We have proposed and experimentally demonstrated a high-precision and temperature-compensated magnetic field sensor based on two optoelectronic oscillators (OEOs) incorporating cascaded magnetostrictive alloy-fiber Bragg grating (MA-FBG) and FBG filters. The optical sources are provided by the reflection signals of two FBGs. The optical source wavelength is related to the overall time delay of the OEO loop which determines the oscillating frequency of OEO. The central wavelengths of MA-FBG and FBG change along with the magnetic field and temperature. Therefore, we can estimate the magnetic field and temperature by measuring the oscillating frequencies of OEOs, simultaneously. Besides, since two OEOs are grouped into a cross-referencing structure by wavelength division multiplexing under the same environment, the magnetic field sensor can reduce the influence of temperature. The proposed sensor for magnetic field and temperature with sensitivities of 250 Hz/Oe and 1.97 or 1.42 kHz/°C are achieved. The maximum measurement errors of magnetic field and temperature obtained are within 22 Oe and 0.2°C. The proposed scheme has merits of simplicity and compact configuration. It can realize high-speed and high-resolution measurement, which has potential applications in magnetic field sensing.
We propose and demonstrate a new scheme for enhancing the sensitivity of an optical fiber vibration sensor based on microwave interferometry, which is realized by an incoherent optical Michelson interferometer (MI). The sensing arm of the MI is sensitive to environmental vibration; this will cause changes in the phase of the reflection spectra in the microwave domain. The phase sensitivity can be improved by adjusting the power ratio of the two beams in the interferometer and the driving frequency of the modulator. The system can overcome the problem of interference fading so that it is immune to environmental disturbance. The proposed scheme has merits of simplicity and compact configuration, and may provide a new type of high-precision fiber sensor for measuring vibration, temperature, strain, and so on.
We propose to employ the image deconvolution technique for Brillouin optical time domain reflectometry (BOTDR) systems to achieve a flexible and enhanced spatial resolution with pump pulses longer than phonon lifetime. By taking the measured Brillouin gain spectrum (BGS) distribution as an image blurred by a point spread function (PSF), the image deconvolution algorithm based on the two-dimensional Wiener filtering can mitigate the ambiguity effect on the Brillouin response. The deconvoluted BGS distribution reveals detailed sensing information within shorter fiber segments, improving the inferior spatial resolution and simultaneously maintaining other sensing performance parameters. Thanks to the proposed technique, a typical BOTDR sensor with 40 ns pump pulses reaches a submetric spatial resolution as high as 10 cm. Compared to the differential-spectrum-based BOTDR retrieving the same spatial resolution, the image deconvolution technique shows advantages in system complexity and measurement uncertainty. Moreover, the proposed technique is promising to improve the spatial resolution of other distributed optical fiber sensing (DOFS) techniques such as BOTDR systems with complex pump modulation methods.
We experimentally demonstrate a novel optical fiber chemosensor for trace Cu2+ ions detection that is implemented by using an in-line optical fiber Mach–Zehnder interferometer (MZI) in conjunction with an optoelectronic oscillator (OEO). The MZI is fabricated by lateral offset splicing a section of D-shaped fiber between two single-mode fibers. It splices the broadband optical source into a sinusoidal-shaped light, which can form a single passband microwave photonic filter (MPF) by combining the Mach–Zehnder modulator, a segment of fiber and a photodetector. The center frequency of the MPF, determined by the free spectra range of MZI, is affected by the solution concentration. Incorporating the MPF in the OEO sensor, the oscillation frequency is determined by the solution concentration. Therefore, we can estimate the solution concentration by measuring the microwave frequency change. We carry out a proof to concept experiment. High sensitivity Cu2+ ions concentration sensing with sensitivity of 13 Hz/(μM/L) is achieved. The maximum measurement error of concentration obtained is within 1.38 μM/L. The proposed sensor has merits of high interrogation speed, simple operation, high sensitivity and accuracy, offering the potentials in a wide range of biological application scenarios.
10 January 2022 in Journal of Lightwave Technology
A taper-based in-line Mach-Zehnder interferometer (MZI) coated with the magnetic fluids (MFs) is designed and experimentally verified for the highly sensitive magnetic field measurement. The effect of waist diameter on the characteristic parameters of transmission modes is numerically analyzed by the finite element method (FEM). The sensing MZI (S-MZI) with a waist diameter of ∼8.92 μm is fabricated, in which the multi-mode interference occurs between the fundamental mode (HE11) and cladding modes (HE21 and TM01 modes). The S-MZI has the average sensitivities of 1.180 and 1.305 nm/mT near 1550 nm as the magnetic field increases and decreases in the range of 10.15∼30.44 mT. In order to further improve the measurement sensitivity of the magnetic field, a cascaded MZI (C-MZI) based on the Vernier effect is proposed, which is composed of a reference MZI (R-MZI) without MFs connected in series with the above S-MZI. An evident envelope and shift influenced by the external magnetic field is observed in the transmission spectra of the C-MZI, resulting in the sensitivity being elevated by an amplification factor. The C-MZI shows the average sensitivities of −5.148 and −5.782 nm/mT near 1500 nm, respectively, being ∼4.77 and 4.83 times of those in the single S-MZI. Therefore, the proposed device may have broad applications in the magnetic field measurement in view of the advantages of high sensitivity, low cost, small volume, and simple fabrication.
We have proposed and experimentally demonstrated a high-precision and strain-insensitive temperature sensor based on an optoelectronic oscillator (OEO). The oscillation frequency of the OEO is determined by the single passband microwave photonic filter (MPF) by using stimulated Brillouin scattering (SBS). The sensing fiber, which acts as the SBS gain medium, is exposed to temperature variations. The Brillouin frequency shift (BFS) changes along with the temperature. Since the central frequency of the MPF is a function of the BFS, the oscillation frequency of the OEO is varied. Besides, due to the mode competition in the OEO, the influence of the strain is eliminated. Thus, the temperature variations can be estimated through measuring the oscillation frequency. We carry out a proof-to-concept experiment. Temperature sensing with a high sensitivity of 1.00745 MHz/°C is achieved. The maximum measurement error of temperature obtained is within ± 0.5 °C. The proposed scheme has merits of simplicity and compact configuration. In addition, the proposed temperature sensor can realize quasi-distributed measurement by utilizing wavelength division multiplexing (WDM).