Department of Electrical Engineering Pohang University of Science and Technology 77, Cheongam‐ro, Nam‐gu Pohang‐si Gyeongsangbuk‐do 37673 Republic of Korea
Auto-generated profile, based on publicly available information
Cihyun Kim
Department of Electrical Engineering Pohang University of Science and Technology 77, Cheongam‐ro, Nam‐gu Pohang‐si Gyeongsangbuk‐do 37673 Republic of Korea
The performance of a graphene/Ge Schottky junction near‐infrared photodetector is significantly enhanced by inserting a thin Al 2 O 3 interfacial layer between graphene and Ge. Dark current is reduced by two orders of magnitudes, and the specific detectivity is improved to 1.9 × 10 10 cm ⋅ Hz 1/2 W −1 . The responsivity is improved to 1.2 AW −1 with an interfacial layer from 0.5 AW −1 of the reference devices. The normalized photo‐to‐dark current ratio is improved to 4.3 × 10 7 W −1 at a wavelength of 1550 nm, which is 10–100 times higher than those of other Ge photodetectors.
30 September 2022 in Advanced Materials Interfaces
A graphene photodetector decorated with Bi2Te3 nanowires (NWs) with a high gain of up to 3 × 104 and wide bandwidth window (400–2200 nm) has been demonstrated. The photoconductive gain was improved by two orders of magnitude compared to the gain of a photodetector using a graphene/Bi2Te3 nanoplate junction. Additionally, the position of photocurrent generation was investigated at the graphene/Bi2Te3 NWs junction. Eventually, with low bandgap Bi2Te3 NWs and a graphene junction, the photoresponsivity improved by 200% at 2200 nm (~0.09 mA/W).
The structure of a gate‐controlled graphene/germanium hybrid photodetector was optimized by splitting the active region to achieve highly sensitive infrared detection capability. The strengthened internal electric field in the split active junctions enabled efficient collection of photocarriers, resulting in a responsivity of 2.02 A W −1 and a specific detectivity of 5.28 × 10 10 Jones with reduced dark current and improved external quantum efficiency; these results are more than doubled compared with the responsivity of 0.85 A W −1 and detectivity of 1.69 × 10 10 Jones for a single active junction device. The responsivity of the optimized structure is 1.7, 2.7, and 39 times higher than that of previously reported graphene/Ge with Al 2 O 3 interfacial layer, gate‐controlled graphene/Ge, and simple graphene/Ge heterostructure photodetectors, respectively.