The ubiquity, large bandwidth, and spatial diversity of the fifth-generation (5G) cellular signal render it a promising candidate for accurate positioning in indoor environments where the global navigation satellite system (GNSS) signal is absent. In this article, a joint angle and delay estimation (JADE) scheme is designed for 5G picocell base stations (gNBs), which addresses two crucial issues to make it both effective and efficient in realistic indoor environments. First, the direction dependence of the array modeling error for picocell gNB and its impact on JADE is revealed. This error is mitigated by fitting the array response measurements to a vector-valued function and precalibrating the ideal steering vector with the fit function. Second, based on the deployment reality that 5G picocell gNBs only have a small-scale antenna array but have a large signal bandwidth, the proposed scheme decouples the estimation of time-of-arrival (TOA) and direction-of-arrival (DOA) to reduce the huge complexity induced by 2-D joint processing. It employs the iterative-adaptive approach to resolve multipath signals in the TOA domain, followed by a conventional beamformer to retrieve the desired line-of-sight DOA. By further exploiting a dimension-reducing preprocessing module and accelerating spectrum computing by fast Fourier transforms, an efficient implementation is achieved for real-time JADE. Numerical simulations demonstrate the superiority of the proposed method in terms of DOA estimation accuracy. Field tests show that a triangulation positioning error of 0.44 m is achieved for 90% cases using only DOAs estimated at two separated receiving points.
11 January 2023 in IEEE Transactions on Wireless Communications
Channel-state-information-based localization in 5G networks has been a promising way to obtain highly accurate positions compared to previous communication networks. However, there is no unified and effective platform to support the research on 5G localization algorithms. This paper releases a link-level simulator for 5G localization, which can depict realistic physical behaviors of the 5G positioning signal transmission. Specifically, we first develop a simulation architecture considering more elaborate parameter configuration and physical-layer processing. The architecture supports the link modeling at sub-6GHz and millimeter-wave (mmWave) frequency bands. Subsequently, the critical physical-layer components that determine the localization performance are designed and integrated. In particular, a lightweight new-radio channel model and hardware impairment functions that significantly limit the parameter estimation accuracy are developed. Finally, we present three application cases to evaluate the simulator, i.e. two-dimensional mobile terminal localization, mmWave beam sweeping, and beamforming-based angle estimation. The numerical results in the application cases present the performance diversity of localization algorithms in various impairment conditions.
21 March 2023 in IEEE Transactions on Microwave Theory and Techniques
Owing to the ubiquity of cellular communication signals, positioning with the fifth-generation (5G) signal has emerged as a promising solution in global navigation satellite system-denied areas. Unfortunately, although the widely employed antenna arrays in 5G remote radio units (RRUs) facilitate the measurement of the direction of arrival (DOA), DOA-based positioning performance is severely degraded by array errors. This article proposes an in situ calibration framework with a user terminal (UT) transmitting 5G reference signals at several known positions in the actual operating environment and the accessible RRUs estimating their array errors from these reference signals. Further, since sub-6 GHz small-cell RRUs deployed for indoor coverage generally have small-aperture antenna arrays, while 5G signals have plentiful bandwidth resources, this work segregates the multipath components via super-resolution delay estimation based on the maximum likelihood criteria. This differs significantly from existing in situ calibration works which resolve multipaths in the spatial domain. The superiority of the proposed method is first verified by numerical simulations. We then demonstrate via field test with commercial 5G equipment that, a reduction of 46.7% for $1{\text -}\sigma$ DOA estimation error can be achieved by in situ calibration using the proposed method.
18 January 2024 in IEEE Journal of Indoor and Seamless Positioning and Navigation
Indoor positioning is a thriving research area which is slowly gaining market momentum. Its applications are mostly customised, ad hoc installations; ubiquitous applications analogous to GNSS for outdoors are not available because of the lack of generic platforms, widely accepted standards and interoperability protocols. In this context, the Indoor Positioning and Indoor Navigation (IPIN) competition is the only long-term, technically sound initiative to monitor the state of the art of real systems by measuring their performance in a realistic environment. Most competing systems are pedestrian-oriented and based on the use of smartphones, but several competing Tracks were set up, enabling comparison of an array of technologies. The two IPIN competitions described here include only off-site Tracks. In contrast with on-site Tracks where competitors bring their systems on site - which were impossible to organise during 2021 and 2022 - in off-site Tracks competitors download pre-recorded data from multiple sensors and process them using the EvaalAPI, a real-time, web-based emulation interface. As usual with IPIN competitions, Tracks were compliant with the EvAAL framework, ensuring consistency of the measurement procedure and reliability of results. The main contribution of this work is to show a compilation of possible indoor positioning scenarios and different indoor positioning solutions to the same problem.
14 August 2017 in International Journal of Antennas and Propagation
The heavily congested radio frequency environment severely limits the signal bandwidth of the high frequency surface wave radar (HFSWR). Based on the concept of multiple-input multiple-output (MIMO) radar, we propose a MIMO sparse frequency HFSWR system to synthesize an equivalent large bandwidth waveform in the congested HF band. The utilized spectrum of the proposed system is discontinuous and irregularly distributed between different transmitting sensors. We investigate the sparse frequency modulated continuous wave (FMCW) signal and the corresponding deramping based receiver and signal processor specially. A general processing framework is presented for the proposed system. The crucial step is the range-azimuth processing and the sparsity of the carrier frequency causes the two-dimensional periodogram to fail when applied here. Therefore, we introduce the iterative adaptive approach (IAA) in the range-azimuth imaging. Based on the initial 1D IAA algorithm, we propose a modified 2D IAA which particularly fits the deramping processing based range-azimuth model. The proposed processing framework for MIMO sparse frequency FMCW HFSWR with the modified 2D IAA applied is shown to have a high resolution and be able to provide an accurate and clear range-azimuth image which benefits the following detection process.
10 November 2016 in International Journal of Antennas and Propagation
Discontinuous spectrum signal which has separate subbands distributed over a wide spectrum band is a solution to synthesize a wideband waveform in a highly congested spectrum environment. In this paper, we present a general range-velocity processing scheme for the discontinuous spectrum-frequency modulated continuous wave (DS-FMCW) signal specifically. In range domain, we propose a simple time rearrangement operation which converts the range transform problem of the DS-FMCW signal to a general spectral estimation problem of nonuniformly sampled data. Conventional periodogram results in a dirty range spectrum with high sidelobes which cannot be suppressed by traditional spectral weighting. In this paper, we introduce the iterative adaptive approach (IAA) in the estimation of the range spectrum. IAA is shown to have the ability to provide a clean range spectrum. On the other hand, the discontinuity of the signal spectrum has little impact on the velocity processing. However, with the range resolution improved, the influence of the target motion becomes nonnegligible. We present a velocity compensation strategy which includes the intersweep compensation and in-sweep compensation. Our processing scheme with the velocity compensation is shown to provide an accurate and clean range-velocity image which benefits the following detection process.