul Vishwakarma
MSMondeep Saikia
Mondeep Saikia
KSKumar Vaibhav Srivastava
Kumar Vaibhav Srivastava
Janakarajan RamkumarJanakarajan Ramkumar
Janakarajan Ramkumar
A dielectric resonator-based ultrabroadband microwave absorber is proposed. The first and second iterations of the Minkowski fractal are exploited to design the final unit cell geometry. The final prototype is an all-dielectric microwave absorber and is fabricated using 3-D printing technology. Conventional microwave absorbers are usually made up of metal, dielectric, resistive, or active components, while the proposed absorber is fabricated using just dielectric material, hence the name all-dielectric. This all-dielectric absorber offers absorption from 2.54–40 GHz at normal incidence. For TE mode, absorption is stable up to 40 $^{\circ }$ and up to 60 $^{\circ }$ for TM mode. The ultrawide band with its −10 dB fractional bandwidth up to 176 $\%$ is achieved using single technology and one-step fabrication. Measurement results are in good agreement with simulation. The presented work opens new dimensions to explore all-dielectric mechanically robust microwave absorbers. Therefore, it is suitable for use in harsh environments without any post-processing treatment.

2 August 2024 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
KMKps Maan
Kps Maan
RVRahul Vishwakarma
Rahul Vishwakarma
MSMondeep Saikia
Mondeep Saikia
KSKumar Vaibhav Srivastava
Kumar Vaibhav Srivastava
In this paper, the time modulation utilizing switchable frequency selective surfaces (FSS) for a broad range of frequencies has been designed and experimentally demonstrated. The unit cell of the FSS comprises three layers, with the middle layer exhibiting switchable behaviour with the help of the PIN diode. The incident electromagnetic (EM) wave undergoes time modulation through the use of a time-varying reflection coefficient. This is achieved by periodically altering the reflection state of the switchable FSS structure. The timemodulated complex-valued reflection coefficient can effectively produce the harmonics with reduced power of incident frequency component and enhance sideband harmonics. The thickness of the proposed prototype is 0.1λL with a periodicity of 0.13λL where λL corresponds to the lowest frequency. The measured spectrum of reflected EM wave constituent at fin achieved ranges between -5 and -18 dB in the broad frequency range from 4.6 to 7.8 GHz. This is the first experimental demonstration in C band. The proposed prototype have lower periodicity with wide fractional bandwidth and polarization insensitivity structure. With Doppler like frequency shift in reflected wave, the structure can effectively disrupt the Doppler radar's ability to detect and track targets

21 October 2024 in IEEE Microwave and Wireless Technology Letters
Verified
Journal Article
Closed access
RVRahul Vishwakarma
Rahul Vishwakarma
AAAakash
Aakash
JYJyoti Yadav
Jyoti Yadav
AVAmit Verma
Amit Verma
KSKumar Vaibhav Srivastava
Kumar Vaibhav Srivastava
This letter presents the methodology behind the design and development of a device that disobeys Foster’s reactance theorem and operates as a negative inductor in the microwave range. An operational amplifier (op-amp)-based negative impedance converter (NIC) is used to design a negative inductor (nonfoster element). The design concept is quantitatively analyzed, simulated, and experimentally verified. A co-simulation technique and some basic principles are presented to make it easier to build and optimize the negative inductor circuit. The simulation results show that the input admittance is negative from 1 to 4 GHz. The method of fabrication used is a hybrid microwave integrated circuit (HMIC). The methodology is verified by the measurement of a prototype whose size is 20 $\times$ 20 mm (0.006 $\uplambda_{0}$ $\times$ 0.066 $\uplambda_{0}$ ) with a thickness of $h$ = 1.6 mm (0.0053 $\uplambda _{0}$ ), where $\uplambda _{0}$ is the free-space wavelength at 1 GHz. Good agreement between experimental data and theoretical predictions is observed for 1–4 GHz, proving the validity of the provided method. The proposed prototype can eliminate reactance in impedance matching while designing broadband RF antennas and absorbers. This is the first work which demonstrates the realization of negative inductor in using HMIC technology.

1 January 2026 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
BBBaisakhi Bandyopadhyay
Baisakhi Bandyopadhyay
RVRahul Vishwakarma
Rahul Vishwakarma
MSMondeep Saikia
Mondeep Saikia
KSKumar Vaibhav Srivastava
Kumar Vaibhav Srivastava
This manuscript presents a polarization-insensitive wideband time-modulated Frequency Selective Surface (FSS) for radar countermeasure applications in microwave antennas. The study investigates the out-of-band performance of the FSS relative to the operating frequency of a microstrip antenna. The proposed FSS operates in the L-band and part of the S-band, covering 0.8 GHz to 2.4 GHz with a 100% fractional bandwidth. The integrated antenna array is designed to function in the X-band at 8 GHz. Airborne antennas typically operate in the X-band, while ground-based detection systems commonly use the L and S bands to detect distant objects. To ensure operational security, the airborne antenna must remain concealed from enemy ground-based radar systems, without compromising its communication and functionality. This work presents the first experimental demonstration of a wideband time-modulated FSS operating in the L and S bands, designed to conceal a functioning X-band communication antenna. Initially, the wideband FSS is designed, followed by its integration with the antenna array to validate its performance. The structure is fabricated and experimentally tested, with measured results closely matching simulations. While the time-modulated FSS can completely cover the metallic body of an aircraft, the onboard communication antenna remains exposed to electromagnetic waves, which can provide precise information to adversary Doppler radar. To overcome this, the time-modulated FSS unit cell is designed with a transmissive top layer, ensuring seamless communication with the ground station while suppressing interference from out-of-band electromagnetic waves.

13 March 2026 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
AMAbhishek Mishra
Abhishek Mishra
RVRahul Vishwakarma
Rahul Vishwakarma
KSKumar Vaibhav Srivastava
Kumar Vaibhav Srivastava
YCYogesh Singh Chauhan
Yogesh Singh Chauhan
AVAmit Verma
Amit Verma
Vanadium dioxide (VO 2 ) is a phase change material that manifests as a reversible insulator-to-metal transition (IMT). Significant changes in the electrical and optical properties of VO 2 during the phase transition have prompted substantial interest in switchable and reconfigurable microwave devices. Since reflection/transmission of electromagnetic waves through a VO 2 film can be controlled by modulating its electrical properties thermally, it can potentially be used to regulate the RF signal propagation path by modulating the effective substrate thickness. As a proof of concept, we design and experimentally demonstrate a Salisbury screen-based reconfigurable absorber using a uniform VO 2 film-based substrate thickness modulator. The proposed absorber operates partially in the C and X-bands (5.4–9.3 GHz) with the secondary absorption band at 19.83–23.5 GHz in the insulating state of VO 2 . In the metallic state, the operating band shifts to 11.89–20.15 GHz (Ku- and partially K-bands). The absorber also shows a wide range of reflection magnitude tuning in the operating band due to the change in the electrical properties of VO 2 during IMT. We also present a transmission line-based equivalent circuit model to validate the measurement results and to understand the temperature-dependent performance of the absorber. Uniform VO 2 film-based thermally actuated substrate thickness modulator offers a low-cost and easier integration method for system miniaturization by enabling multi-band functionality.

20 August 2025 in Microwave and Optical Technology Letters
Verified
Journal Article
Closed access
KMK. P. S. Maan
K. P. S. Maan
RVRahul Vishwakarma
Rahul Vishwakarma
KSKumar Vaibhav Srivastava
Kumar Vaibhav Srivastava