1 September 2024 in AiBi Revista de Investigación, Administración e Ingeniería
La presente investigación tuvo como objetivo evaluar el uso de gemelos digitales empleados en los sistemas de producción, como herramienta de mejoramiento de los procesos para la adaptación organizacional enfocado a la industria 5.0. Utilizando la metodología PRISMA, se llevó a cabo una revisión sistemática de literatura publicada en los últimos cinco años en las bases de datos de Scielo, Science Direct, Redalyc y Scopus, centrada en identificar, analizar y evaluar los modelos de gemelos digitales aplicados en diferentes contextos de producción. Los resultados indican una variedad de modelos de gemelos digitales, desde sistemas integrados de simulación y análisis de datos hasta soluciones específicas para optimización de procesos y mantenimiento preventivo. Se observó que los gemelos digitales mejoran significativamente la eficiencia operativa, la gestión de inventarios y la capacidad de adaptación en respuesta a las fluctuaciones del mercado. Además, facilitan la integración de nuevas tecnologías y promueven una cultura de mejora continua y adaptabilidad dentro de las organizaciones. En conclusión, los gemelos digitales se presentan como herramientas cruciales para el avance hacia la industria 5.0, ofreciendo beneficios significativos en términos de eficiencia y adaptabilidad operacional. Su implementación permite a las empresas mejorar la toma de decisiones, aumentar la eficiencia operativa, reducir costos, optimizar procesos, además de responder más rápido y efectivo a las demandas del entorno competitivo actual y cambiante.
1 September 2022 in International Journal of Power Electronics and Drive Systems (IJPEDS)
ECEndrickson Ramón Vera- Cedeno
Endrickson Ramón Vera- Cedeno
+1
Flow rate and pressure are variables of great interest in the process control industry, especially in pumping systems. With the help of modeling and simulation, it is possible to understand the operation of these systems prior to their construction, in addition to allowing their behavior to be analyzed in various operational scenarios and testing different control strategies. In this work, the hydraulic, mechanical, electrical and electronic models of the different components of the system are studied. Two study cases for automatic flow control are assembled, using Simscape library from MATLAB/Simulink R2019b. This study cases are: i) with a control valve and ii) with a variable speed drive. The simulations determined that both cases keep the flow constant in the face of pressure disturbances, with a good dynamic response. Case 2 consumes less power than case 1, between 24 and 64% less, especially at low flow rates. It also reduce unwanted mechanical and electrical problems due to sudden starts and stops. Case 2 produced harmonic pollution on both the grid and motor sides, which implies a potential risk for the motor and the electrical grid. Case 2 was experimentally validated, obtaining errors of less than 10%.
30 August 2019 in International journal of physical sciences and engineering
APAntonio Vázquez Pérez Pérez
Antonio Vázquez Pérez Pérez
CBCiaddy Gina Rodríguez Borges Borges
Ciaddy Gina Rodríguez Borges Borges
This work shows the design project of a photovoltaic system to power a home, based on a demand study and its general characteristics, the area available for the assembly was considered of the modules, the geographical location and the meteorological data of the place. With this information, the pertinent calculations were made to ensure that the installation provides the energy necessary to cover the consumption of the home and that it also delivers the surplus energy to the network. PVsyst software was used for the design of the photovoltaic system. To verify the advantages of the implementation of the photovoltaic arrangement, the benefit-cost ratio was evaluated, carrying out an environmental impact analysis taking into account the reduction of CO2 emissions into the atmosphere and the tons of fossil fuel stopped burning when generating electricity with This source of energy. It is convenient to install.
6 February 2020 in International journal of physical sciences and engineering
Decentralized generation today assumes a very important role in the stability of electric power, especially in rural areas where electric power supplied by large Power plants, is delivered to points of consumption with a poor quality of energy this due to the distance that is found, from the generation to the final consumer, the implementation of the GD is directly related to the increase in the quality of electric energy as well as providing flexibility to the electrical distribution system. The deployment of distributed generation in electricity distribution networks can potentially increase their reliability and reduce the cost of power, by installing energy sources closer to the demand or consumption points. This type of generation involves a great variety of energy sources, such as; wind, solar, hydraulic, fossil fuels, biomass, among others.