15 May 2023 in Applied Physics Letters
Metal electrode materials play a crucial role in determining the performance of microscale perovskite-based devices. However, it is a great challenge to in situ investigate the influence of different metal electrode materials on the performance of the same piece of a microscale perovskite due to the strong bonding between the perovskite and the electrode. To this end, a strategy to fabricate soft-sandwiched perovskite junctions by employing a liquid metal as top electrode was put forward. By taking full use of the adhesion of the top liquid metal electrode, the bottom electrode can be freely replaced by different metal materials without mechanical damage and chemical contamination. It is demonstrated that the shape of the instantaneous photocurrent upon light illumination and the rectification behavior of perovskite junctions can be controlled by the electrode materials and the light intensity. The shape of instantaneous photocurrent is mainly controlled by the light intensity rather than electrode materials. In contrast, the rectification ratio is mainly determined by the electrode materials instead of the light intensity. The underlying mechanism for these observations is elucidated based on the energy-level alignment in the junctions. The detachable soft junctions are expected to be widely applied to study the influence of external electrodes on the carrier transport of various microscale/nanoscale objects.
30 June 2020 in Mathematical Problems in Engineering
Gas holdup is an important parameter in the carbonation reaction for processing red mud. In this paper, for estimating the gas holdup of Venturi carbonation reactor, water model experiments were performed. The effects of superficial gas velocities, superficial liquid velocities, and liquid-to-solid and height-to-diameter ratio on the gas holdup are investigated. Through dimensional analysis using Buckingham π principle, a derivation of the empirical correlation is also proposed. The results indicate that gas holdup increases with the increase in gas velocity, with the decrease in liquid velocity, with the increase in liquid-to-solid ratio, and with the increase in height-to-diameter ratio. The calculated results from the empirical correlation agree well with the experimental data, which is important for designing a highly efficient Venturi reactor with a high temperature, high pressure, and three phases of gas, liquid, and solid.
1 January 2022 in Acta Physica Sinica
磁电阻作为表征自旋阀结构最具代表性的特征之一,是研究多层膜层间耦合作用的重要研究手段.稀土/磁性过渡金属通过耦合和界面效应诱导室温下稀土具有磁性,插入中间非磁金属层通过调控层间耦合作用实现自旋阀结构将有利于拓展稀土在自旋电子学领域的应用.文中通过分析具有不同Cr层厚度(tCr)的Gd (4 nm)/Cr (tCr)/FeCo (5 nm)三层膜室温下面内磁电阻效应研究了薄膜的层间耦合和界面效应.研究发现,相对于FeCo薄膜,Gd/FeCo薄膜表现出更为明显的各向异性磁电阻.Cr的插入使得电流垂直于磁场时的磁电阻在低场峰值位置处出现一极小值,且这个极小值随着tCr的增加变得更加明显.当tCr=3 nm时,几乎完全表现为负自旋阀磁电阻效应.FeCo层与Cr/Gd形成的不同的自旋散射不对称是产生这一负自旋阀磁电阻效应的主要原因.电流平行于磁场时磁电阻峰值随tCr的振荡和低温下的磁滞回线证实了低温和室温下层间耦合的存在.
20 October 2022 in Current Applied Physics