5 March 2021 in IEEE Internet of Things Journal
Terahertz (THz) communication has been regarded as one promising technology to enhance the transmission capacity of future Internet-of-Things (IoT) users due to its ultrawide bandwidth. Nonetheless, one major obstacle that prevents the actual deployment of THz lies in its inherent huge attenuation. Intelligent reflecting surface (IRS) and multiple-input-multiple-output (MIMO) represent two effective solutions for compensating the large path loss in THz systems. In this article, we consider an IRS-aided multiuser THz MIMO system with orthogonal frequency-division multiple (OFDM) access, where the sparse radio frequency chain antenna structure is adopted for reducing the power consumption. The objective is to maximize the weighted sum rate via jointly optimizing the hybrid analog/digital beamforming at the base station (BS) and reflection matrix at the IRS. Since the analog beamforming and reflection matrix need to cater all users and subcarriers, it is difficult to directly solve the formulated problem, and thus, an alternatively iterative optimization algorithm is proposed. Specifically, the analog beamforming is designed by solving a MIMO capacity maximization problem, while the digital beamforming and reflection matrix optimization are both tackled using semidefinite relaxation (SDR) technique. Considering that obtaining perfect channel state information (CSI) is a challenging task in IRS-based systems, we further explore the case with the imperfect CSI for the channels from the IRS to users. Under this setup, we propose a robust beamforming and reflection matrix design scheme for the originally formulated nonconvex optimization problem. Finally, simulation results are presented to demonstrate the effectiveness of the proposed algorithms.
11 October 2021 in IEEE Transactions on Wireless Communications
This paper proposes a new transmission policy for intelligent reflecting surface (IRS) empowered wireless powered internet of things systems. Particularly, an energy station (ES) wirelessly charges for multiple IoT devices during downlink wireless energy transfer (WET) and then these devices deliver their own message to an access point (AP) during uplink wireless information transfer (WIT). Also, an IRS is deployed to improve energy harvesting and data transmission capabilities. To enhance self-sustainability of the IRS, the IRS harvests energy from the ES based on the harvest-then-transmit protocol. In this paper, we maximize the sum throughput via optimizing the phase shifts of the IRS, the transfer time scheduling as well as the power splitting ratio. Due to the non-convexity of the formulated problem, we divide the problem into two sub-problems, each of which can be handled separately. Then, we adopt an alternating optimization (AO) algorithm with the semidefinite programming (SDP) relaxation. Also, we consider a special case where the circuit power consumption of IoT devices can be neglected. In this case, we derive a closed form solution for the optimal transmission time slots, power allocation and phase shift by the Lagrange dual method. Finally, numerical evaluations validate effectiveness of the proposed scheme, which significantly benefits from the IRS in improving network throughput.
21 August 2024 in IEEE Transactions on Wireless Communications
In this paper, we investigate an active simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) assisted integrated sensing and communications (ISAC) system, where the dual-function base station (DFBS) operates in full-duplex (FD) mode to provide communication services and performs targets sensing simultaneously. Meanwhile, we consider multiple targets and multiple users scenario as well as the self-interference at the FD DFBS. Through jointly optimizing the DFBS and active STAR-RIS beamforming under different work modes, our purpose is to achieve the maximum communication sum-rate, while satisfying the minimum radar signal-to-interference-plus-noise ratio (SINR) constraint, the active STAR-RIS hardware constraints and the total power constraint of DFBS and active STAR-RIS. To tackle the complex non-convex optimization problem formulated, an efficient alternating optimization algorithm is proposed. Specifically, the fractional programming method is first leveraged to turn the original problem into a more tractable one, and subsequently the transformed problem is decomposed into several sub-problems. Next, we develop a derivation method to obtain the closed-form expression of the radar receiving beamforming, and then the DFBS transmit beamforming is optimized under the radar SINR requirement and total power constraints. After that, the active STAR-RIS reflection and transmission beamforming are optimized by majorization minimization, complex circle manifold and convex optimization techniques. Finally, the proposed schemes are conducted through numerical simulations to show their benefits and efficiency.
5 October 2022 in IEEE Transactions on Information Forensics and Security
In this paper, we investigate the physical layer security in the reconfigurable intelligent surface (RIS)-aided cell-free networks. A maximum weighted sum secrecy rate problem is formulated by jointly optimizing the active beamforming (BF) at the base stations and passive BF at the RISs. To handle this non-trivial problem, we adopt the alternating optimization to decouple the original problem into two sub-ones, which are solved using the semidefinite relaxation and continuous convex approximation theory. To decrease the complexity for obtaining overall channel state information (CSI), we extend the proposed framework to the case that only requires part of the RIS’ CSI. This is achieved via deliberately discarding the RIS that has a small contribution to the user’s secrecy rate. Based on this, we formulate a mixed integer non-linear programming problem, and the linear conic relaxation is used to obtained the solutions. Meanwhile, we also study the system performance under the imperfect CSI. Finally, the simulation results show that the proposed schemes can obtain a higher secrecy rate than the existing ones.
21 June 2023 in IEEE Journal on Selected Areas in Communications
Reconfigurable intelligent surface (RIS)-aided terahertz (THz) communications have been regarded as a promising candidate for future 6G networks because of its ultra-wide bandwidth and ultra-low power consumption. However, there exists the beam split problem, especially when the base station (BS) or RIS owns the large-scale antennas, which may lead to serious array gain loss. Therefore, in this paper, we investigate the beam split and beamforming design problems in the THz RIS communications. Specifically, we first analyze the beam split effect caused by different RIS sizes, shapes and deployments. On this basis, we apply the fully connected time delayer phase shifter hybrid beamforming (FC-TD-PS-HB) architecture at the BS and deploy distributed RISs to cooperatively mitigate the beam split effect. We aim to maximize the achievable sum rate by jointly optimizing the hybrid analog/digital beamforming, time delays at the BS and reflection coefficients at the RISs. To solve the formulated problem, we first design the analog beamforming and time delays based on different RISs’ physical directions, and then it is transformed into an optimization problem by jointly optimizing the digital beamforming and reflection coefficients. Next, we propose an alternatively iterative optimization algorithm to deal with it. Specifically, for given the reflection coefficients, we propose an iterative algorithm based on the minimum mean square error technique to obtain the digital beamforming. After, we apply Lagrangian dual reformulation (LDR) and multidimensional complex quadratic transform (MCQT) methods to transform the original problem to a quadratically constrained quadratic program, which can be solved by alternating direction method of multipliers (ADMM) technique to obtain the reflection coefficients. Finally, the digital beamforming and reflection coefficients are obtained via repeating the above processes until convergence. Simulation results verify that the proposed scheme can effectively alleviate the beam split effect and improve the system capacity.
8 March 2023 in IEEE Transactions on Vehicular Technology
Terahertz (THz) and intelligent reflecting surface (IRS) have been regarded as two promising technologies to improve the capacity and coverage for future 6G networks. Generally, IRS is usually equipped with large-scale elements when implemented at THz frequency. In this case, the near-field model and beam squint should be considered. Therefore, in this paper, we investigate the far-field and near-field beam squint problems in THz IRS communications for the first time. The far-field and near-field channel models are constructed based on the different electromagnetic radiation characteristics. Next, we first analyze the far-field beam squint and its effect for the beam gain based on the cascaded base station (BS)-IRS-user channel model, and then the near-field case is studied. To overcome the far-field and near-field beam squint effects, we propose to apply delay adjustable metasurface to IRS, and develop a scheme of optimizing the reflecting phase shifts and time delays of IRS elements, which effectively eliminates the beam gain loss caused by beam squint. Finally, simulations are conducted to demonstrate the effectiveness of our proposed schemes in combating the far-field and near-field beam squint.