The performance of copper indium gallium diselenide (CIGS) thin film solar cell has been numerically simulated with different buffer and absorber layers thickness. The cell structure based on CIGS compound semiconductor as the absorber layer, indium sulfide as a buffer layer, un-doped (i) and n-doped zinc oxide as a window layer has been simulated using the simulation program called SCAPS-1D. This study aimed to find the optimum thickness of buffer and absorber layer for a CIGS thin film solar cells with indium sulfide buffer layer. It is found that the optimum thickness of the buffer layer is from 40nm to 50nm and for the absorber layer is in the range of 2000nm to 3000nm.
Perovskite solar cells have emerged as one of the most efficient and low cost technologies for delivering of solar electricity due to their exceptional optical and electrical properties. Commercialization of the perovskite solar cells is, however, limited because of the higher cost and environmentally sensitive organic hole transport materials such as spiro-OMETAD and PEDOT:PSS. In this study, an empirical simulation was performed using the Solar Cell Capacitance Simulator software to explore the MoOx thin film as an alternative hole transport material for perovskite solar cells. In the simulation, properties of MoOx thin films deposited by the electron beam evaporation technique from high purity (99.99%) MoO3 pellets at different substrate temperatures (room temperature, 100 °C and 200 °C) were used as input parameters. The films were highly transparent (>80%) and have low surface roughness (≤2 nm) with bandgap energy ranging between 3.75 eV and 3.45 eV. Device simulation has shown that the MoOx deposited at room temperature can work in both the regular and inverted structures of the perovskite solar cell with a promising efficiency of 18.25%. Manufacturing of the full device is planned in order to utilize the MoOx as an alternative hole transport material for improved performance, good stability, and low cost of the perovskite solar cell.
1 October 2019 in Solar Energy Materials and Solar Cells