Ning Cui

Ning Cui

Auto-generated profile, based on publicly available information

Ning Cui

Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing, China

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 May 2021 in IEEE Geoscience and Remote Sensing Letters
Verified
Journal Article
Closed access
NCNing Cui
Ning Cui
KDKeqing Duan
Keqing Duan
KXKun Xing
Kun Xing
ZYZhongjun Yu
Zhongjun Yu
The space–time adaptive processing (STAP) technique has achieved good clutter suppression performance for a side-looking airborne radar; however, it suffers from severe performance degradation in nonside-looking airborne radar. This is because the clutter distribution varies considerably with range. The 3D STAP can provide better performance compared with the traditional STAP methods in such a nonstationary clutter environment, but it requires high computational complexity and sample support. In this letter, the characteristic of azimuth–elevation–Doppler 3-D beam pattern for the planar array is explored, and a novel reduced-dimension scheme combined with this characteristic is proposed. We further developed three basic reduced-dimension structures according to this scheme. Furthermore, we also prove that the first and third structures are just the direct extension of the traditional 2-D generalized multibeam and joint-domain localized methods. The second one is an original structure that performs local reduced-dimension processing with three orthogonal planar windows. Numerical results verify that the proposed structures have significant advantages in reducing computational load and training sample numbers compared with existing 3D STAP methods. In particular, the second structure shows the best comprehensive performance in the bad samples environment.

19 July 2022 in IEEE Transactions on Aerospace and Electronic Systems
Verified
Journal Article
Closed access
NCNing Cui
Ning Cui
KXKun Xing
Kun Xing
ZYZhongjun Yu
Zhongjun Yu
KDKeqing Duan
Keqing Duan
Sparse recovery space-time adaptive processing (SR-STAP) can achieve an ideal clutter suppression with very few training samples, however, its application faces two challenges: (i) severe gird mismatch effect; (ii) large time-resources requirement. In practice, a coarse space-time grids will bring a serious mismatch between the true clutter points and the divided grids, which leads to a significant performance degradation of clutter suppression. Although the high-resolution mesh can effectively reduce the grid mismatch effect, its cost is huge computational load. Thus, it is meaningful to reduce the large-scale dictionary operation complexity while maintaining suboptimal clutter suppression performance for SR-STAP when applying in real airborne radar system. This paper proposed a tensor-based SR-STAP scheme aims at large-scale dictionary application. In the proposed framework, traditional vector-based operations are replaced by their corresponding low-complexity tensor representation. As a result, a large-scale matrix operation can be degraded into multiple small-scale matrix calculation, thus the huge computational loading can be saved in recovery. A comparison of tensor-based SR-STAP and traditional vector-based SR-STAP in large-scale dictionary application is also exhaustive discussed here. Based on this framework, a tensor-based sparse Bayesian learning and its fast matrix-realization form are developed. A series of carefully designed numerical simulation and measurement experiments indicate that the significant advantages of the tensor-based SR-STAP whether in performance or computation loading.

28 August 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
DHDing He
Ding He
NCNing Cui
Ning Cui
JFJingxin Fan
Jingxin Fan
Zhongjun YuZhongjun Yu
Zhongjun Yu
A multiple feedback-based technique is presented to improve broadband simultaneous noise and impedance matching (BSNIM) performance in a GaAs low-noise amplifier (LNA). It consists of dual reactive feedback for the first stage and frequencydependent feedback loops (FDFLs) for the succeeding stages. Compared to existing BSNIM technologies, the proposed method completes the theoretical derivation of the required load and can provide flexible solutions, which effectively increases the optimization opportunity. Besides, in order to achieve the required load, a structure composed of low-Q high order LC-ladder networks and FDFLs are introduced, which greatly reduce the difficulty of impedance conversion. The detailed strategies for BSNIM are also given. To verify feasibility, a 6-14 GHz three-stage common-source LNA has been fabricated via 0.15-μm GaAs pHEMT process, with a measured gain of 26.8 ± 0.75 dB, a minimum noise of 1.21 dB, and S11 of less than -15 dB throughout the entire operating band.

16 July 2021 in IET Radar, Sonar & Navigation
Verified
Journal Article
Open access
PDF file
NCNing Cui
Ning Cui
KXKun Xing
Kun Xing
KDKeqing Duan
Keqing Duan
Zhongjun YuZhongjun Yu
Zhongjun Yu
The phased‐array multiple‐input multiple‐output (PA‐MIMO) airborne radar faces more severe sample shortage problem than the conventional PA radar. Hence, it suffers from severe performance degradation when it adopts the traditional space‐time adaptive processing (STAP) methods. Fortunately, the introduction of sparse recovery (SR) brings a novel perspective to reducing the sample requirement. However, most existing SR‐STAP methods only consider the clutter sparsity as prior information. In fact, more useful information, such as radar parameters, ground environment, airplane state, can all be obtained in advance and further utilised to improve the performance of SR‐STAP. In this study, the clutter structure, obtained based on the abovementioned prior knowledge, is utilised in the block SR‐STAP in the PA‐MIMO airborne radar. The clutter suppression performance is poor when the block SR algorithm is directly applied into the STAP because the clutter structure is destroyed by common vectorisation operation. To solve this problem, the vectorisation operation is first redesigned based on the clutter distribution characteristics and a novel dictionary is constructed. A basic block sparse Bayesian learning STAP scheme is then proposed in the PA‐MIMO radar’s application. The numerical experiments illustrate that the proposed method can achieve satisfactory performance with a few training samples and outperforms the state‐of‐the‐art SR‐STAP methods.

8 May 2023 in IEEE Transactions on Aerospace and Electronic Systems
Verified
Journal Article
Open access
NCNing Cui
Ning Cui
KXKun Xing
Kun Xing
Zhongjun YuZhongjun Yu
Zhongjun Yu
KDKeqing Duan
Keqing Duan
For multichannel airborne radars, wide-area ground-moving target indication (WGMTI) processing can quickly obtain the dynamic distribution of moving targets in a wide area, which holds considerable significance in many fields. Nevertheless, the WGMTI mode suffers from the interference of powerful ground clutter, which frequently submerges slow-moving targets and causes many false alarms in subsequent moving target detection. Space–time adaptive processing (STAP) can successfully suppress clutter, but its performance depends critically on the available training samples. Consequently, an effective STAP method characterized by fast processing and a small sample size for WGMTI application in multichannel airborne radars must be developed. In this paper, a subarray-level sparse recovery STAP (SR-STAP) processing framework is proposed for multichannel airborne radars. First, the characteristics of the subarray-level received clutter are discussed in detail. Second, on the basis of this analysis, we further designed a joint space–time dictionary and developed a separable tensor-based sparse Bayesian learning (STSBL) method. In this method, two-stage decomposition is proposed to ensure that large-scale data can be degraded into small-scale data in processing, which significantly improves computation efficiency. Finally, the effectiveness of the proposed STSBL-STAP method in WGMTI processing was verified using real measurement data obtained from a developed dual-channel Ku-band airborne radar.

22 May 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
DHDing He
Ding He
MYMinyuan Yu
Minyuan Yu
NCNing Cui
Ning Cui
CTCheng Tan
Cheng Tan
Zhongjun YuZhongjun Yu
Zhongjun Yu
In this brief, a novel reduced-size 1800 hybrid is presented to implement a U-band subharmonic mixer (SHM) via a 0.15-μm GaAs pHEMT process. The isolations between Σ-port and -port of the proposed 1800 hybrid are significantly enhanced by two structures: one is a compact multiconductor edge-coupled line balun with artificial transmission line and the other is an in-phase power divider composed of λLO/4 coupled line. As a proof-of-principle demonstration, a single balanced SHM with an antiparallel diode pair configuration is designed and fabricated, which exhibits a conversion gain of -12.25 dB 1 1.55 dB within the operating RF frequency of 40 to 60 GHz under 14 dBm LO pumping power. The improved isolations of LO-to-RF and 2LO-to-RF are 33 to 47 dB and 44 to 57 dB, respectively. The measured results surpass previously reported performance of SHMs.