The development of soft electronics is critical to the realization of artificial intelligence that comes into direct contact with humans, such as wearable devices, and robotics. Furthermore, rapid prototyping and inexpensive processes are essential for the development of these applications. We demonstrate here an additive, low-cost method for fabricating polydimethylsiloxane based soft electronics by inkjet printing. Herein, a novel approach using a water-soluble polyvinyl alcohol layer as the substrate, inexpensive, fully digital fabrication of capacitive pressure sensors is enabled by sandwiching mesh-like conductive layers and microstructured dielectric in a straightforward, convenient manner. These sensors exhibit improved sensitivity (4 MPa −1 ) at low pressures (< 1 kPa) in contrast to sensors with a flat elastomer dielectric and can still detect large pressures around 50 kPa, having excellent long-term repeatability over 2000 cycles, without significant hysteresis (≤ 8.5 %). The tactile sensing ability of the fabricated devices was demonstrated in a practical application. Moreover, sensor characteristics are easily adjustable, simply by changing printing parameters or tuning the ink solution. The proposed approach provides scalable solution for fabricating high-sensitivity printed sensors for e-skin and human-machine interfaces.
Medical treatment is increasingly benefiting from biomedical microsystems, especially the trending telemedical application. A promising modality for tumor therapy showed the application of nanosecond pulsed electric fields (nsPEF) on cells to achieve nanoporation, cell death, and other cell reactions. A key technology for this method is the generation of pulsed fields in the nanosecond range with high-field strengths in the range of several kilovolts per centimeter. For further biomedical applications, state-of-the-art setups need to decrease in size and improve their capability of integration into microsystems. Due to demanding electronic requirements, i.e., using high voltages and fast pulses, miniaturization and low-cost fabrication of the electrode is first considered. This paper proposes a proof-of-concept for a miniaturized printed flexible electrode that can apply nsPEF on adherent fibroblast cells. The interdigital gold electrode was printed on polyimide with line-width of about 10 µm using an electrohydrodynamic inkjet printer. Furthermore, an electrical circuit was developed to generate both electrical pulses in the nano-second range and voltages up to 180 V. The electrode was integrated into an experimental setup for in-vitro application to human fibroblasts. Field strengths up to 100 kV/cm with 45 ns pulse duration were applied, depending on the degree of cell confluence. The cells show contraction, detachment from the electrode, and lethal reactions after the nsPEF treatment. Furthermore, this printed miniaturized electrode was found to be suitable for subsequent microsystem integration and further cell experiments to optimize pulse parameters for control of cell reaction and behavior.
Continuous monitoring of vital signs can be a life‐saving matter for different patient groups. The development is going toward more intelligent and unobtrusive systems to improve the usability of body‐worn monitoring devices. Body‐worn devices can be skin‐conformable, patch‐type monitoring systems that are comfortable to use even for prolonged periods of time. Herein, an intelligent and wearable, out‐of‐hospital, and in‐hospital four‐electrode electrocardiography (ECG) and respiration measurement and monitoring system is proposed. The system consists of a conformable screen‐printed disposable patch, a measurement unit, gateway unit, and cloud‐based analysis tools with reconfigurable signal processing pipelines. The performance of the ECG patch and the measurement unit was tested with cardiac patients and compared with a Holter monitoring device and discrete, single‐site electrodes.