Dae-Hun Kwon

Dae-Hun Kwon

Auto-generated profile, based on publicly available information

Dae-Hun Kwon

Inha University

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 August 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
SJSeok-Woo Jeong
Seok-Woo Jeong
SLSeung-Hoon Lee
Seung-Hoon Lee
DKDae-Hun Kwon
Dae-Hun Kwon
JKJi-Yeon Kim
Ji-Yeon Kim
JKJae-Kuk Kim
Jae-Kuk Kim
A two-transformer phase-shift full-bridge (PSFB) converter has features of zero-voltage switching (ZVS) capability, clamped voltage stress of the primary switches and small RMS current. However, when a wide input voltage range is required, the two-transformer PSFB converter operates with extended freewheeling mode. As a result, a large freewheeling current is reflected on the primary side, and it increases primary RMS current. In addition, the freewheeling current flows through high voltage rating diodes, resulting in a large conduction loss. To mitigate this problem, a two-transformer PSFB converter with a new rectifier is proposed in this paper. By employing a diode in the secondary side, the proposed converter reduces the conduction loss. This is because the path of the output current is changed to the freewheeling diode having a low voltage stress. As a result, the proposed converter can use a low voltage rating diode with a low forward voltage drop. In addition, it eliminates the circulating current in the primary side, which reduces the RMS current. Therefore, the proposed converter achieves a high efficiency by reducing the conduction loss. The proposed converter has been verified for a laboratory prototype with 300–400 V input and 12 V/400 W output.

13 March 2025 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
JAJae-Hyun Ahn
Jae-Hyun Ahn
JKJi-Yeon Kim
Ji-Yeon Kim
SJSeok-Woo Jeong
Seok-Woo Jeong
DKDae-Hun Kwon
Dae-Hun Kwon
SLSeung-Hoon Lee
Seung-Hoon Lee
JKJae-Kuk Kim
Jae-Kuk Kim
A phase-shift full-bridge converter with a coupled inductor rectifier (CIR) has been introduced to eliminate the primary circulating current and reduce the voltage stress on rectifier diodes. However, a small magnetizing inductance is inevitably used due to low zero-voltage-switching (ZVS) current, and some diodes still suffer from high voltage stress. In addition, during the freewheeling period, the output current flows through the high voltage-rated diodes. Therefore, high conduction losses occur from the transformer and rectifier diodes. To solve these problems, a new rectifier with low voltage-rated diodes is proposed. Since the ZVS current is increased, large magnetizing inductance can be employed. Furthermore, the output current flows through the low voltage-rated diodes. Consequently, the proposed rectifier effectively reduces conduction losses compared to the conventional CIR. A 700 W prototype was implemented to validate the effectiveness of the proposed converter.

12 November 2025 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
DKDae-Hun Kwon
Dae-Hun Kwon
SJSeok-Woo Jeong
Seok-Woo Jeong
JKJae-Kuk Kim
Jae-Kuk Kim
JLJun-Young Lee
Jun-Young Lee
DLDae-Woo Lee
Dae-Woo Lee
HYHan-Shin Youn
Han-Shin Youn
This article proposes a new integrated battery charging system (IBCS) for electric vehicles, combining a dual-active bridge (DAB) converter for the on-board charger (OBC) and a phase-shift full-bridge (PSFB) converter for the low-voltage dc–dc converter (LDC). Unlike conventional IBCSs, which employ the output inductors and transformer separately, the proposed IBCS integrates them using a two-transformer structure, thereby reducing the overall volume and the number of conducting components on the LDC secondary side. In addition, synchronous rectifiers (SRs) with an optimal driving scheme are introduced to minimize conduction losses. Furthermore, the transformers are designed to optimize the efficiency of the proposed IBCS in both grid-to-vehicle (G2V) and vehicle-to-grid (V2G) modes. These optimizations are based on a detailed analysis, including the coupling effects between the OBC and LDC and the impact of leakage inductances on the OBC primary and secondary sides, which have not been thoroughly addressed in previous studies. As a result, the proposed IBCS can achieve high power density and efficiency. Finally, to validate its performance, a prototype integrating an 11 kW OBC with a 2 kW LDC is built and tested, demonstrating a peak efficiency of 97.1% in both the G2V and V2G modes.

2 September 2025 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
JKJi-Yeon Kim
Ji-Yeon Kim
DKDae-Hun Kwon
Dae-Hun Kwon
JSJae-Hoon Sim
Jae-Hoon Sim
SJSeok-Woo Jeong
Seok-Woo Jeong
JKJae-Kuk Kim
Jae-Kuk Kim
A center-tapped rectifier is widely employed in applications requiring low output voltage and high output current. However, the rectifier diodes experience high voltage stresses, resulting in high conduction losses. To solve this problem, a low voltage-rated freewheeling diode was adopted in previous studies. It improves the overall efficiency by commutating the freewheeling current in the secondary side to the low voltage-rated diode instead of the high voltage-rated diodes. However, the detailed commutation process was not thoroughly explained in the previous studies. Actually, only a small portion of the total freewheeling current flows through a low voltage-rated diode, and most of it still flows through the high voltage-rated diodes, leading to slight improvement in efficiency. Therefore, this article offers the operation principle during the freewheeling interval in detail. Furthermore, it presents two simple methods for increasing the freewheeling current commutated to the low voltage-rated diode. These methods also reduce the circulating current in the primary side, resulting in low overall conduction losses. The article also explains the features and design considerations of each method and topological extensions for other types of rectifiers. Finally, a 250-W prototype is implemented, achieving a 94.8% peak efficiency.

5 December 2025 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
DKDae-Hun Kwon
Dae-Hun Kwon
JKJi-Yeon Kim
Ji-Yeon Kim
JSJae-Hoon Sim
Jae-Hoon Sim
JKJae-Kuk Kim
Jae-Kuk Kim
This article proposes a new flyback-integrated phase-shift full-bridge (PSFB) converter to improve the overall efficiency of the conventional PSFB converters for applications requiring low output voltages and high output currents. It is implemented by replacing the output inductor with a coupled inductor and connecting its secondary side to the output in a flyback configuration. During the freewheeling period, the proposed converter transfers the energy stored in the coupled inductor to the output via the flyback circuit, consisting of only one coupled inductor winding and a low-voltage-rated diode. This provides the following main advantages: 1) elimination of the circulating current; 2) a lower forward voltage drop on the freewheeling diode; and 3) a reduced number of conducting components. Consequently, power losses on both the primary and secondary sides are significantly reduced. To validate the effectiveness of the proposed converter, a 300 W prototype was designed and tested. Experimental results confirmed an improvement in overall efficiency compared with the conventional converters, achieving 0.8% and 2.2% higher efficiency than the center-tapped rectifier and coupled inductor rectifier, respectively, under full-load conditions.

1 January 2026 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
JAJae-Hyun Ahn
Jae-Hyun Ahn
DKDae-Hun Kwon
Dae-Hun Kwon
JKJae-Kuk Kim
Jae-Kuk Kim