Mousa Karimi

Mousa Karimi

Auto-generated profile, based on publicly available information

Mousa Karimi

Department of Electrical and Computer Engineering, The Heterogeneous Integration Knowledge (THInK) Team, McGill University, Montreal, QC, Canada

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 July 2021 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
MKMousa Karimi
Mousa Karimi
Mohamed AliMohamed Ali
Mohamed Ali
Ahmad HassanAhmad Hassan
Ahmad Hassan
Mohamad SawanMohamad Sawan
Mohamad Sawan
Benoit GosselinBenoit Gosselin
Benoit Gosselin
In this study, a dead-time control circuit is proposed to generate independent delays for the high and low sides of half-bridge converter switches. In addition to greatly decreasing the losses of power converters, the proposed method mitigates the shoot-through current through the application of superimposed power switches. The circuit presented here comprises a switched capacitor architecture and is implemented in AMS 0.35 $\mu \text{m}$ technology. In the implementation, the proposed dead-time control circuit occupies a silicon area of $70\,\,\mu \text{m}\,\,\times 180\,\,\mu \text{m}$ . To realize the technique, a two-sided wide swing current source is employed. Each sides of the current source comes with two capacitors, two Schmitt triggers, and three transmission gates. Results show that the low and high sides of the projected half-bridge converter switches respectively require delays of 35 and 62 ns. The performance of the proposed dead-time circuit is evaluated by assembling it with the half-bridge converter. The proposed dead-time prototype achieves a 40% drop in power losses in the half-bridge circuit.

14 February 2023 in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
Verified
Journal Article
Closed access
MKMousa Karimi
Mousa Karimi
AMAtaollah Saeed Monir
Ataollah Saeed Monir
RMRezvan Mohammadrezaee
Rezvan Mohammadrezaee
BVBoris Vaisband
Boris Vaisband
A novel spiking neuromorphic architecture is presented in this paper. The architecture is based on charge-trap transistors (CTTs) which are experimentally-verified compute-in-memory devices. The proposed low-power scalable architecture targets large neural network applications, such as machine learning tasks and emulation of brain connectivity networks. Data within the proposed architecture is encoded using a number of spikes approach. The CTT-based synapses receive Gaussian spikes, the most energy-efficient waveform for communication, as inputs from other neurons, the spikes are multiplied by synaptic weights and accumulated. The neuron, designed using a leaky integrate and fire model, generates a similar spike at the output. The proposed architecture is compared to literature and exhibits superior parameters. The neuron (including the synaptic array) occupies an area of 178.25 μm 2 , supporting 5.6k neurons and 560k synapses per mm 2 , as well as exhibits low energy per synaptic operation of 8 pJ. To validate the proposed architecture, a single neuron was designed and evaluated as a binary classifier for two numbers from the MNIST data set. The accuracy, recall, and precision of the hardware neuron for the binary classification task are, respectively, 99.2%, 99.5%, and 98.6% (similar to results from other reported works).

7 July 2022 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
MKMousa Karimi
Mousa Karimi
Mohamed AliMohamed Ali
Mohamed Ali
AAAmir Aghajani
Amir Aghajani
Ahmad HassanAhmad Hassan
Ahmad Hassan
Mohamad SawanMohamad Sawan
Mohamad Sawan
Benoit GosselinBenoit Gosselin
Benoit Gosselin
This paper presents a tunable new deadtime control circuit providing an optimal delay for power converter optimization. Our method can reduce the deadtime loss while improving the efficiency and power density of a given power converter. The circuit presents a reconfigurable delay element to generate a wide range of deadtime for different power conversion applications with varying loads and input voltages. The optimal deadtime equation for buck converters is derived, and its dependency on the input voltage and load is discussed. Experimental results show that the presented circuit can provide a wide range of deadtime delays, ranging from 9.2 ns to 1000 ns. The power consumption of the presented circuit is measured for different capacitive loads ( $\text{C}_{\mathrm {L}}$ ) and operating frequencies ( ${f}_{\mathrm {s}}$ ). The circuit consumed a power between 610 $\mu \text{W}$ and $850~\mu \text{W}$ across the measured deadtime ranges while $\text{C}_{\mathrm {L}} =12$ pF, $\text{V}_{\mathrm {dd}} =3.3$ V, and $\text{f}_{\mathrm {s}}=200$ kHz. The proposed deadtime generator can operate up to 18 MHz when the minimum deadtime of 9.2 ns is selected. The presented circuit occupies an area of $150\mu $ m $\times 260\mu \text{m}$ . The fabricated chip is connected to a buck converter to validate the operation of the proposed circuit. The efficiency of a typical buck converter with minimum $\text{T}_{\mathrm {DLH}}$ and optimal $\text{T}_{\mathrm {DHL}}$ at $\text{I}_{\mathrm {Load}} =25$ mA is improved by 12% compared to a converter with a fixed deadtime of $\text{T}_{\mathrm {DLH}} =\,\,\text{T}_{\mathrm {DHL}} =12$ ns.

1 December 2022 in IEEE Access
Verified
Journal Article
Open access
MKMousa Karimi
Mousa Karimi
Mohamed AliMohamed Ali
Mohamed Ali
Ahmad HassanAhmad Hassan
Ahmad Hassan
RBReza Bostani
Reza Bostani
BVBoris Vaisband
Boris Vaisband
Benoit GosselinBenoit Gosselin
Benoit Gosselin
A novel level shifter (LS) circuit that uses a new low-power approach based on a parasitic capacitance voltage controlled current source is presented to minimize the propagation delay (PD) and maximize the voltage conversion range. This new scheme uses a simplified circuit including a dependent current source, a composite transistor made of three interconnected n-channel MOSFETs (TnM), one CMOS input inverter, and one CMOS output buffer to provide a fast response time. The circuit utilizes the combined action of the equivalent parasitic capacitance of the TnM, the value of which changes dynamically according to the transient value of the input voltage, and the dependent current source to shift the input signal level up from subthreshold voltage levels to +3.0 V, with minimal delay and power consumption. The LS circuit fabricated in 0.35 μm CMOS technology occupies a silicon area of only 25 μm×25 μm. The LS shows measured rising and falling PDs of, respectively, 4 and 11.2 ns. The measured results show that the presented circuit outperforms other solutions over a wide frequency range of 1 to 130 MHz. The fabricated circuit consumes a static power 31.5 pW and a dynamic power of 3.4 pJ per transition at 1 kHz, V DDL =0.8 V, and a capacitive load of C L =0.1 pF.

31 January 2025 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
HHHadi Hayati
Hadi Hayati
SASaeed Ghaneei Aarani
Saeed Ghaneei Aarani
MKMousa Karimi
Mousa Karimi
EREskandari Razieh
Eskandari Razieh
Mohamad SawanMohamad Sawan
Mohamad Sawan
Benoit GosselinBenoit Gosselin
Benoit Gosselin
This paper presents an impulse radio ultra-wideband (IR-UWB) transmitter (TX) designed for miniature multi-channel neural recording platforms in freely moving laboratory animals. We introduce a 5-bit data-to-time modulation technique utilizing a 5-cell capacitive array. This approach minimizes the data rate’s dependency on pulse repetition frequency, while significantly reducing power dissipation and simplifying the TX’s architecture. Measurement results with the TX fabricated in TSMC 65-nm standard CMOS technology show that the proposed circuit provides a linear time change in the pulsewidth with a time step of 84 ps in average for every least significant bit in the input. Furthermore, the entire circuit consumes only 422 µW from a 0.65-V supply. The proposed TX achieves a significantly low energy consumption of 1.05 pJ/bit at 400 Mbps in a 0.5-m transmission range. The fabricated circuit occupies 0.255 mm2 of die area including pads.

5 June 2023
Verified
Conference Paper
Open access
OGOkyanus T. Gumus
Okyanus T. Gumus
MKMousa Karimi
Mousa Karimi
BVBoris Vaisband
Boris Vaisband
In this work, a novel digital leaky integrate-and-fire neuron design is proposed as part of a charge-trap transistor (CTT)-based neuromorphic system. CTTs, which are compute-in-memory devices, are used to realize the synaptic array of the neuron and support weight multiplication operations for incoming pulse signals. The proposed digital neuron does not rely on a capacitor for accumulation, making it area-efficient and scalable, and thus useful for design of large spiking neural networks. The neuron accumulates the weighted inputs from the synaptic array and generates an outgoing pulse, i.e., fires, when a pre-set threshold is reached. The digital neuron includes a sampler circuit, multi-level comparator, pulse generator, leaky circuit, 3-bit counter, and digital comparator circuit. Since the circuit is digital, the design is robust to noise, mismatch, and process, voltage, and temperature variations. The digital neuron is designed in GF 22 nm FDSOI technology, operates at a supply voltage of 0.8 V, and occupies an area of 33.5 μ m2. The neuron was simulated, including under temperature and supply voltage variations, and exhibits expected functionality.