Nano-ridge engineering (NRE) is a novel heteroepitaxial approach for the monolithic integration of lattice-mismatched III-V devices on Si substrates. It has been successfully applied to GaAs for the realization of nano-ridge (NR) laser diodes and heterojunction bipolar transistors on 300 mm Si wafers. In this report we extend NRE to GaSb for the integration of narrow bandgap heterostructures on Si. GaSb is deposited by selective area growth in narrow oxide trenches fabricated on 300 mm Si substrates to reduce the defect density by aspect ratio trapping. The GaSb growth is continued and the NR shape on top of the oxide pattern is manipulated via NRE to achieve a broad (001) NR surface. The impact of different seed layers (GaAs and InAs) on the threading dislocation and planar defect densities in the GaSb NRs is investigated as a function of trench width by using transmission electron microscopy (TEM) as well as electron channeling contrast imaging (ECCI), which provides significantly better defect statistics in comparison to TEM only. An InAs/GaSb multi-layer heterostructure is added on top of an optimized NR structure. The high crystal quality and low defect density emphasize the potential of this monolithic integration approach for infrared optoelectronic devices on 300 mm Si substrates.
8 November 2022 in Progress in Photovoltaics: Research and Applications
After a short description of the evolution of metal-oxide-semiconductor device architectures and the corresponding requirements on epitaxial growth processes, the manuscript describes the material properties of complicated Si/SiGe multi-layer stacks used for complementary field effect transistor (CFET) devices. They contain two different Ge concentrations and have been grown using conventional process gases. A relatively high growth temperature is used to obtain acceptable Si and SiGe growth rates. Still island growth has been suppressed for Ge concentrations up to 40%. Excellent structural and optical material properties of the Si/SiGe multi-layer stack will be reported, with up to 3 + 3 Si channels in the top and bottom part of the stack, respectively. The absence/presence of lattice defects has also been verified by room-temperature photoluminescence measurements. Photoluminescence measurements at low temperatures are used to study band-to-band luminescence from individual sub-layers and to illustrate the optical material quality of the CFET stack.
Structural and electrical properties of a- and a + c-type threading dislocations in metal-organic vapor-phase epitaxy-grown -doped (0001) are determined by combining multiple scanning probe microscopy approaches. The analysis examines the space-charge region (SCR) formed around dislocation cores and clarifies the role it plays in influencing the local recombination, the surface-potential characteristic, and even the conductivity. Direct evidence of the SCR is obtained from a differential capacitance (dC/dV) measurement at dislocation sites on the (0001) surface. Experimental dC/dV (V) measurement results supported by technology computer-aided design calculations of capacitance, accounting for the theoretical deep levels related to different atom-core structures of the identified dislocations, reveal quantitative differences in their respective trap densities. This study is extended to p-n vertical diodes to analyze the doping distribution across active layers. Through a correlated cross-section investigation combining electron-channeling contrast-imaging microscopy, the underlying dislocations within the depth limited by the screening of their SCRs are found to severely impact the homogeneity of the cross-section dC/dV contrast in the low-doped n-type drift layer of the diodes. This raises serious concerns regarding any quantification efforts by differential capacitance measurements in on , where the dislocation density is in the order of .