1 October 2025 in Physics of Fluids
Flow-induced vibrations (FIVs) of noncircular cylinders, particularly D-section bodies, frequently occur under low Reynolds number and low mass ratio conditions in applications, such as cables, risers, and microscale structures. Compared to circular cylinders, these configurations exhibit greater dynamic complexity and higher safety risks. At low Reynolds numbers, the interaction and transition between vortex-induced vibration (VIV) and galloping are still not sufficiently understood. This study numerically investigates the transverse FIV of a D-section cylinder at a Reynolds number of 100 and a mass ratio of 10, through reduced velocities from 2 to 20 and angles of attack from 0° to 180°. Five distinct vibration regimes are identified: typical VIV; transitional response I; small-amplitude VIV (S-VIV); transitional response II; and galloping. The results reveal that increasing the angle of attack progressively drives the system through multiple vibration regimes, transitioning from typical VIV, through intermediate states, to galloping. Lock-in, beating phenomena, and 2S vortex shedding dominate in the VIV regimes, while galloping exhibits persistent frequency separation, rising amplitudes, and multiple vortex shedding within one vibration cycle. Energetic analysis shows strong coupling between vibration and wake evolution, with frequency harmonics inducing anomalous amplitude peaks. These findings elucidate the underlying mechanisms that govern VIV–galloping transitions and underscore the critical role of angle of attack in determining the dynamic response.
1 November 2025 in Physics of Fluids
Enhancing the performance of biomimetic underwater vehicles requires a deeper understanding of the fluid dynamics of fish-like undulation kinematics. This study numerically investigates the hydrodynamic performance and wake structures of a two-dimensional (2D) foil undergoing asymmetric (outward vs retract) traveling wave undulation. A kinematic model integrating quarter-specific asymmetry (parameterized by ζ) with a foil of constant midline length is used to systematically explore the effects of Reynolds number (Re=250–2000), Strouhal number (St=0.1–1.0), and motion asymmetry (ζ=0.6–1.4). The results show that asymmetric motion with a slow-outward/fast-retract stroke (ζ>1) improves thrust generation and shifts the drag-thrust boundary to lower values of Re and St, although at the expense of reduced efficiency compared to symmetric motion (ζ=1). We propose a generalized thrust model for the 2D undulating foil, C¯T=c1Rec2St3+C¯T0, which is valid within the studied parameter space. The coefficients c1 and c2 exhibit a strong dependence on ζ. Furthermore, four distinct wake structures are identified, showing transitions governed by Re, St, and ζ. While hook-shaped vortices (ζ>1) enhance thrust and tadpole-shaped vortices (ζ<1) impair it, both are linked to low propulsive efficiency due to power dissipation from lateral motions. The direction of wake deflection can be altered by vortex interactions and can be determined from the distribution of the dimensionless cycle-averaged velocity and pressure, along with their relative magnitudes on the upper and lower surfaces of the foil. These findings may help provide insights into the flow physics of fish-like propulsion and offer practical implications for the design and control of bio-inspired underwater vehicles.
23 September 2025 in Advanced Materials Technologies
6 July 2026 in Journal of Fluids and Structures
21 October 2026 in Physical Review Fluids
Flow-induced vibrations are often classified by frequency synchronization, but this alone can obscure changes in the coupling between fluid forces and structural motion. Simulations of an inclined D-section cylinder at low Reynolds number reveal a finite interval in which lift and motion separate in frequency and their phase difference wanders. This transitional response connects lock-in to low-amplitude, nearly antiphase motion without developing into sustained galloping.
9 February 2026 in IEEE Robotics and Automation Letters
Pectoral-fin-based (labriform) swimming combines high-speed propulsion with agile maneuverability through rigid–flexible fin partitioning. Inspired by this principle, we present a multi-stable soft robotic swimmer composed of two wedge-shaped bistable actuators integrated with fin-like rigid–flexible morphologies. The bistable actuators generate large, rapid deformations for thrust production, while the compliant fin membranes enable drag-reducing feathering during recovery. An analytical model is developed to predict the shape of bistable actuators and is validated experimentally with a minimum prediction accuracy of 97.74%. Computational fluid dynamics (CFD) analysis reveals that bistable switching induces vortex dipole ejection, contributing to thrust generation. The proposed robot attains a maximum speed of 17.53 $\text{cm}\cdot \text{s}^{-1}$ (1.10 $\text{BL}\cdot \text{s}^{-1}$), a turning radius of 0.58 per body length, and a turning speed of 31.51$^\circ$/s, highlighting our design in shaping both swimming speed and maneuverability. By integrating bistable actuation with bio-inspired fin morphologies, this work offers a principled design strategy for achieving fast and maneuverable swimming in robotic systems.