The development of silicon carbide (SiC) MOSFETs has enabled the design of power electronic converters with significantly higher efficiency, power density, and maximum allowed operating temperatures. Gate driver circuits are essential for fully exploiting the superior electrothermal capabilities of SiC MOSFETs. Conventional gate drivers rely on fixed designs that limit performance improvements under varying load conditions—conditions commonly encountered in emerging applications, such as renewable energy systems and electric vehicles (EVs). In contrast, active gate drivers (AGDs) allow s dynamic adjustment of switching and conduction behavior to meet specific performance objectives. However, effective AGD control requires computationally demanding algorithms operating in real time. This article presents an overview of key AGDs designs and compares three prominent real-time control approaches for AGDs: model-based, partial-model-based, and model-free. All three approaches have been experimentally validated, and key results are presented and analyzed. Future perspectives of AGDs design and operation are also discussed.
3 September 2025 in IEEE Transactions on Power Delivery
DC-DC solid-state transformer (SST) is becoming more and more popular for medium voltage applications. This topology, due to its modularity, has the potential to present high levels of reliability. However, there is a lack of a proper design method that ensures reliable converter operation with minimal total cost of ownership. In this paper, a reliability model of the DC-DC stage of the SST is presented that includes infant mortality, random failures, and aging failures while considering and comparing the 2-level full-bridge and the 3-level half-bridge as possible submodule configurations, which are conventional solutions in SST systems. Furthermore, an analytical expression on the total cost of ownership of the converter is developed which includes installation, operation, repair, and downtime costs. A minimization problem is then formed with objective function the total cost of ownership and the number of redundant submodules as degrees of freedom. A case study is given to demonstrate the analysis and conclusions that can be drawn using the proposed method. The analysis shows that despite the increase in initial investment costs, redundancy can lead to significant reductions in total cost of ownership over the lifetime of the converter. In addition, design decisions can be severely impacted by the cost of downtime and the ability to restore the operation of the converter quickly after a fault.
This paper presents the concept and real-time implementation of a new modulation method for a three-level neutral-point-clamped (NPC) inverter, called online adaptive space vector modulation (oaSVM). It is based on SVM but explores any triangle containing the reference voltage and chooses three voltage vectors that improve the trade-off between inverter switching losses and load current THD. The resulting mixed-integer optimization problem has a combinatorial complexity and is solved using a branch and bound method which is implemented for real-time execution on an FPGA. The loss-thdtrade-off of oaSVM and SVM are compared in MATLAB-simulations. Hardware-in-the-loop (HIL) simulations on a system-on-chip (SoC) consisting of a CPU and FPGA show execution times that make this implementation feasible for real-time applications.
20 January 2026 in IEEE Open Journal of Power Electronics
This work presents an efficiency-oriented modulation and morphing strategy for a three-phase three-level dual active bridge converter operating across both 800 V and 400 V electric vehicle battery systems. By reconfiguring the converter into a single-phase dual active bridge or a hybrid half-bridge/full-bridge structure at light-load, the proposed approach reduces current-invariant losses. A unified dual phase-shift framework is formulated to analytically model power flow and peak-current minimization across all three-level modulation variants, inner phase shift, duty-cycle control, and T-type zero-level modulation, demonstrating that all combinations produce equivalent voltage and current waveforms. Simulation efficiency maps are generated for all valid primary/secondary modulation pairs and indicate that inner and duty-cycle modulation achieve the highest efficiency across the full operating window. Hardware-in-the-loop experiments confirm stable three-phase-to-single-phase morphing and accurate power tracking between reference and measured power profiles for both voltage levels. The results validate that the proposed morphing strategy enables wide-range, auxiliary-free light-load operation suitable for next-generation EV charging architectures.
27 January 2025 in IEEE Transactions on Power Electronics
The demand for ultrafast charging of electric heavy-duty vehicles drives the development of megawatt-level interfaces with the medium-voltage grid. Modular multilevel converter (MMC)-based chargers offer a promising solution, utilizing a single medium-frequency transformer (MFT) to enhance power density. This article proposes a novel modulation strategy for ac/ac MMCs with rectangular-wave output that leverages the separation of low-frequency and medium-frequency components within the modulation stage. This separation reduces the scaling factor between the switching frequency and the MFT's operating frequency, enabling the use of higher operating frequencies for the MFT. This, in turn, facilitates the size reduction of the MFT without compromising the efficiency of the MMC. The findings demonstrate significant improvements in the modulator, including higher time resolution of waveform synthesis, and reduced harmonic distortion in the MMC's terminal voltages and currents. This, in turn, enables soft-switching operation in the power converters. Experimental results are given to validate the theoretical analysis and practical feasibility of the proposed modulation and soft-switching strategies.
22 December 2025 in IEEE Transactions on Power Electronics
Quantum computing is rapidly emerging as a promising technology for solving complex optimization problems that arise in various engineering fields. Therefore, it holds significant promise to transform the computational foundations of power electronics. Motivated by this potential, this paper adopts a visionary perspective to examine how quantum computing could influence the evolution of power electronics in areas such as converter design, control, modulation, simulation workflows, and beyond. Within this framework, the current status, limitations, and anticipated progress of quantum algorithms and hardware are discussed, together with their potential to enable efficient solutions to large-scale, multiobjective, mixed-integer optimization problems. To place these developments in context, the paper begins with a concise tutorial on fundamental concepts in quantum computing, serving as both an introduction to the field and a bridge to its potential applications in power electronics. As a first step in this direction, the use of quantum computing for solving offline mixed-integer optimization problems commonly encountered in power electronics is examined. To this end, a simplified power electronics design problem is reformulated as a quadratic unconstrained binary optimization (QUBO) problem and executed on quantum hardware, despite current limitations such as low qubit counts and hardware noise. This demonstration marks a pioneering step towards leveraging quantum computing in power electronics and motivates the value of early adoption and exploration. Building on these insights, the paper outlines a forward-looking vision in which quantum computing becomes an integral part of the computational landscape of power electronics, guiding its transition from classical to quantum-enabled design and operation.