Simone Herzog

Simone Herzog

Auto-generated profile, based on publicly available information

Simone Herzog

Institute for Materials Applications in Mechanical Engineering, RWTH Aachen University, Augustinerbach 4, 52062 Aachen, Germany

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 April 2021 in Metals
Verified
Journal Article
Open access
PDF file
SQSiyuan Qin
Siyuan Qin
SHSimone Herzog
Simone Herzog
AKAnke Kaletsch
Anke Kaletsch
CBChristoph Broeckmann
Christoph Broeckmann
Laser powder-bed fusion (LPBF) enables the production of difficult-to-machine materials with near-net shape and complex geometries. Components made of tool steels produced by LPBF, even using high preheating temperature, tend to show residual porosity, cracks, and high residual stresses. Hot isostatic pressing (HIP) is able to densify components and modify their microstructure. Moreover, compared to conventional heat treatment at ambient pressure, rapid cooling within the HIP vessel can alleviate thermal stresses, warping or cracking during quenching. In this study, the effects of isostatic pressure on microstructure evolution and residual stresses are investigated. Samples were produced by LPBF. Partly, they were conventionally heat treated by austenitizing, quenching, and tempering, partly using a HIP-device with an integrated quenching facility. The microstructure was characterized by optical microscopy, scanning electron microscopy employing energy-dispersive X-ray spectroscopy, and X-ray diffraction analysis. The results showed that besides the densification of the material to the porosity of 0.001%, HIP influenced the microstructure evolution by retarding recrystallization during austenitization due to the pressure and led to slight compressive residual stresses around 11 MPa on the surface of components.

9 September 2022 in Powders
Verified
Journal Article
Open access
PDF file
SQSiyuan Qin
Siyuan Qin
YBYutao Bo
Yutao Bo
SHSimone Herzog
Simone Herzog
Bengt HallstedtBengt Hallstedt
Bengt Hallstedt
AKAnke Kaletsch
Anke Kaletsch
CBChristoph Broeckmann
Christoph Broeckmann
Laser powder bed fusion is an attractive manufacturing technology promising novel components for the aircraft, automobile, and medical industries. However, depending on the material, some defects in the parts, especially pores or microcracks, cannot be avoided in the LPBF process. To achieve a part with low defect density, the optimal parameter sets must be determined. Many investigations have focused on how laser speed and laser power influence the melting process and the relative density of as-built parts. In this study, we considered laser and heated powder beds as two energy input sources, represented by volume energy density and preheating temperature, respectively. The interaction of these two energy inputs for the fabrication of AISI H13 was investigated. It was found that high preheating temperatures shifted the optimal parameter sets from the low energy density area to the high energy density area. In addition, high preheating also led to hot cracking, which was confirmed with Scheil solidification simulations.

31 May 2021 in Powder Metallurgy
Verified
Journal Article
Closed access
JKJohannes Kunz
Johannes Kunz
SHSimone Herzog
Simone Herzog
AKAnke Kaletsch
Anke Kaletsch
CBChristoph Broeckmann
Christoph Broeckmann
In this study, the microstructure and mechanical properties of martensitic hot-work tool steel AISI H13 produced by laser powder bed fusion (LPBF) under argon atmosphere in different LPBF process times were analysed in the as-built, hardened and tempered (HT) and hot isostatic pressed, hardened and tempered (HIP+HT) condition and compared to conventionally manufactured reference material. Three parameter sets were selected to adjust an initial defect density of 0.6%, 0.9% and 2.2% and thus process time reductions of 17% and 29%. We observed a change in the defect type from almost argon-free microcracks to argon-filled pores with higher scan velocities. Argon embrittlement was evident also in the results of tensile, notched impact toughness and fatigue tests. After HIP+HT a fatigue strength of 972 MPa was obtained for the set with 0.6% microcracks, but only 775 MPa and 718 MPa were obtained for samples with argon porosity.

30 March 2021 in Powder Metallurgy
Verified
Journal Article
Closed access
SRSebastian Riehm
Sebastian Riehm
VFVera Friederici
Vera Friederici
SWSandra Wieland
Sandra Wieland
YDYuanbin Deng
Yuanbin Deng
SHSimone Herzog
Simone Herzog
CBChristoph Broeckmann
Christoph Broeckmann
The combination of Additive Manufacturing (AM) and Hot Isostatic Pressing (HIP) offers great potential for industrial applications. Skilfully connecting AM and HIP creates a manufacturing process that unites the advantages of the two approaches. We demonstrate a production route for composite components by combining AM and HIP: a HIP capsule made of corrosion resistant steel is additively manufactured using Powder Bed Fusion with Laser Beam (LPBF). Before LPBF, the distortion and shrinkage of the capsule due to HIP is compensated by optimising the capsule’s geometry using Finite Element (FE) simulation of the HIP process. The capsule is filled with steel powder and manufactured by a conventional powder HIP. After HIP, the capsule remains as an outer layer on the component, so that a functional net-shape composite component is produced. Subsequent investigations show that a complex extruder screw segment can be successfully produced with a geometrical deviation smaller than 1.5%.

Verified
Journal Article
Open access
PDF file
MMMarkus Mirz
Markus Mirz
SHSimone Herzog
Simone Herzog
CBChristoph Broeckmann
Christoph Broeckmann
AKAnke Kaletsch
Anke Kaletsch
Duplex stainless steels (DSSs) have excellent mechanical properties, owing to their austenitic-ferritic microstructure. The phase equilibrium strongly depends on solidification conditions and chemical composition, where elemental nitrogen significantly stabilizes the austenitic phase. When DSSs are processed by laser powder bed fusion (L-PBF) under an argon atmosphere, the rapid cooling rates result in an undesirable fully ferritic microstructure. To better understand the microstructure formation, this study examined the influence of the L-PBF process atmosphere on the porosity, microstructure, and mechanical properties of DSS AISI 318LN. Gaseous argon and nitrogen were used as a protective atmosphere, and specimens were analyzed in the as-built and post-processed conditions via optical and electron microscopy, electron backscatter diffraction, and tensile testing. Specimens processed under a nitrogen atmosphere showed a lower initial density in the as-built conditions, and tended to form more lack-of-fusion and gas pores compared to specimens processed under argon. The different defect types in nitrogen-processed specimens were still present after solution-annealing and quenching, leading to a 13% lower tensile strength and 43% lower elongation at fracture. Differences in phase equilibrium caused by the process atmosphere could not be established. All differences in porosity can be minimized by hot isostatic pressing, thus resulting in comparable mechanical properties of argon- and nitrogen-processed specimens.

26 August 2023 in Materials Letters
Verified
Journal Article
Closed access
LBLouis Becker
Louis Becker
FRF. Radtke
F. Radtke
JLJonathan Lentz
Jonathan Lentz
SHS. Herzog
S. Herzog
CBC. Broeckmann
C. Broeckmann
WSWeber Sebastian
Weber Sebastian