With the rapid advancement in millimeter-wave antennas, heat dissipation of array heat sources faces significant challenges due to increasing requirements on power density and miniaturization. Efficient thermal management is essential to ensure reliability and performance, particularly in high-power applications such as millimeter-wave antennas. This study investigates liquid-cooled heat sinks featuring an inlet and outlet on the same side. A topology optimization method is employed to design an efficient heat sink, minimizing both average temperature and fluid dissipation. The optimized design is compared with common liquid-cooled heat sinks, including series, parallel, pin rib, and tree channels, through experimental and numerical simulations. A dedicated liquid-cooled experimental platform is developed to evaluate thermal and fluid characteristics under different flow rates. The results demonstrate that the topology optimization channels achieve superior thermal uniformity and lower pressure drop compared to traditional designs. The average temperatures of the heat sources in topology optimization I and II channels are 6% and 4% lower than those in the other flow channels, respectively, and the topology optimization I channel exhibits the most favorable fluid characteristics, with a pressure drop 9% lower than that of the parallel flow channel. Specifically, the topology optimization I and II channels exhibit balanced heat dissipation and flow resistance, while the series channel suffers from excessive pressure losses. The findings provide valuable insights for optimization, offering a practical method for enhancing thermal management in millimeter-wave antenna applications.
22 May 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
In this brief, a novel reduced-size 1800 hybrid is presented to implement a U-band subharmonic mixer (SHM) via a 0.15-μm GaAs pHEMT process. The isolations between Σ-port and -port of the proposed 1800 hybrid are significantly enhanced by two structures: one is a compact multiconductor edge-coupled line balun with artificial transmission line and the other is an in-phase power divider composed of λLO/4 coupled line. As a proof-of-principle demonstration, a single balanced SHM with an antiparallel diode pair configuration is designed and fabricated, which exhibits a conversion gain of -12.25 dB 1 1.55 dB within the operating RF frequency of 40 to 60 GHz under 14 dBm LO pumping power. The improved isolations of LO-to-RF and 2LO-to-RF are 33 to 47 dB and 44 to 57 dB, respectively. The measured results surpass previously reported performance of SHMs.
In a beamforming circuit for a modern broadband phased-array system, high accuracy and compactness have received sufficient attention as they are directly related to side lobe level and fabrication cost, respectively. In order to meet the low phase error required, this paper proposed an ultra-broadband 6-bit digital step switched-type attenuator (STA) with capacitive/inductive compensation networks. Compared to the conventional methods, the proposed technique employs an improved simplified T-structure with capacitive compensation networks, which simultaneously achieves low insertion loss and high-accuracy amplitude/phase control. In addition, on-chip level shifting circuit is integrated to avoid complex control schemes. The strategy of prioritizing return loss is adopted to alleviate the performance degradation caused by impedance mismatch after cascade. As a proof-of-principle demonstration, a wideband 6-bit STA with core area of only 0.5 mm × 1.8 mm was designed via 0.15-micrometer GaAs pHEMT technology. It exhibits ultra-broadband operation with a 31.5 dB amplitude tuning range and a 0.5 dB tuning step. The insertion loss of the reference state is 4–5.3 dB. The return loss is better than 15 dB for all the 64 states. The RMS amplitude and phase errors are less than 0.2 dB and 2° over the 10 to 20 GHz.
This paper proposes a C/X/Ku/K band 6-bit digital step attenuator (DSA) which employs a variety of improved attenuation cells to achieve a wide bandwidth, stable amplitude variation, stable phase variation, and small area. In this paper, the improved T-type, π-type, and switched-path type topologies are analyzed theoretically and applied to different attenuation values to achieve the optimal attenuator performance. In addition, in order to reduce the complexity and to improve the stability of the overall radar system, the logic control circuit is integrated in the DSA chip in this paper. Finally, the proposed attenuator is implemented in 0.15μm GaAs technology, which has a maximum attenuation range of 31.5 dB with 0.5 dB steps. The proposed DSA exhibits a root-mean-square (RMS) attenuation error of less than 0.15 dB and an RMS phase error of less than 3°, at 4–24 GHz. The insertion loss (IL) and the area of the DSA are 4.3–4.5 dB and 1.5 mm × 0.4 mm, respectively. Benefiting from the improvements of the attenuation cells and the characteristic of GaAs technology with strong resistance to radiation and power processing capability, the proposed DSA is suitable for spaceborne radar systems.
This paper proposes a novel 8–18 GHz 90° switched T-type phase shifter (TPS). In contrast to the conventional TPS, the proposed TPS adds a compensation capacitance to greatly enhance the phase shifting capacity. Moreover, the designed structure also integrates a filtering compensation network, which can effectively achieve a flat relative phase shift in a wide band. The proposed 90° TPS is fabricated using 0.15 μm GaAs pHEMT technology. The TPS achieves homogeneous phase shift at 8–18 GHz, with the measured phase error of less than ±1.5°. The insertion loss of the proposed phase shifter is 1.3–2.6 dB, and the chip size is merely 0.53 × 0.86 mm2. Thanks to these excellent performance characteristics, the designed phase shifter is well-suited for ultra-wideband wireless communication and radar systems.
Generalized broadband operation facilitates multifunction or multiband highly integrated applications, such as modern transceiver systems, where ultra-wideband bidirectional passive mixers are favored to avoid a complex up/down-conversion scheme. In this paper, a modified Ruthroff-type transmission line transformer (TLT) balun is presented to enhance the isolation of the mixer from the local oscillator (LO) to the radio frequency (RF). Compared to the conventional methods, the proposed Ruthroff-type architecture adopts a combination of shunt capacitors and parallel coupled lines to improve the return loss at the LO port, thus effectively avoiding the area consumption for the diode-to-balun impedance transformation while simultaneously providing a suitable point for IF extraction. In addition, a parallel compensation technique consisting of an inductor and resistor is applied to the RF balun to significantly improve the amplitude/phase balance performance over a wide bandwidth. Benefiting from the aforementioned operations, an isolation-enhanced 8–30 GHz passive double-balanced mixer is designed as a proof-of-principle demonstration via 0.15-micrometer GaAs p-HEMT technology. It exhibits ultra-broadband performance with 7 dB average conversion loss and 50 dB LO-to-RF isolation under 15 dBm LO power. The monolithic microwave integrated circuit area is 0.96 × 1.68 mm2 including all pads.