3 July 2018 in IETE Journal of Education
Two important mathematical tools, namely, vector calculus and differential equations dominate the domain of computational electromagnetics. These two tools, though powerful, are not always needed for practical modelling of electromagnetic problems. In this paper, we are presenting an alternative approach using algebraic topology. We discuss some of the important advantages of this approach over other mainstream methods and highlight opportunities and directions for future research.
28 November 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
A wideband, low-profile endfire antenna with polarization reconfiguration is proposed. The endfire antenna can be electronically switched among the left-hand circular polarization (LHCP), right-hand circular polarization (RHCP), and linear polarization (LP) using six PIN diodes in conjunction with biasing lines. The proposed antenna consists of a wideband half-mode substrate integrated waveguide (HMSIW) cavity (vertically polarized magnetic dipole) and tapered switchable electric dipole (horizontally polarized) with a feed line. The impedance bandwidth of the HMSIW cavity is increased by combining the resonance frequencies of quasi-TE1,0.5,0 mode with quasi-TE3,0.5,0 mode by placing the two slotted pairs at the null of quasi-TE3,0.5,0 mode. At LHCP/RHCP states, the proposed endfire antenna exhibited a stacked 10-dB impedance bandwidth (IBW) of 11.66% (6.54-7.35 GHz) and a 3-dB axial ratio bandwidth (ARBW) of 11.23% (6.515-7.29 GHz) with a peak gain of approximately 4.20 dBic. When switched to the LP state, it shows a 10-dB impedance bandwidth of 11.58% (6.87-7.715 GHz) with a peak gain of 5.35 dBi. Therefore, it can exhibit good effective bandwidths (stacked 10-dB IBW and 3-dB ARBW) of 5.93% (6.87-7.29 GHz) and 10.84% (6.54-7.29 GHz) across the three polarization states (LP/RHCP/LHCP) and two CP states (RHCP/LHCP), respectively.
21 October 2024 in IEEE Microwave and Wireless Technology Letters
This letter presents the methodology behind the design and development of a device that disobeys Foster’s reactance theorem and operates as a negative inductor in the microwave range. An operational amplifier (op-amp)-based negative impedance converter (NIC) is used to design a negative inductor (nonfoster element). The design concept is quantitatively analyzed, simulated, and experimentally verified. A co-simulation technique and some basic principles are presented to make it easier to build and optimize the negative inductor circuit. The simulation results show that the input admittance is negative from 1 to 4 GHz. The method of fabrication used is a hybrid microwave integrated circuit (HMIC). The methodology is verified by the measurement of a prototype whose size is 20 $\times$ 20 mm (0.006 $\uplambda_{0}$ $\times$ 0.066 $\uplambda_{0}$ ) with a thickness of $h$ = 1.6 mm (0.0053 $\uplambda _{0}$ ), where $\uplambda _{0}$ is the free-space wavelength at 1 GHz. Good agreement between experimental data and theoretical predictions is observed for 1–4 GHz, proving the validity of the provided method. The proposed prototype can eliminate reactance in impedance matching while designing broadband RF antennas and absorbers. This is the first work which demonstrates the realization of negative inductor in using HMIC technology.
5 May 2024 in Microwave and Optical Technology Letters
KSKumar Vaibhav Srivastava
1 January 2026 in IEEE Antennas and Wireless Propagation Letters
12 August 2026 in Microwave and Optical Technology Letters
KSKumar Vaibhav Srivastava