Wei Tian

Wei Tian

Auto-generated profile, based on publicly available information

Wei Tian

Chair of High-Power Converter Systems, Technical University of Munich, Munich, Germany

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 March 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
XLXinyue Li
Xinyue Li
WTWei Tian
Wei Tian
XGXiaonan Gao
Xiaonan Gao
QYQifan Yang
Qifan Yang
Ralph KennelRalph Kennel
Ralph Kennel
A predictive current controller is established based on the system model and, therefore, suffers from the problems, such as parameter mismatches, digital delay, and external disturbances. In order to tackle these problems, an observer-based robust predictive current control strategy is proposed in this article, which employs an extended state observer to estimate the disturbances, currents, and applies the augmented system model for the design of the controller. It is generally formulated and applicable to any ac motor drive system as long as the prerequisites are satisfied. Furthermore, the proposed control scheme is proven to be input-to-state stable with a proper design of the controller and the observer. The effectiveness of the proposed control strategy is moreover verified with numerous experiments on a dSPACE system under various test scenarios. The comparative studies between the proposed method and the predictive current control approaches, i.e., the conventional deadbeat control and the continuous control set model predictive control, are conducted at different operating conditions.

3 July 2023 in IEEE Open Journal of Power Electronics
Verified
Journal Article
Open access
Ibrahim HarbiIbrahim Harbi
Ibrahim Harbi
Jose RodriguezJose Rodriguez
Jose Rodriguez
APAmirreza Poorfakhraei
Amirreza Poorfakhraei
Hani VahediHani Vahedi
Hani Vahedi
MGMiguel Guse
Miguel Guse
Ralph KennelRalph Kennel
Ralph Kennel
Multilevel converters (MLCs) are widely recognized for their exceptional benefits and have emerged as the preferred choice for medium- and high-power/voltage applications. Their usage has also been extended to low-power applications to overcome issues associated with high switching frequencies and electromagnetic interference (EMI) commonly encountered in two-level converters. Common dc-link MLCs have received particular attention in industry due to their ability to eliminate the need for bulky and inefficient transformers and rectifiers, making them a compelling option for different applications, primarily medium- and high-power/voltage applications such as wind turbine (WT) power conversion systems. Furthermore, common dc-link topologies are required for back-to-back (BTB) configurations, as they facilitate the use of a shared dc-link between the rectification and inversion stages. Despite their popularity, there is currently no comprehensive review article dedicated to common dc-link topologies. This paper addresses this gap by presenting a comprehensive review of common dc-link MLCs, covering their topological evolution, features, topologies comparison, modulation techniques, control strategies, and industrial application areas. Additionally, future perspectives and recommendations are discussed to provide researchers and engineers with a better understanding of the potential applications and advantages of these converters.

24 September 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
QYQifan Yang
Qifan Yang
PKPetros Karamanakos
Petros Karamanakos
WTWei Tian
Wei Tian
XGXiaonan Gao
Xiaonan Gao
XLXinyue Li
Xinyue Li
Ralph KennelRalph Kennel
Ralph Kennel
This article presents a direct model predictive control (MPC) method for drive systems with superior steady-state and dynamic performance. Specifically, the discussed MPC algorithm achieves a steady-state behavior that is similar or better than that of a linear controller with a dedicated modulator, and fast transient responses that characterize direct controllers. Moreover, it ensures a fixed switching frequency by allowing for one switching transition per phase and sampling interval. Furthermore, the controller utilizes the stator current gradient to predict the evolution of the drive system within the prediction horizon. To find the optimal switching time instants—and thus ensure favorable performance—the control and modulation problems are formulated in one computational stage as a constrained quadratic program (QP). To solve the latter within a few microseconds, a computationally efficient QP solver based on a gradient method is proposed that enables the real-time implementation of the presented algorithm. To further alleviate the computational demands of the proposed method, a mechanism that can identify suboptimal switching sequences at the very early stages of the optimization process is proposed. The effectiveness of the proposed control scheme is experimentally verified on a 3 kW drive system consisting of a two-level inverter and an induction machine.

18 December 2019 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
GPGenji Pei
Genji Pei
JLJiaxi Liu
Jiaxi Liu
XGXiaonan Gao
Xiaonan Gao
WTWei Tian
Wei Tian
Liyi LiLiyi Li
Liyi Li
RKRalph Kennel
Ralph Kennel
The deadbeat predictive current control (DPCC) of permanent magnet synchronous motors (PMSMs) is well known for its simple structure and fast dynamic. However, it is sensitive to parameter mismatches and the system delays, which become more serious at low switching frequency. To handle such problems, this paper proposes an accurate deadbeat control method based on an exact model of surface-mounted PMSM in stationary two-phase frame with a moving horizon estimator (MHE). The motor model is obtained from the differential equations, and the transformations between stationary frame and rotating frame are reduced to eliminate the influence of the lag of electrical angle. MHE is utilized to estimate the back-EMF and disturbance caused by parameter variations. The rotor flux is eliminated in the algorithm and the resistance and inductance mismatches are compensated by the estimator. Several simulations and experiments are performed in three methods, the conventional DPCC in rotating dq-axis, DPCC in αβ-axis with the accurate model and the proposed method. These comparisons validate that the proposed method can eliminate the current tracking errors at low switching frequency and a strong robustness to parameter variations.

7 October 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
XLXinyue Li
Xinyue Li
QYQifan Yang
Qifan Yang
WTWei Tian
Wei Tian
PKPetros Karamanakos
Petros Karamanakos
Ralph KennelRalph Kennel
Ralph Kennel
The parameter mismatch problem has a great impact on the control performance of model predictive control, which is however unavoidable during the operation. In order to improve the system robustness against the parameter mismatches and disturbances, an improved direct model predictive current control with a disturbance observer is proposed in this article, where the disturbance observer is realized by an incremental moving horizon estimator. Moreover, another concern raised from the applications of direct model predictive current control is the computational burden, especially for the long-horizon implementations. Therefore, a dual reference frame solution for the surface permanent-magnet synchronous motor (SPMSM) is proposed in this article to allocate a great proportion of heavy computations required for the optimization problem to the offline preparation, which can reduce the computational burden by almost 50% on average for a prediction horizon of five time-steps. Besides, the parameter mismatch effects of individual electrical parameters on the control performance of the model predictive direct current control method are investigated and quantified via simulations. A five-step direct model predictive current control is implemented on a dSPACE system with a sampling frequency of 20 kHz to validate the effectiveness of the proposed scheme with an SPMSM drive system.

11 October 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
XLXicai Liu
Xicai Liu
WWWang Wang
Wang Wang
XGXiaonan Gao
Xiaonan Gao
WTWei Tian
Wei Tian
LZLibing Zhou
Libing Zhou
Ralph KennelRalph Kennel
Ralph Kennel
This article proposes a continuous control set predictive speed control (CCS-PSC) strategy for surface-mounted permanent magnet synchronous motor (SPMSM) drives, where the prediction horizon is short and the computational complexity is low. The optimization problem of the proposed CCS-PSC is formulated and analyzed. The current and voltage constraints are transformed into incremental voltage constraints, which can be updated in real-time. A reduced-order incremental model of SPMSM is adopted for the prediction, where integrators are naturally embedded. Hildreth’s quadratic programming algorithm is used to solve the optimization problem, where the active constraints are identified and the reference voltage is calculated. The performance of the proposed strategy is validated through comparative experiments with finite control set predictive speed control (FCS-PSC), cascaded CCS-PSC and field-oriented control. The results demonstrate the superb dynamic performance of the proposed CCS-PSC strategy, while the phase current total harmonic distortion is relatively low.