18 April 2024 in IEEE Transactions on Power Electronics
The conventional model predictive torque control (MPTC) used for dual three-phase permanent magnet synchronous motors (DTP-PMSMs) faces several challenges, such as significant computational burden, large current harmonics, and large torque and flux ripples due to the application of imprecise voltage vectors. To address these issues, a novel three-vector-based MPTC strategy was introduced in this study for DTP-PMSMs. First, virtual vectors were adopted to reduce the current harmonic components. Second, four candidate vector groups were determined based on torque deviation and flux position. Each candidate vector group comprised two virtual vectors and one zero vector, which enabled the precise control of torque and flux through the duty-ratio modulation strategy. Third, the switching sequence was optimized to facilitate implementation in digital controllers. Then, a cost function was defined to evaluate the average torque and flux ripples of each candidate vector group in a sampling period, and the one with the minimum cost function was applied in the next sampling period. This approach effectively reduced the current harmonics, torque ripple, and flux ripple while avoiding large computational burden. Finally, experiments were conducted to demonstrate the effectiveness of the proposed method.
28 August 2023 in IEEE Transactions on Transportation Electrification
Voltage and flux model-based rotor flux estimation has been extensively applied in sensorless surface-mounted permanent magnet synchronous machines (SPMSMs) drives. Considering that the performance of the position estimation is undoubtedly influenced by dc offset from initial conditions, and integration drift from current measurements, which are serious threat to the stable operation of sensorless control system. To tackle with this problem, this article proposed an improved rotor flux observer to suppress the deviation of rotor flux estimation, using the steepest descent optimization to minimize the error between the estimated rotor flux and PM flux linkage to realize disturbance compensation, which leads to its robustness against the dc disturbance existed in the pure integration method. Furthermore, motivated by the model predictive control, the flux-oriented finite position set phase-locked loop (FO-FPS-PLL) based on dichotomy, which combines with the spatial relationship between the estimated and reference synchronous rotating frame, is applied for sensorless SPMSM drives. Finally, the experimental results based on a 1kW PMSM drive platform validate the proposed sensorless control scheme.
6 October 2023 in IEEE Transactions on Industrial Electronics
Traditional deadbeat predictive current control is an effective control approach, due to its simple concept, easy implementation, and fast dynamic response. However, the parameter mismatch is one of the main problems affecting its wide application. Model-free predictive current control on the basis of the extended state observer (ESO-MFPCC) is an effective solution to the above problem, while the bandwidth limitation in ESO will reduce the control performance. Moreover, because of the voltage limitation of the power converter, in response to load impacts, the motor potentially has poor dynamic performance under the overmodulation region. In order to solve these above problems, model-free predictive current control on the basis of the adaptive sliding mode observer (ASMO-MFPCC) with an overmodulation scheme is proposed. First, the ASMO-MFPCC can preferably improve system parameter robustness without bandwidth limitation. In addition, the vertical method for optimizing dynamic performance in the overmodulation region is proposed, so that the quicker and better dynamic response is obtained between the linear modulation region and the overmodulation region. Finally, the feasibility and effectiveness of the method, carried on a 1-KW surfaced permanent magnet synchronous motor, are verified through the experimental results.
15 February 2022 in IEEE Transactions on Power Electronics
In this article, an innovative hybrid position estimation strategy along with the minimum voltage vector injection (MVVI) method and the back electromotive force (back EMF) based method is proposed for interior permanent magnet synchronous motors (IPMSMs) in full-speed regions. At zero- and low-speed, the MVVI method based on rotor saliency is used for position estimation; the inverter voltage error is counteracted in estimating the rotor position, minimizing the inverter nonlinearity effect without introducing external errors. For IPMSMs at the initial state, this article proposes to utilize the high frequency d -axis current excited by injection voltage itself directly for the polarity detection. The position estimation at low-speed based on the MVVI method has such advantages as no requirement for filters, fast convergence, and reliability of magnetic polarity detection. In addition, a smooth transition blends the MVVI method and the back EMF based method is proposed, and a compensation term based on q -axis feedback current is added on the error of both the reference and feedback speed to reject the load-disturbance within the low speed and transition region. Experimental results show that the proposed hybrid sensorless control strategy exhibits excellent performance in the full speed range for both steady-state and dynamic operations.
4 October 2023 in IEEE Transactions on Transportation Electrification
The control performance of conventional model predictive torque control (MPTC) is restricted by two key factors: motor parameter mismatches and weighting factors tunning. To solve the above problems, a robust parallel model predictive torque control (RP-MPTC) is proposed in this paper. Firstly, a cost function in the form of proportion integral is designed to improve robustness. Based on the proposed cost function, not only the current moment error is considered, but also the error of the past moment is accumulated. In this way, the strategy can improve the robustness of system parameters without disturbance observers. Then through a parallel structure, this structure simultaneously optimizes the torque and flux and then selects the common optimal voltage vector to eliminate the weighting factor. The contributions of the proposed RP-MPTC strategy are that it can improve the robustness of parameter mismatches and eliminate the weighting factor to avoid cumbersome the weighting factor tunning. Finally, the experiment is carried on 1.5kW permanent magnet synchronous motor (PMSM) to verify the superiority of RP-MPTC.