A. P. Pogoda

A. P. Pogoda

Auto-generated profile, based on publicly available information

A. P. Pogoda

Baltic State Technical University “Voenmeh” named after D. F. Ustinov, St. Petersburg, Russia

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 December 2014 in Technical Physics
Verified
Journal Article
Closed access
PDF file
VLV. F. Lebedev
V. F. Lebedev
APA. P. Pogoda
A. P. Pogoda
Sergei SmetaninSergei Smetanin
Sergei Smetanin
ABA. S. Boreisho
A. S. Boreisho
AFA. V. Fedin
A. V. Fedin
The generation regimes in a pulsed Nd:YAG laser with transverse LED pumping and multiloop self-pumped phase-conjugate cavity on the gain gratings are studied. The differential efficiency of laser is 27% in the free-running regime at a pulse energy of up to 1 J and quality parameter M 2 of no greater than 1.5. The pulse energy under passive Q-switching is no less than 60% of the pulse energy in the free-running regime at the same beam quality. The generation of the narrow-band radiation is demonstrated. A generation band of no greater than 1.2 GHz corresponds to the primary single-frequency high-power laser pulse in the free-running mode under conditions for self-Q-switching on the gain gratings. When additional elements (F 2 − :LiF and Cr4+:YAG crystals) are introduced in the optical scheme of the phase-conjugate cavity, similar narrowband single-mode generation is observed in the passive Q-switching regime as a pulse train or monopulse. The laser pulse power is up to 2 MW at a pulse duration of 20 ns.

20 March 2026 in PHOTONICS Russia
Verified
Journal Article
Closed access
ОУО.е. Удовиченко
О.е. Удовиченко
MGMikhail Gavrish
Mikhail Gavrish
СМС.с. Макарин
С.с. Макарин
ННН.в. Никоноров
Н.в. Никоноров
UPUliana Prokhorova
Uliana Prokhorova
АПА.п. Погода
А.п. Погода
В статье дан краткий обзор методов записи объемных голографических решеток Брэгга используемых в качестве оптических элементов для управления спектром излучения мощных импульсных твердотельных лазеров. Рассмотрены регистрирующие среды голографических решеток Брэгга (галогенидосеребряные эмульсии, слои хромированного желатина, кристалл ниобата лития (LiNbO3) и фототерморефрактивное стекло). Представлены схемы записи Ллойда, Майкельсона и Тальбота. Описаны требования, предъявляемые к пространственной стабильности лазерного излучения, и приведена методика их контроля. Приведены экспериментальные результаты процесса записи пропускающих решеток Брэгга в различных твердотельных материалах. Определен порог поверхностной лучевой стойкости фототерморефрактивного стекла путем регистрации пробоя поверхности решетки. Доказана возможность использования решетки в мощных импульсных лазерах.

1 December 2024 in Bulletin of the Russian Academy of Sciences: Physics
Verified
Journal Article
Closed access
PDF file
ASA. A. Sergeev
A. A. Sergeev
EPEvgeniy Popov
Evgeniy Popov
MGMikhail Gavrish
Mikhail Gavrish
PRPavel Rozanov
Pavel Rozanov
ASAlexey A. Shavelev
Alexey A. Shavelev
APA. P. Pogoda
A. P. Pogoda
A scheme of a high-power Cr:LiSAF laser operating in active Q-switching mode with a Pockels cell is developed. A method for shortening the laser pulse duration and increasing the peak power by means of intracavity transverse mode selection using an aperture diaphragm and external feedback with Bragg grating is proposed. As a result, the duration of the laser pulse was 19 ns and the pulse energy of 7.7 mJ, which corresponds to 0.41 MW of peak power at the central wavelength of 830 nm. The laser wavelength tuning was also adjusted in the range of 825–865 nm with a width of 2 nm. The results of the research obtained in this work will serve as a basis for the development of new systems for spectrometry for environmental monitoring of the atmosphere using the differential optical absorption spectroscopy method.

28 October 2026
Verified
Journal Article
Closed access
AMA. S. Mitrofanova
A. S. Mitrofanova
MGM. V. Gavrish
M. V. Gavrish
UPUliana Prokhorova
Uliana Prokhorova
PRP. K. Rozanov
P. K. Rozanov
VSV. V. Sementin
V. V. Sementin
APA. P. Pogoda
A. P. Pogoda
The problem of developing a laser system with an average output power of up to 18 W and the output energy in the pulse 0.1–0.95 J in the 800–900 nm wavelength range is addressed. The study aims to create an efficient laser source capable of delivering the specified power in the near-infrared range, which is of interest for technological, medical, and scientific applications. State-of-the-art methods for increasing the average power of laser systems in the specified range are reviewed: enhancing the cooling efficiency of active elements (including chips with distributed surface cooling and thin-disk geometry) and scaling the total power via incoherent combining of multiple laser modules. Two methods for incoherent combining of Cr:LiSAF-based laser sources are compared: spectral combining using a transmissive volume Bragg grating and direct coupling into a multimode fiber using a fiber combiner. The Cr:LiSAF source was selected due to its broad emission spectrum (from 750 to 1000 nm), which is critically important for efficient spectral combining, as well as the fact that Cr:LiSAF crystals are manufactured in Russia, have a relatively low cost compared to foreign counterparts, and are accessible to domestic developers. It should be noted that an operational prototype of the Cr:LiSAF laser has already been assembled and practical experience in its alignment and operation has been gained, establishing a reliable basis for continued development and the transition to system scaling. In addition, the investigated laser source operates in pulsed mode, offering several significant advantages. It is demonstrated that combining ten channels with a 2 nm channel spacing yields a combining efficiency of 46.5 % on the Bragg grating, whereas using a fiber combiner for three channels provides an overall efficiency of approximately 71 %, taking into account realistic optical losses (coupling, fiber transmission, combining, and output collimation). For the fiber combiner configuration, the estimated average output power reaches 16.6 W, which is close to the required value. The obtained results enable a justified selection of design parameters and architecture for the experimental implementation of a scalable laser system with a modular design. Particular attention is paid to the advantages of the pulsed operating mode in incoherent combining, which allows the average power to be scaled up without increasing the peak load on optical components. The results can be applied to the development of compact laser systems based on domestic components for aerospace and ground applications.