Viktor Goots

Viktor Goots

Auto-generated profile, based on publicly available information

Viktor Goots

Vinnytsia National Agrarian University

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 March 2025 in Vibrations in engineering and technology
Verified
Journal Article
Closed access
VGViktor Goots
Viktor Goots
OSOlena Solona
Olena Solona
YPYurii Polievoda
Yurii Polievoda
BSBohdan Symonik
Bohdan Symonik
The article examines the formation of food products, particularly meat-based ones, produced from structured raw materials. The quality of the forming process is of critical importance and depends on the physico-mechanical properties of the raw materials (viscosity, plasticity, adhesion) and the correct selection of technological parameters. Standardization plays a key role in this process, ensuring consistency in the requirements for raw material composition, equipment parameters, and production conditions. National (DSTU) and international (ISO) standards define the norms for the rheological characteristics of food masses, forming accuracy, sanitary requirements, and permissible thermal and mechanical loads. Adherence to these standards enables consistent product quality, safety, and efficiency in the production process. Further research into forming processes should be based not only on the physicochemical properties of the mass but also on the requirements of current standards regulating food production under industrial conditions. The article presents the results of theoretical and experimental studies on the compression mechanism of concentrated, comminuted food raw materials, taking into account the standardization requirements for product forming processes. To model the behavior of food masses, the Kelvin body rheological model was selected, which accounts for the viscoelastic properties of the systems. This approach allows the behavior of products during deformation to be formalized in accordance with the standard technological parameters outlined in regulatory documentation for meat products. The research results, demonstrating the relationship between deformation and the duration and conditions of loading, were presented graphically. For the first time, the mechanism of residual plastic deformation was scientifically substantiated, and a mathematical model was developed for its calculation, which enables its consideration in quality control systems in accordance with current standards. These approaches can be integrated into standardized methods for monitoring and optimizing forming processes in the food industry.

28 December 2021 in Restaurant and hotel consulting. Innovations
Verified
Journal Article
Open access
PDF file
VGVictor Guts
Victor Guts
ОКОльга Коваль
Ольга Коваль
SBSvitlana Bondar
Svitlana Bondar
ВГВіктор Гуць
Віктор Гуць
Topicality. In modern conditions, the society feels a growing demand in products made from natural ingredients of high nutritional value. Such products include meat pastes, the quality of which depends on their recipe, technological processes, equipment, and modes of its operation. With the implementation of innovative technological regimes and new equipment, there is a necessity to determine and prognosticate the quality of food products at all stages of their production and sale. According to the mentioned above, as well as economic feasibility of using automated systems for technological processes management, there is a need to elaborate a new mathematical and analytical approach to assessing and prognosticating changes in the quality of meat paste with various additives. Aim and research methods. The aim of this research is to elaborate a method for modeling the material system state, based on differential equations of kinetics of biochemical processes, assessment, and prognostication of food quality. Research methods. The method of mathematical and analytical evaluation of the paste products quality is grounded on modified mathematical models, differential equations, visualisation of research results in the form of 3D graphs, obtained by using symbolic computer mathematics. The quality of new meat paste products is compared with the quality of the paste, which is assumed to be relatively optimal according to the main organoleptic parameters of sensory quality assessment and control sample. The control sample of the paste is cooked according to the classical technology, and the recipe (GSTU 4424:2005). The prototype samples are cooked according to the innovative technology, which involves adding mechanically deboned poultry meat to the main raw material. Results. New results of analytical and experimental studies of the quality of meat paste products, cooked according to the classic recipe with the use of mechanically deboned poultry meat, are offered. The method for determining the coefficients, included in the mathematical model for assessing the meat paste products quality, their analytical relation with the optimization parameter, is elaborated. The expediency of using modern methods of symbolic computer mathematics for solving and analysing differential equations, presenting results in 3D graphs, is proved. The conducted research makes it possible to prognosticate the quality of food products, to control possible changes in their recipe while using various additives, to carry out elaborating new paste products. Conclusions and discussion. Based on the results of theoretical and experimental studies, a new mathematical model for estimating the quality of meat paste products in the form of the first-order differential equation, is offered. Its analogue is the equations, recommended for modeling the processes of biochemical kinetics. It is proved that the computer programme of mathematical and analytical research and prognostication the foodstuff quality (Goots et al., 2018) is universal. The offered mathematical model makes it possible to envision the quality of meat paste products, based on organoleptic evaluation. With its help, it becomes possible to determine the vector of possible changes in product quality and its optimisation, while elaborating the 3D graph. Mathematical and analytical assessment of the new paste products quality highlights that the partial replacement of the main meat raw by mechanically deboned poultry meat, and in pastes, made according to classical technology and the GSTU recipe (4424:2005), does not really reduce the parameters of organoleptic evaluation. In some cases, they are even higher than in the control paste samples, and very close to optimal ones. This new mathematical and analytical approach to assessing the paste products quality is promising in new culinary products elaboration in the restaurant business.

22 December 2025 in Food Resources
Verified
Journal Article
Open access
PDF file
ВГВ. С. Гуць
В. С. Гуць
ННН. В. Новгородська
Н. В. Новгородська
СОС. В. Овсієнко
С. В. Овсієнко
Предмет. Вплив масової частки гарбуза на фізико-хімічні та органолептичні властивості яблучного пюре. Мета. Мета досліджень – встановити вплив різної масової частки гарбуза на фізико-хімічні та органолептичні властивості яблучного пюре і визначити оптимальне співвідношення компонентів, яке забезпечує підвищення харчової цінності продукту без погіршення його смакових характеристик. Методи. Органолептична оцінка (колір, аромат, смак, консистенцію та загальний вигляд). Фізико-хімічні показники (рН, титрована кислотність, вміст сухих розчинних речовин, β-каротин). Результати. Встановлено, що поступове введення гарбуза (10–30%) спричиняє закономірні зміни як сенсорних, так і фізико-хімічних характеристик. Зі збільшенням частки гарбуза рН зростає на 8,5%, а титрована кислотність зменшується майже на 20%, що забезпечує м’якший і збалансований кисло-солодкий смак. Вміст сухих розчинних речовин підвищується на 9%, що свідчить про накопичення природних цукрів і формування більш щільної кремоподібної текстури. Найсуттєвіші зміни відмічено за β-каротином – його концентрація збільшується у 10–15 разів порівняно з контрольним зразком. Оптимальним визнано співвідношення яблуко:гарбуз 80:20, за якого досягається найкращий баланс між кольором, ароматом, смаком, консистенцією та біологічною цінністю. Подальше підвищення частки гарбуза до 30% призводить до сенсорного дисбалансу – надмірної густини та домінування гарбузових нот. Сфера застосування результатів. Отримані результати можуть бути використані у технологіях консервування плодів і овочів, при розробленні дитячого, дієтичного та функціонального харчування, а також у виробництві купажованих пюре, соків і десертних страв підвищеної антиоксидантної активності та біологічної цінності.

25 December 2025 in Vibrations in engineering and technology
Verified
Journal Article
Closed access
VGViktor Goots
Viktor Goots
YPYurii Polievoda
Yurii Polievoda
BSBohdan Symonik
Bohdan Symonik
The article examines the deformation processes of viscoelastic systems, which are widely used in food technologies as part of transport-technological and packaging equipment. The working components of such systems (stops, guides, stoppers, springs, dampers, friction units, etc.) change their shape and dimensions under external loads, affecting the efficiency of the equipment and energy consumption. Methodological approaches are proposed for calculating the work and energy characteristics of elastic and viscoelastic elements, taking into account their structural and rheological properties. Based on the equations of rheodynamics, the work of elastic forces during compression and tension is analyzed, showing that the work depends on the square of the elongation and is independent of the trajectory or duration of the process. To account for the time-dependent characteristics of deformation, a viscous element – a damper – is introduced into the mechanical models, allowing the description of gradual spring deformation under constant or variable loads. Differential equations for parallel and series connections of elastic and viscous elements are considered, and their solutions and expressions for calculating work, deformation rate, power, and energy expenditure are obtained. Particular attention is given to cases where the deformation forces vary according to a linear or nonlinear law, including exponential, which corresponds to real conditions in packaging processes. Graphical dependencies are presented, illustrating the nature of deformation under different types of loads. The obtained relationships can be used to optimize the energy parameters of technological equipment, improve the reliability and durability of its working components, and enhance the designs of transport-technological and packaging lines.

20 May 2022
Verified
Conference Paper
Open access
PDF file
ВГВіктор Гуць
Віктор Гуць
ОКОльга Коваль
Ольга Коваль

12 October 2026 in Vibrations in engineering and technology
Verified
Journal Article
Open access
VGViktor Goots
Viktor Goots
VYVitalii Yaropud
Vitalii Yaropud
YPYurii Polievoda
Yurii Polievoda
OTOleksii Tokarchuk
Oleksii Tokarchuk
The article addresses the issue of determining energy consumption during the deformation of minced meat in food product forming, dosing, and compaction processes. Minced meat is considered as a complex viscoelastic dispersed system characterized by a combination of elastic, viscous, and plastic properties that significantly influence the nature of deformation processes and the energy performance of technological equipment. An analysis of the main factors affecting the deformation work has been carried out, including the internal resistance of the material, friction forces between the product and working surfaces, loading rate, and changes in the structural and mechanical characteristics of minced meat during compaction. A mathematical approach for evaluating the specific deformation work is proposed, taking into account the combined effect of compression work and the work required to overcome friction forces. A viscoelastic model was used to describe the behavior of minced meat, making it possible to consider changes in the rheological properties of the product under loading. A sequence for calculating the energy parameters of the process has been developed, enabling the determination of specific work, power consumption, and the nature of load variation depending on the kinematic parameters of the machine working elements. It has been established that an increase in the degree of compaction is accompanied by a decrease in product porosity, an increase in resistance to deformation, and a rise in specific energy consumption. It is shown that an important task in the design of forming equipment is the determination of the maximum technologically permissible pressure at which further linear deformation of the product practically ceases and additional energy consumption becomes inefficient. The obtained relationships can be used to substantiate rational operating modes of equipment and to select its design parameters.