Electrophysiological devices are critical for mapping eloquent and diseased brain regions and for therapeutic neuromodulation in clinical settings and are extensively used for research in brain-machine interfaces. However, the existing clinical and experimental devices are often limited in either spatial resolution or cortical coverage. Here, we developed scalable manufacturing processes with a dense electrical connection scheme to achieve reconfigurable thin-film, multithousand-channel neurophysiological recording grids using platinum nanorods (PtNRGrids). With PtNRGrids, we have achieved a multithousand-channel array of small (30 μm) contacts with low impedance, providing high spatial and temporal resolution over a large cortical area. We demonstrated that PtNRGrids can resolve submillimeter functional organization of the barrel cortex in anesthetized rats that captured the tissue structure. In the clinical setting, PtNRGrids resolved fine, complex temporal dynamics from the cortical surface in an awake human patient performing grasping tasks. In addition, the PtNRGrids identified the spatial spread and dynamics of epileptic discharges in a patient undergoing epilepsy surgery at 1-mm spatial resolution, including activity induced by direct electrical stimulation. Collectively, these findings demonstrated the power of the PtNRGrids to transform clinical mapping and research with brain-machine interfaces.
28 August 2018 in IEEE Transactions on Circuits and Systems I: Regular Papers
Precision oscillators are ubiquitous in modern electronic systems, and their accuracy often limits the performance of such systems. Hence, a deep understanding of how oscillator performance is quantified, simulated, and measured, and how it affects the system performance is essential for designers. Unfortunately, the necessary information is spread thinly across the published literature and textbooks with widely varying notations and some critical disconnects. This paper addresses this problem by presenting a comprehensive one-stop explanation of how oscillator error is quantified, simulated, and measured in practice, and the effects of oscillator error in typical oscillator applications.
15 July 2021 in IEEE Journal of Solid-State Circuits
The linearity of high-resolution current-steering digital-to-analog converters (DACs) is often limited by inter-symbol interference (ISI). While dynamic element matching (DEM) can be applied to convert a portion of the ISI to uncorrelated noise instead of nonlinear distortion, DEM alone fails to prevent ISI from at least introducing strong second-order nonlinear distortion. This paper addresses this problem by proposing, analyzing, and experimentally demonstrating a low-cost add-on technique, called ISI scrambling, that, in conjunction with DEM, causes a DAC’s ISI to be free of nonlinear distortion. The ISI scrambling technique is demonstrated in a 1-GS/s, 14-bit DEM DAC implemented in 90 nm CMOS technology. The DAC’s measured linearity is in line with the state-of-the-art and its measured output power spectra closely match those predicted by this paper’s theoretical results.
1 August 2019 in IEEE Journal of Solid-State Circuits
This paper presents a Nyquist-rate current-steering digital-to-analog converter that achieves a peak spurious-free dynamic range better than 87 dB and a peak signal-to-noise-and-distortion ratio better than 77 dB over a 265-MHz signal band. It is enabled by a fully integrated digital calibration technique that measures and cancels both static and dynamic mismatch errors over the first Nyquist band, and various circuit-level techniques that mitigate the effects of jitter and inter-symbol interference.
This paper suggests a stochastic approach to data conversion. It is applicable to serial, parallel, two-step as well as delta-sigma ADCs and DACs. In the serial implementation of this scheme, a sample-and-hold circuit, a noise source and a comparator are combined with an accumulate-and-dump digital stage to perform serial multibit A/D conversion. In the parallel ADC, M nominally identical primitive converter cells with the same input signal, x(t), but with different and uncorrelated random dither signals, d/sub i/(t) (i = 1, 2, ..., M), are combined to perform the data conversion. Possible combination of the two methodologies is also outlined.
A 2.4GHz ISM-band PLL with a 730kHz bandwidth, a 12MHz reference, an on-chip loop filter, and worst-case phase noise of -101 dBc/Hz and -124dBc/Hz at 100kHz and 3MHz offsets, respectively, is enabled by an adaptive phase-noise cancellation technique with 35mus settling time. The 0.18mum CMOS IC measures 2.2times2.2mm2, and its core circuitry draws 20.9mA from a 1.8V supply.