Aizhan Dilmanova

Aizhan Dilmanova

Auto-generated profile, based on publicly available information

Aizhan Dilmanova

Korkyt Ata Kyzylorda university

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 December 2022 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
SUSaken Uderbayev
Saken Uderbayev
ADAizhan Dilmanova
Aizhan Dilmanova
СНСактаганова Наргуль
Сактаганова Наргуль
ABAigul Budikova
Aigul Budikova
YBYerik Bessimbayev
Yerik Bessimbayev
The paper presents the results of the influence on shrinkage deformations of the adopted composition during the drying and firing of ceramic bricks made using rice husk and ash of the combined heat and power plant of the city of Kyzylorda of the Republic of Kazakhstan. The optimal values of the husk additives content and ash from thermal power plants in the studied compositions were determined. Ash dumps from thermal power plants (TPP) create environmental tension and pose a great threat to both the environment and human health. It was found that the hydro-removal ash from the thermal power plant mainly consists of oxides of silica (45.45…46.37 %) and alumina (16.62…17.70 %), there are oxides of calcium (1.66…2.20 %), magnesium (0.86…1.12 %), iron (2.98…3.41 %) and alkali metals (0.80…1.04 %). The composition of ceramic bricks based on loess-like loam, rice husks, and ash from thermal power plants was studied. The charge composition of the raw components of the “clay, TPP ash, and rice husk” brick: clay is 71…75 %, TPP ash is 18…22 %, and rice husk is 2…6 % of the total mass of the components of the raw mixture of ceramic bricks. The compressive strength of fired ceramic bricks was 11…12 MPa. According to the results of experimental studies, it was found that the increased concentration of rice husks in natural mixtures is characterized by a stable increase in ceramic mass drying cracks. The increase in time until the appearance of drying cracks is 100 up to 160 sec. The resulting ceramic brick in accordance with the developed composition has a low weight, good thermal properties and meets the standard requirements for ceramic bricks according to GOST 530-2012

30 June 2026 in Bulletin of Kazakh Leading Academy of Architecture and Construction
Verified
Journal Article
Closed access
SUSaken Uderbayev
Saken Uderbayev
GAG. Abiyeva
G. Abiyeva
ADA.T. Dilmanova
A.T. Dilmanova
DPD. Popov
D. Popov
GZG. Zhakapbayeva
G. Zhakapbayeva
This study examines the feasibility of producing sustainable ceramic materials from locally available loess-like loam, fly ash from a thermal power plant, liquid glass, and ground rice husk. The work is motivated by two parallel challenges: the need to reduce the consumption of high-quality clay in traditional ceramic production and the need to valorize industrial and agricultural wastes that are otherwise landfilled, stockpiled, or openly burned. In the proposed system, loess-like loam serves as the basic aluminosilicate matrix, fly ash acts as a fine mineral component rich in silica and alumina, liquid glass functions as a fluxing and structure-promoting additive, and rice husk plays a dual role as an internal fuel and a silica-bearing pore-forming modifier during firing. The investigated raw mixes contained 40.0–53.5 wt.% loess-like loam, 42.0–52.0 wt.% fly ash, 4.0–6.0 wt.% liquid glass, and 0.5–2.0 wt.% ground rice husk. Samples were prepared by semi-dry pressing and fired at 900–1000 °C. According to the reported experimental results, the developed compositions achieved compressive strengths in the range of 28–35 MPa, water absorption of 15–18%, and frost resistance up to 62 freeze–thaw cycles. Compared with the reference composition, the modified ceramic system showed a broader high-strength range, lower water absorption, and better frost durability. SEM observations revealed a denser microstructure in the modified compositions, while XRD analysis confirmed the formation of quartz, cristobalite, mullite, anorthite, and hematite phases. The results demonstrate that the combined use of fly ash and rice husk contributes to matrix densification, improved durability characteristics, and effective utilization of industrial and agricultural waste in ceramic production.