This paper is concerned with elastic wave propagation and vibration band gaps in periodic beams formed by alternating combinations of various materials with the same geometric parameters. Such composite periodic systems have the similar feature of filtering characteristics of periodic beams. The study is performed by using an exact analytical approach based on a combination of the traveling wave analysis method and periodic structure theory. Based on the wave theory, a general mathematical model of composite periodic beam with uniform cross-section is established, the band gaps mechanism and vibration characteristics of this model are discussed, and the analytical solutions of the dynamic model and the explicit expression of band gaps are derived. Based on these equations, an explicit expression is provided for the calculation of intermediate frequency boundary frequency, all the band gaps information can be obtained in an exact and simple manner, and several illustrative examples are also provided.
7 July 2025 in Mechanical Systems and Signal Processing
The surface damage mechanics of WC/Co is investigated by the indentation and the diamond scratch method, where the material removal mechanism and the surface integrity are evaluated, including the plastic deformation, the formation and propagation of the cracks and the grains dislodgement. The results showed that the plastic deformation of WC/Co is dependent on the loading speed and the indentation positions where the indented percentage of WC grain area differs, and the Vickers indentation test also indicates that the radial cracks always originate at the phase boundaries of WC and Co, and the propagation of the generated cracks direct along the sharp wedges of the diamond indenter, which finally terminate at the phase boundaries. Typically, the material removal mechanism contains three varied modes, that is, ductile material removal, groove sides fracture and WC grain dislodgements. In addition, the oxidation of WC/Co is studied by energy dispersive spectroscopy (EDS) and Raman spectroscopy, and the oxidation products are identified.
This paper investigates the vibration bandgap properties of two-dimensional (2D) periodic composite beam frame structures with component defects. Combined with the topological characteristics of the structure, a generalized position coordinate system is proposed, and an assembly method of the stiffness matrix for the virtual full component model is presented. Then the spectral equations of motion of the whole 2D periodic composite beam frame structures and the ones with component defects are established. Compared with the frequency-domain solutions calculated using the finite element method, the accuracy and the feasibility of the spectral element method (SEM) solutions are verified. It can be shown that the SEM is suitable for analyzing the vibration bandgap properties, and the influence of different component defects and their combination on the bandgap characteristics of 2D periodic frame structures is studied. The results show that forbidden gap splitting will occur in the main bandgap of the structure, but the degree of influence varies. The results also show that the influence of component defects on unsymmetrical or irregular positions of the vibration bandgaps of periodic frame structures is greater than the one in symmetrical or regular positions.