16 June 2010 in Applied Physics A
27 August 2010 in Optics Express
Ultrafast pulsed laser irradiation is demonstrated to be able to produce surface nano-structuring and simultaneous crystallization of amorphous silicon thin film in one step laser processing. After fs laser irradiation on 80 nm-thick a-Si deposited on Corning 1737 glass substrate, the color change from light yellow to dark brown was observed on the sample surface. AFM images show that the surface nano-spike pattern was produced on amorphous-Si:H film by fs laser irradiation. Furthermore, micro-Raman results indicate that the a-Si has been crystallized into nanocrystalline Si. Also, the absorptance of the fs laser treated Si thin film was found to increase in the spectrum range of below bandgap compared to original untreated a-Si. The developed process has a potential application in fabrication of high efficiency Si thin film solar cells.
22 February 2018 in Journal of Physics D: Applied Physics
A single step direct picosecond laser texturing process was demonstrated to be able to obtain a superhydrophobic surface on a nickel substrate, a key material for mold fabrication in the manufacture of various devices, including polymeric microfluidic devices. A two-scale hierarchical surface structure of regular 2D array micro-bumps with nano-ripples was produced on a nickel surface. The laser textured surface initially showed superhydrophilicity with almost complete wetting of the structured surface just after laser treatment, then quickly changed to nearly superhydrophobic with a water contact angle (WCA) of 140° in less than 1 d, and finally became superhydrophobic with a WCA of more than 150° and a contact angle hysteresis (CAH) of less than 5°. The mechanism involved in the process is discussed in terms of surface morphology and surface chemistry. The ultra-fast laser induced NiO catalytic effect was thought to play a key role in modifying the surface chemistry so as to lower the surface energy. The developed process has the potential to improve the performance of nickel mold in the fabrication of microfluidic devices.
19 July 2013 in IEEE Transactions on Nanotechnology
In this paper, the slanting silicon nanohole (SiNH) structure is systematically designed and analyzed by simulation using the finite-element method. The slanting angle of the SiNH structure is fixed at 40° based on the Si(111) wafer. The impact of the SiNH diameter (D) and structural periodicity (P) on the light absorption has been examined. It is found that the absorption is significantly enhanced due to the much suppressed light reflection on the top surface and the strong light trapping ability of the slanting SiNH structure. At the P of 700 nm and D/ P ratio of 0.85, the optimal structural parameters are achieved with the highest ultimate efficiency of 32.9%. It is higher than that of the vertical SiNH structure counterpart which has a value of 29.7%. The physical mechanism of the enhanced light absorption is also discussed.
26 April 2013 in Journal of Physics D: Applied Physics
In this paper, we have demonstrated the crystallization and simultaneous formation of the nanocone structure on the 1.6 mu m thick amorphous silicon (a-Si) film using a one-step femtosecond laser annealing approach. The a-Si layer is crystallized after the annealing process, as confirmed from their Raman spectra. Meanwhile, the conical structures with diameters ranging from 160 nm to 1.4 mu m are formed upon laser beam irradiation at different fluences, as deduced from scanning electron microscope and atomic force microscope characterization. The highest absorption is achieved when the sample is irradiated with a laser fluence of 588 mJ cm(-2). The developed process has potential applications in the fabrication of high efficiency and low cost Si thin-film solar cells. Moreover, the physics and mechanism involved in the laser annealing process are also discussed.