14 December 2021 in Optics Letters
We propose and demonstrate a new scheme for enhancing the sensitivity of an optical fiber vibration sensor based on microwave interferometry, which is realized by an incoherent optical Michelson interferometer (MI). The sensing arm of the MI is sensitive to environmental vibration; this will cause changes in the phase of the reflection spectra in the microwave domain. The phase sensitivity can be improved by adjusting the power ratio of the two beams in the interferometer and the driving frequency of the modulator. The system can overcome the problem of interference fading so that it is immune to environmental disturbance. The proposed scheme has merits of simplicity and compact configuration, and may provide a new type of high-precision fiber sensor for measuring vibration, temperature, strain, and so on.
10 January 2022 in Journal of Lightwave Technology
A taper-based in-line Mach-Zehnder interferometer (MZI) coated with the magnetic fluids (MFs) is designed and experimentally verified for the highly sensitive magnetic field measurement. The effect of waist diameter on the characteristic parameters of transmission modes is numerically analyzed by the finite element method (FEM). The sensing MZI (S-MZI) with a waist diameter of ∼8.92 μm is fabricated, in which the multi-mode interference occurs between the fundamental mode (HE11) and cladding modes (HE21 and TM01 modes). The S-MZI has the average sensitivities of 1.180 and 1.305 nm/mT near 1550 nm as the magnetic field increases and decreases in the range of 10.15∼30.44 mT. In order to further improve the measurement sensitivity of the magnetic field, a cascaded MZI (C-MZI) based on the Vernier effect is proposed, which is composed of a reference MZI (R-MZI) without MFs connected in series with the above S-MZI. An evident envelope and shift influenced by the external magnetic field is observed in the transmission spectra of the C-MZI, resulting in the sensitivity being elevated by an amplification factor. The C-MZI shows the average sensitivities of −5.148 and −5.782 nm/mT near 1500 nm, respectively, being ∼4.77 and 4.83 times of those in the single S-MZI. Therefore, the proposed device may have broad applications in the magnetic field measurement in view of the advantages of high sensitivity, low cost, small volume, and simple fabrication.
26 April 2024 in ACS Photonics
3 April 2025 in Optics Express
Thin-film lithium niobate (TFLN) has gained significant attention as a platform for photonic integrated circuits (PICs) due to its exceptional properties, including high nonlinear coefficients and a strong electro-optic response. However, efficient coupling between TFLN chips and optical fibers remains a challenge, with current edge coupler designs often facing issues related to fabrication complexity and alignment precision. In this paper, we propose a high-efficiency, fabrication-friendly, and alignment-tolerant bident edge coupler based on TFLN to overcome these limitations. The design comprises three distinct regions: the facet coupling region, the beam combining region, and the adiabatic taper region. It achieves a measured coupling efficiency of better than -1.52 dB per facet at 1550 nm, with an average efficiency ranging from -1.85 to -1.6 dB across the C-band, and a mode field diameter of approximately 4 μm. Notably, the coupler offers a large alignment tolerance of ±1 μm. This design simplifies the fabrication process, requiring only a single overlay step. The proposed coupler offers a practical solution for optical interface packaging in TFLN devices, enabling high performance with low process complexity.
14 March 2025 in Optics Express
Lithium niobate on insulator (LNOI) has emerged as a transformative platform for integrated photonics, combining the exceptional material properties of lithium niobate with the compactness and scalability of modern photonic technologies. While traditional waveguide bend designs for LNOI face challenges such as bending losses, mode mismatch, and fabrication complexity, this study introduces an approach leveraging B-spline curves for multimode waveguide bend optimization. B-spline curves offer unparalleled design flexibility, enabling precise control of curvature profiles, smooth transitions, and simultaneous optimization of insertion loss (IL) and mode crosstalk (CT). Experimental results demonstrate that 90° B-spline-based waveguide bends achieve ultra-low insertion losses of 0.05 dB, 0.10 dB, and 0.29 dB for TE0, TE1, and TE2 modes, respectively, with crosstalk below -16.71 dB across all modes for cascaded bends. These results suggest that B-spline-based designs hold promise for enabling high-performance multimode waveguides, offering a potential solution to key challenges in LNOI photonic integrated circuits.
19 June 2025 in ACS Photonics