This work presents the development of a novel chalcogenisation process for the fabrication of Cu2ZnSn(S,Se)4 (CZTSSe or kesterite) based solar cells that enables generating sharp graded anionic compositional profiles with high S content at the top and low S content at the bottom. This is achieved though the optimization of the annealing parameters including the study of several sulphur sources with different predicted reactivity (elemental S, thiourea, SnS and SeS2). As a result, depending on the sulphur source employed, devices with superficially localized maximum sulphur content between 50-20 % within the charge depletion zone, and between 10-30 % towards the bulk material are obtained. This complex graded structure is confirmed and characterized by combining multi-wavelength depth-resolved Raman spectroscopy measurements together with in-depth Auger Electron Spectroscopy (AES) and X-Ray Fluorescence (XRF). In addition, the devices fabricated with such graded-band gap absorbers are shown to be fully functional with conversion efficiencies around 9 % and with improved VOC deficit values that correlate with the presence of a gradient. These results represent one step forward towards anionic band gap grading in kesterite solar cells.
Accurate anionic control during the formation of chalcogenide solid solutions is fundamental for tuning the physicochemical properties of this class of materials. Compositional grading is the key aspect of band gap engineering and is especially valuable at the device interfaces for an optimum band alignment, for controlling interface defects and recombination and for optimizing the formation of carrier-selective contacts. However, a simple and reliable technique that allows standardizing anionic compositional profiles is currently missing for kesterites and the feasibility of achieving a compositional gradient remains a challenging task. This work aims at addressing these issues by a simple and innovative technique. It basically consists of first preparing a pure sulfide absorber with a specific thickness followed by the synthesis of a pure selenide part of complementary thickness on top of it. Specifically, the technique is applied to the synthesis of Cu2ZnSn(S,Se)4 and Cu2ZnGe(S,Se)4 kesterite absorbers, and a series of characterizations are performed to understand the anionic redistribution within the absorbers. For identical processing conditions, different Se incorporation dynamics is identified for Sn- and Ge-based kesterites, leading to a homogeneous or graded composition in depth. It is first demonstrated that for Sn-based kesterite the anionic composition can be perfectly controlled through the thicknesses ratio of the sulfide and selenide absorber parts. Then, it is demonstrated that for Ge-based kesterite an anionic (Se–S) gradient is obtained and that by adjusting the processing conditions the composition at the back side can be finely tuned. This technique represents an innovative approach that will help to improve the compositional reproducibility and determine a band gap grading strategy pathway for kesterites. Furthermore, due to its simplicity and reliability, the proposed methodology could be extended to other chalcogenide materials.
An unusual solid–liquid–vapor extended growth mechanism is reported in the synthesis reaction of Cu2ZnGeSe4 absorbers through a specific break-off experiment.
Herein, a detailed study of the stability of different ITO‐based back‐contact configurations (including bare ITO contacts and contacts functionalized with nanometric Mo, MoSe2, and MoS2layers) under the coevaporation processes developed for the synthesis of high‐efficiency Cu(In,Ga)Se2(CIGSe) solar cells is reported. The results show that bare ITO layers can be used as efficient back contacts for coevaporation process temperatures of 480 ºC. However, higher temperatures produce an amorphous In–Se phase at the ITO surface that reduces the contacts transparency in the visible region. This is accompanied by degradation of the solar cells’ efficiency. Inclusion of a Mo functional layer leads to the formation of a MoSe2interfacial phase during the coevaporation process, which improves the cells’ efficiency, achieving device efficiencies similar to those obtained with reference solar cells fabricated with standard Mo back contacts. Optimization of the initial Mo layer thickness improves the contact transparency, achieving contacts with an optical transparency of 50% in the visible region. This is accompanied by a relevant decrease in back reflectivity in the CIGSe devices, confirming the potential of these contact configurations for the development of semitransparent CIGSe devices with improved optical aesthetic quality without compromising the device performance.
18 November 2020 in Progress in Photovoltaics: Research and Applications